What bumper is that? I hope you still see this even though this is a 6 year old video.... I think I'm going to do that mod to mine it looks like you cut the corners off your body so the bumper would protect the whole front while giving you a better approach angle good stuff.

Can it run on lipo battery

7321 Joelle Park

Hi there 👋 I am late to the party, but i just start in this hobby with my first crawler. I have think aboutbto go for longer shock - in my case from 80 to 90 mm, with lighter spring for 80mm shock and 40 rated oil. I want long travel and lower stand. What you think about that, will it work?

to all that have had a belt disintegrate- make sure you get all the 'shrapnel' out of the cooling duct!.. and make sure the intake box isn't full of weed seeds/mouse nest. A plugged duct will cause the new belt to run really hot.. and you'll be doing this procedure again... SOON!

One way to shorten your vids would be to stop grunting and groaning n sniffling!

Does one nickel just not cut it

In 2024 What would be some of the best tire choices for grip, especially smooth surfaces like rocks? Any really soft, sticky compounds that stand out? Im looking for an average size, not a larger tire. I'm new to crawling and i'm trying to get the best tire on the first try without having to switch to something else later.

Cheers bro from new Zealand hope my one goes well in the morning don't want to wake my nabour up

my trx-6 overheats now that I have the vxl-3s and a 2s2p battery.... Not sure why. Would like to know why.

How long can i use the batteri til it dies on 1 full charge

Great video guys!

Who asks for kmh

Bro best video on KZbin. You were specific on everything you did. I wanted to do same thing but was nervous but now I will do it. Ty

I recently came up on a erevo 1/10 scale for little under 500 shipped. A I. Google. Says it's not recommended to put two. Lipos in it. Is this true?

What size and gauge rectangular tubing did you use?

Dont flatter yourself! You look shady and sketchy without the glasses too. Thats what I/we like about you! Good video

PPE

audio is so bad i am unable to hear what is being said unless i turn volume up full .

This was absurdly ridiculous. AND Hilarious! Had me smiling with how ridiculous it was. Agreed. I get that on my videos too. It's like people don't think we're able to do our thing. Keep on doin you. And I'll keep doin me. 👍

What intake and carb?

will these upgrades fit on the 1/16 revo?

What body are you running?

Where did you get the trailer tongue from? Ours is bent and we need to replace it. THank you!

I recommend getting the aluminum hub nuts for the trax so it can take hi-speed without melting and falling apart

Is this on One 3S Lipo or dual 3S Lipo in series?

This was with the completely stock pinion gear? Not the 50+ one?

This is why I stopped loaning my trailer out to anyone I don't fully trust.

I always assumed droop referred to the down travel, basically the opposite of what droop actually means in the crawling world. thx for the vid, I am experimenting with a no-spring setup so the compressed shocks have zero force and the un-loaded shocks have "full droop" but apparently that would be considered "reverse-droop" because they are drooping due to gravity instead of being pushed down via spring. Reverse sociology is the way.

Where are you guys located??? You seem really familiar!!!

how much is a new tongue

how'd u get the ball hitch off. is it welded?

Did you have to assign a channel first?

love my UDR!

Is this the same lighting kit for the truck ? Chevy cheyenne

Thanks for the video! I'm saving for this same servo + mount & horn after my $15 emaxx went out not too long after a lot of upgrades and added weight.. and I especially appreciate the tip about grinding down the top 2 mounting positions--I knew exactly where you were going with that since mine liked to do the same thing and get caught up on the frame rails (and bumper extensions).

I've been getting into these smaller crawlers and starting to upgrade a few of the ones that I have. Good video 👍

Thanks for the video! I'm going to install a Reefs 99 in my Deadbolt. I see it now. Thanks again.

thanks bro, just enough to get me started

I run my mini e revo with 3s relentlessly and jump it none stop. After its been upgraded it takes everthing.

Pinion and spur ?

I know this video is old, how did it hold up?

Does it come with the Battery? What kind of charger do i need?

While you can differentiate between batteries. You don't know what voltages you are running. You also appear to be quite an amateur driver and have zero technical knowledge. Good luck.

The dreaded track skip

I’ve got a single 2s 1500 mah Lipo only getting around 5 min on brushless. Is this normal battery life for this thing or are my batteries just bad?

hey bro so i also have the c10 how would you do this now? is there a different servo that fits better, or are there new servo trays i can get?

Which 3s battery is it

Of course she's faster on NiMH, ur talking 14.4v vs 2s lipo at 7.4, good nickel metal cells will be even faster than a 3s lipo fresh off the charger as they are only 12.4v(full charge) good NiMH packs at 12 cells will show 16v off the charger, they won't hold that long under load but it will be faster for a min or 2 over 3s lipo! Now what will really break the sound barrier is a pair of 2s lipos in series for 4s at 16.8v, drop the pinion 2 teeth so you don't smoke the 3sc and she'll run 60mph!

This is not a clutch it is the automatic transmission (Continuously variable transmission) clutch itself, an oil clutch is inside the engine case.