Ali Aljwad علي الجواد

Пікірлер

@dions.4246 5 күн бұрын

I got a 2010 ford fusion with same exact issue. Can’t afford a body shop but I believe mechanically skilled enough to put a good band aid on it so to speak 😂. What’s the best way? I was thinking of riveting a piece of metal or even buy a cheap flex welder and then do the rest of the steps you did. Any advice helps. I know this isn’t a permanent solution I just need the car for a couple more months.

@Oracle_Ocelot 16 күн бұрын

Amazing work. I have a 2011 with the same kind of rust. It's nice to know that people out there will take care of it, but see how much skill and effort was involved your repair... I think I'm about to have a new car

@Autobody.repair.with.ALJWAD 15 күн бұрын

@@Oracle_Ocelot thank you very much for your kind words 🙏🏼

@Nepal071 Ай бұрын

Awesome job sir. I got the same problem. Can you help fix it? Where are you located?

@Nepal071 Ай бұрын

Please let me know the location of your shop or some way to contact you.

@Autobody.repair.with.ALJWAD Ай бұрын

@Nepal071 I am located in Peoria Illinois

@Autobody.repair.with.ALJWAD Ай бұрын

It is my pleasure to fix your car if you are around.

@huffel1000 Ай бұрын

Respect. Great Job

@Autobody.repair.with.ALJWAD Ай бұрын

@huffel1000 thank you so much 🙏🏼

@lesliemclean4381 2 ай бұрын

Word Damnskippy an awsome ,rust removal ,body repair and automotive paint job.

@luismanuelbarrerabadillo3131 3 ай бұрын

Hey Ali, what's the name of your shop? I know you're at Peoria Illinois and I would like to take my Ford Fusion 2012 for you to take a look at it

@Autobody.repair.with.ALJWAD 3 ай бұрын

@@luismanuelbarrerabadillo3131 I do work for Maaco peoria. It is the only Maaco in town. Thank you 🙏🏼

@dansignoretti5084 4 ай бұрын

amazing work!!

@Autobody.repair.with.ALJWAD 4 ай бұрын

Thank you for supporting the channel 🙏🏼

@Givelasagna 4 ай бұрын

Where are you based out of?

@roberthorseman7432 5 ай бұрын

What type of cutter is being used for the plug welds.

@Autobody.repair.with.ALJWAD 3 ай бұрын

Thank you for commenting and sorry for the late answer, the holes of the plug welds are 8mm.

@Autobody.repair.with.ALJWAD 3 ай бұрын

I meant 8mm drill bit

@roberthorseman7432 3 ай бұрын

@@Autobody.repair.with.ALJWAD Okay thankyou for getting back always wondered what the best size would be👍.

@shanenice5380 5 ай бұрын

How much rapiar inner rockets

@ransomeee 8 ай бұрын

I wonder how much that would cost you to get done

@Autobody.repair.with.ALJWAD 8 ай бұрын

I got about 30 hours to do both sides. I wish i could tell you exactly how much, but I work in the shop, and the office does all the deals with the customer. Thank you for supporting the channel 🙏

@kevinhall5311 11 ай бұрын

Very Impressive work! Great Job! I need this done, where are you located lol!

@Autobody.repair.with.ALJWAD 11 ай бұрын

Thank you for your kind words, Sir. We are located at peoria, IL

@fzpb61 Жыл бұрын

How much would it cost to do this job? I have one with the same issues but it would probably cost more then what the car is worth! Outstanding workmanship!

@Autobody.repair.with.ALJWAD Жыл бұрын

I realy don't know exactly how much the owner of our shop did charge the customer. All what I knew that it was very sentimental for the owner of the car to fix it regardless the cost,thank you for your great support to my channel. 🙏🙏

@fishhuntadventure 6 ай бұрын

At a meager $65/hr x 17hrs = $1105, plus (modestly) $200 in paints, $50 supplies, $75 materials = $325 x 25% for overhead = $406.25 @ $1511.25 + tax

@awesomefish100 Жыл бұрын

Where did you get the replacement rocker panels? I also have a fusion and will be doing this eventually.

@Autobody.repair.with.ALJWAD Жыл бұрын

LKQ is a part company,I think my boss got it from them. Check any auto parts manufacturer.good luck 🙏🏼🙏🏼

@jonboy_13 Жыл бұрын

How much does a repair like this usually cost?

@Autobody.repair.with.ALJWAD Жыл бұрын

It depends on the shop's labor rate for body work and paint. I work in this shop as a body tech and I don't write the estimate so I am not sure what we charged the customer.thank you for supporting the channel.

@gigacarcalet5657 Жыл бұрын

What this guy does is art of auto repairing . not many people can do this job today !

@Autobody.repair.with.ALJWAD Жыл бұрын

Thank you so much for your kind words.

@jc2478 9 ай бұрын

Ive got a charger with this same issue. I'm willing to pay to fix it right becuase i love the car. Where you located

@Autobody.repair.with.ALJWAD 8 ай бұрын

@jc2478 I am located in peoria Illinois. I will be more than happy to fix your car 🙏🙏

@fernandosalas8589 Жыл бұрын

Excellent job

@Autobody.repair.with.ALJWAD Жыл бұрын

Thank you for supporting the channel. 🙏🏼

@shutting1978 7 ай бұрын

It's a really great job. Just a question: What is the average cost for this maintenance?

@louisvanrijn3964 Жыл бұрын

Well done Ali, you are a gifted sheet metal worker ! (Fixing the sxxt of Ford)

@Autobody.repair.with.ALJWAD Жыл бұрын

Thank you so much for your support 🙏🏼🙏🏼

@powerman6242 Жыл бұрын

Good Jop. Perfekt,

@Autobody.repair.with.ALJWAD Жыл бұрын

Thank you for supporting the channel 🙏🏼🙏🏼

@gregorizi Жыл бұрын

One hole, little rust, couple of years without noticing and that happens.

@إحساننورالدينمحمودخصاونه Жыл бұрын

عمل متقن❤❤❤❤❤

@Autobody.repair.with.ALJWAD Жыл бұрын

بارك الله بك وشكرا لدعمك القناة وعيدكم مبارك وكل عام وانت بخير. 🙏🏼🙏🏼

@Belgianmalinoisk9-p9f Жыл бұрын

Price?

@Autobody.repair.with.ALJWAD Жыл бұрын

Not sure exactly how much our shop charged the customer.

@jimcarroll7829 Жыл бұрын

Nice job!!!!

@Autobody.repair.with.ALJWAD Жыл бұрын

Thank you for supporting the channel 🙏🏼🙏🏼

@mercedesvan-doors34 Жыл бұрын

Nicely done. I'm about to start similar work on my old Jaguar, both ends of both outer sills rotted out.

@Autobody.repair.with.ALJWAD Жыл бұрын

Good luck with your next project and thank you for supporting the channel 🙏🏼🙏🏼

@jimmywells33 Жыл бұрын

All that work for a disposable POS Fusion lol!

@Autobody.repair.with.ALJWAD Жыл бұрын

Yeah but it's still a customer car man.

@ErickWright 9 ай бұрын

280,000, miles on mine and it's still running strong but it does have rust in that exact same spot. Never left me stranded or on the side of the road

@2Jeezuzisreal Жыл бұрын

On my Chevy van big rust on lower under doors rocker panels I got some ABS black plastic 6 in and ran it through a table saw cut it in half. Two pieces the length from tire to tire. Drilled out resessed holes in top and Screwed in self tappers.. Black Caulk the top. Underneath I bent 5 bolts connected to anything. It's ugly Rusty mess but it worked and it will never rust there again. Oh I forgot I used old engine oil in a spray bottle mixed with some paint thinner and sprayed all the underneath before I started. For other projects, If you want free metal just find a commercial metal shop dumpster. If you get lucky you'll find the primed and painted with the plastic film overlay.

@Autobody.repair.with.ALJWAD Жыл бұрын

Thank you for your comment and your support to my channel 🙏🏼🙏🏼

@DominikWr Жыл бұрын

what about the place for the lift?

@Autobody.repair.with.ALJWAD Жыл бұрын

It is supported by a thicker gauge plate to lift the car safely.

@TDCflyer Жыл бұрын

what about rust protection on the inside of that freshly repaired patch? in just 2 to 3 years time it'll be worse than before...🤮

@Autobody.repair.with.ALJWAD Жыл бұрын

I applied primer all over the inside panel and added cavity wax through the drain holes using a 360 degree nozzle to make sure that the cavity wax(corrosion protection material)cover the entire inside panel.🙂

@krzysiekb9045 Жыл бұрын

Wow. I like your work.

@Autobody.repair.with.ALJWAD Жыл бұрын

Thank you for supporting the channel 🙏🏼🙏🏼

@jorgetellez7969 Жыл бұрын

fto have done it in under 10 minutes im impressed lolol.. jk.. all jokes aside. great job. having to fabrication your own panel is a pain in the butt.

@Autobody.repair.with.ALJWAD Жыл бұрын

Thank you so much for your kind words. Thank you for supporting the channel 🙏🏼🙏🏼

@dookieday1 Жыл бұрын

Very good work ......

@Autobody.repair.with.ALJWAD Жыл бұрын

Thank you so much 🙏🏼🙏🏼

@bunabuna9287 Жыл бұрын

Brilliant work 👏 looks amazing

@Autobody.repair.with.ALJWAD Жыл бұрын

Thank you for supporting the channel 🙏🏼🙏🏼

@sudarmaji2645 Жыл бұрын

🔥🔥🔥🔥🔥🔥l 😎😎😀😎😎😀

@sudarmaji2645 Жыл бұрын

👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

@Autobody.repair.with.ALJWAD Жыл бұрын

Thank you so much 🙏🏼🙏🏼

@kennethtalbott2233 Жыл бұрын

quality job.

@Autobody.repair.with.ALJWAD Жыл бұрын

Thank you so much 🙏🏼🙏🏼

@huzurgelecek Жыл бұрын

In Europe they will charge you $1000 at least for that job, and give you bare metal without plaster and paint finish.

@Autobody.repair.with.ALJWAD Жыл бұрын

Thank you for supporting the channel 🙏🏼🙏🏼

@АбищкеЯкубова Жыл бұрын

Хорошая работа, молодец

@drazenpapiga1496 Жыл бұрын

Ja uvijek prije punila stavlja Epoxy primer 2k, nakon toga punilo, ili pasta za lemljenje i kositar pa sve ostalo kako vec ide...

@TheGhost-gx5vd Жыл бұрын

Well i am gobsmacked i thought that cars didn't rot these days how wrong was i my vauxhall combo is a 55 plate and still solid under neath

@jorgemairena2289 Жыл бұрын

Con todos los materiales y herramientas. Y la buena voluntad para hacerlo. "Felicidades"

@mikeberry304 Жыл бұрын

Great job carried out there, well done 👏 ✔️

@Autobody.repair.with.ALJWAD Жыл бұрын

Thank you Sir for your support 🙏🏼🙏🏼

@neidefiguiredo9763 Жыл бұрын

... The service remained very good colleague ! A strong embrace and excellent thursday !

@Autobody.repair.with.ALJWAD Жыл бұрын

Thank you so much for supporting the channel🙏🏼🙏🏼

@johnswinkels2979 Жыл бұрын

Drill a drainhole in the inner section if possible spotweld lowwerside if not then drill 8mm holes before you put it on the car and if done correct welding you don't need to put fiberglass on the panel and wax the inside after painting

@Autobody.repair.with.ALJWAD Жыл бұрын

I made sure to drill a drain hole, the welds done correctly but I plug welded because there is no spot weld machine in the shop also, I sprayed cavity wax inside the panel using a 360° spray tip.the reason I put fiber glass is because the panel I received was defective so I had to re-fabricate the panel and that caused deep dings and hammer prints.i couldn't show every step of the repair process because of the length of the video(17 hours). I had to remove some important content to make the video less then 10 minutes.also,the low quality of the camera of my phone played a bad role too. Thank you so much for sharing your experience and i am always grateful to read any valuable information that makes the job better.thank you for supporting the channel. 🙏🏼🙏🏼🙏🏼

@ronaldhamblin4615 Жыл бұрын

Yes apart from the drain hols a first class job fabricating that sill end result looks brand new 😊all the best to you

@Autobody.repair.with.ALJWAD Жыл бұрын

Thank you for your support 🙏🏼🙏🏼

@Autobody.repair.with.ALJWAD Жыл бұрын

Thank you for your encouragement 🙏🏼🙏🏼

@paulrubery1042 Жыл бұрын

Nice job mate 👍🇬🇧

@Autobody.repair.with.ALJWAD Жыл бұрын

Thank you for supporting the channel 🙏🏼🙏🏼

@andreasolah454 Жыл бұрын

Ford Company . Made in Germany ... german precision and quality....never ever !!!

@A_Stereotypical_Heretic Жыл бұрын

Not bad my guy. Not bad at all. A little discrepancy in the jamb on the right side but much better than I and most can do! Especially using sheet metal instead of prefabbed parts! Good work brother

@Autobody.repair.with.ALJWAD Жыл бұрын

Thank you so much for commenting and supporting the channel. The process was about 17 hours of work. I tried my best to choose the important part of each episode and make it under 9 minutes video. I misplaced the last two episodes and that caused some discrepancy. Since it was my first video, I will do better job as far as uploading the videos to have better idea of the repair process and not create any confusion. Thank you again Brother.🙏🏼🙏🏼

@screwsnutsandbolts Жыл бұрын

Excellent job ! 👍

@Autobody.repair.with.ALJWAD Жыл бұрын

Thank you for supporting the channel 🙏🏼

@barinovalexey1115 Жыл бұрын

Главное шпакли побольше

@Autobody.repair.with.ALJWAD Жыл бұрын

Thank you for supporting the channel 🙏🏼

Ең жақсы KZbin

Пікірлер