Mercedes the bastards… my van also has this problem.
@tornadobalkan414210 ай бұрын
How do we proof that lcd is a problem what if it is the fuse
@phlinhares608011 ай бұрын
hi sir! i am from brazil. So i have a car like that, but we have this displays to sell... so i need of this displays like your… Could you help me to have a one.. I woud like to have the contact of the auto car shopping..
@phlinhares608011 ай бұрын
I want to say. A don’t have this display in Brasil. Pls could you text where I can to buy
@yyiiuu3211 Жыл бұрын
👍🏻
@donknow5066 Жыл бұрын
After changing battery to higher amps and changing LCD screens, it remains a "On & Off" thing. I suspect is moisture in LCD and main board connection. Spray some electrical lubricants on the main board, switches and resistors and observe. Hope it helps.
@gorag49412 ай бұрын
Just curious if you have tried it and did it help? I replaced my LCD but still the same problem. I was told it is an issue with LED Back Lights not working. And how did you change the battery for higher amps? Where is it located?
@shrewdinvestor1114 Жыл бұрын
Should we sue Mercedes like DIESEL GATE!
@richardmurphy577 Жыл бұрын
Very good demarcation on how to fit . Thanks very much for video 😊
@angelsautoglass5922 Жыл бұрын
Yeah this didn't work for me the display is still not working purchase new display for mini tools they warned me that it's the motherboard didn't listen I purchased the new screen installed it still same issue same problem screen not working waste of time misleading information
@ebciv6616 Жыл бұрын
I have the same issue on a 2016 and spoke to the guys at minitools about a new lcd. they confirmed that it is not the lcd, but rather a resistor on the motherboard. They have a bench test kit and replacement resistor, but unless you are proficient at de-solder and soldering it's a difficult repair, at best. Now I'm looking for a used, complete instrument cluster vs a new one for $1350 at MB parts.
@richacko8115 Жыл бұрын
In the uk. Beware, the screen is also held in with 4 screws on the back of the lcd screen and you only need to undo the ribbon from the back of the cluster, the black clip slides down and is easier 😉
@pavelplaxin58072 жыл бұрын
kzbin.info/www/bejne/h3vGlnWKlr2dnaM 0:46
@isayilmaz19692 жыл бұрын
🙏🙏🙏😥
@RocketSailing2 жыл бұрын
I could not remove my display. Vito 2015. Something else than the tabs holding it down underneath. Probably som glue? Got it halfway up on both sides. Then The white plastic started to crac. And force needed was very, very uncomfortable..
@nicklong72132 жыл бұрын
I have the same problem on my Metris and will repair as you have. Thank you for making this!
@PatrykRElektronika2 жыл бұрын
Unfortunately that's just a waste of time and €90.25 (current price @ minitools) plus VAT plus shipping. It DOES not cure the problem. Here in the UK the proper repair costs £239 with a lifetime warranty. 1 day turnaround or while you wait repair in Dorset.
@richacko8115 Жыл бұрын
Where abouts
@giftelectricalUK Жыл бұрын
Quoted £675 plus labour ls vat for same issue. Ordered screen for £47 going to try that first and see if it works
@giftelectricalUK Жыл бұрын
From Mertrux themselves by the way
@PatrykRElektronika Жыл бұрын
@@giftelectricalUK Let us know. Current repair price in UK is £250 incl shipping, no VAT on top of that.
@Only-one-life-6817 күн бұрын
@@giftelectricalUK Funnily enough bought our 65 plate Vito 119 from derby mertrux.. The display has just packed up.. Looks like we need to speak to them get a price and booked in..
@ahmadmattar90612 жыл бұрын
Great video
@DesiOutdoors2 жыл бұрын
Hi , my display screen works but it does not illuminate
@stawte2 жыл бұрын
Like others here on the comments section, I've replaced it, but it doesn't work. Some people mentioned about a resistor on the motherboard. Does anybody knows which one is? Thanks.
@andreimocanu86802 жыл бұрын
Hello, did you fix the issue?
@nelsonsuh29923 жыл бұрын
If you are very Lucky, maybe you don't have this stupid problem. If not you are like me. It's not display problem. Don't waste your time. Take it to dealer they will fix for 2k. You know what this piece is garbage not worth to fix it.
@totaltronics87752 жыл бұрын
It is worth fixing, just not by replacing the screen. Repair in UK costs £239.
@Only-one-life-6817 күн бұрын
@@totaltronics8775 We’re can u get in repaired in Uk 🇬🇧
@salravat26453 жыл бұрын
Great video thanks! The problem I have is that my screen is temperamental. So sometimes it's black. Sometimes it's flickering and sometimes it's on like there is nothing wrong with it which leads me to believe the screen itself is possibly fine. Maybe there are 2 different problems folks are having🤷♂️ But any updates regarding this issue will be greatly appreciated 👍
@totaltronics87752 жыл бұрын
Screen itself is always fine, never seen any faulty .
@Spedley_2142 Жыл бұрын
Mine too. Screen started working again for about an hour but not since. Seems to me like it isn't the screen - backlights either work or they don't. Probably more likely to do with power delivery.
@roxanneshipley52613 жыл бұрын
Thank you for the video! A few bucks and some time is way better than a $1700 + labor replacement cost (at least that what I was quoted! 😱)
@tarpangadiyali17883 жыл бұрын
Good job. How much price ??
@GurpreetSingh-so7om3 жыл бұрын
There is four srew back at the display as well
@nelsonsuh72633 жыл бұрын
I have same problem. Replaced the display but not working. I think more of motherboard is bad but not sure. I am afraid of buying display cluster cuz if not working or need to reprogram. MB need to recall on this problem. I bet more and more owners gonna have same issue.
@Ana917623 жыл бұрын
Great video! My Metris has the same issue.
@raedareeg13 жыл бұрын
I have a tested solution for this problem,I can sell repair kit if interested,but you have to know a little bit soldering skill,repair solution is fairly easy,and the repair kit is an upgraded modified parts,with better current and voltage ratings. [email protected].
@T-Tailer4 жыл бұрын
Wish they were that nice to me 😢
@donknow50664 жыл бұрын
Still not working after changing New LCD screen.
@akuku44313 жыл бұрын
I know which resistor on the mainboard can cause the problem
@lucianosousa49793 жыл бұрын
@@akuku4431 Could you please, give-me some information about which resistor can cause this? Could you show it? I have the same problem here. I replaced the display just for test, but it did not solve. I did some tests on motherboard but i did'nt found the problem.
@alexanderl.28613 жыл бұрын
@@akuku4431 Can you help ,please ! I changed LCD but still not working , witch resistor on motherboard ?
@donknow50664 жыл бұрын
I had just finished changing mine. Bought from Ali express for USD$99 for LCD. Will update if it works later. Mine is right hand drive for Asia countries. My local only authorized workshop quote me USD$2000=PARTS $200, SOFTWARE TRANSFERING $1800!!!
@donknow50664 жыл бұрын
NOTE 8:25 He mentioned the screen didn't really work for a little while after some time.
@totaltronics87752 жыл бұрын
That's because it's never the screen fault/
@donknow50664 жыл бұрын
NOTE@ 3:50 there are four star screws behind the motherboard, unscrew them will be easier.
@ujd29304 жыл бұрын
awesome , great controllers !!
@ImranKhan-vq8ly4 жыл бұрын
Great video. I have the same issue and wasn't sure how to take lcd out
@donknow50664 жыл бұрын
Is it still working after 6 months? I had the same problem.
@kewinjka4 жыл бұрын
Is it worth to try ? Is here some 1 who done it and its works ?
@ozzie35744 жыл бұрын
didn't work for me, it turned out the same as the old lcd screen.
@informativeworldinfo1444 жыл бұрын
I did the same with my Vito but it didn’t work Problem with mother board
@am39333 жыл бұрын
My one same I bought new screen for my 2016 it didn't work Both my one and new one if I flash with my hand light you can see it is still work But won't light up Any idea please
@vadimfromwashington24834 жыл бұрын
Not accurate, LCD held by 4 T-8 screws located behind back (black) cover. In my case it did not solve anything. I contacted minitools specialist and described my problem before purchasing the screen. Specialist warned me that this will not work, that the problem is not the screen, it is the motherboard. I decided to buy it and try it. Well it is not working, I can see LCD display data if I flash light. No back light on LCD display. Dealer wants $ 1600.00 to replace and reprogram instrument cluster. Not a total waist of time, but in my case it did not solve anything.
@randkprouductions4 жыл бұрын
yeah fair! for me i was lucky and this worked.
@akuku44313 жыл бұрын
One resistor on the maonboard can be burned and cause this problem
@angelsautoglass5922 Жыл бұрын
I should have read this before resistor motherboard it's not the display
@moveas4 жыл бұрын
Great great great...you are awesome...i have same problem in my vito...
@emreas14 жыл бұрын
I change this but its not working its the same
@akuku44313 жыл бұрын
One resistor on the pcb probably needs replacing
@LakshmikanthKishorRabi4 жыл бұрын
Beautifully done flight, radio work and video edits! Bring on more in the future!
@durrellhorst224 жыл бұрын
Good job man. That was super cool to watch !
@dadgarage79664 жыл бұрын
Let's hope 8,000 feet of runway was enough.
@elenabushln4 жыл бұрын
Amazing view !
@insaBordeNation4 жыл бұрын
Love it! Great video. I can hear it now...."Ever tell ya 'bout the time I put 'er down at Pearson International...."? LMAO.
@robertkisin28174 жыл бұрын
Just found out the landing fee for a C-150 is $300. Probably a few dollars more than cost of fuel for the day...
@XalphYT3 жыл бұрын
For a memory like that, it’s worth the price.
@FlexRadioSystems4 жыл бұрын
Well done! It makes me want to get up there and do the same thing!
@OriginalYYZman4 жыл бұрын
This is totally cool.
@arashrezania85334 жыл бұрын
What a story to tell. An awesome way to put YYZ in your logbook!
@AdventuresonTour4 жыл бұрын
So cool.. How many touches and goes could you do on 33 LOL..... sad to see all the planes parked on the ground at YYZ...