Bro, i swear i just saw you and chatted with you for a minute when you were buying the parts for this!!! Auto Zone off the Ave?
@demarcushudson6143Күн бұрын
@alechaynes3993 what city?
@freddyd770165 күн бұрын
Hey I was wondering if you had any info on how to change the lower ball joints on a 2011 Jaguar xjl without changing the hole knuckle
@klmbaby68 күн бұрын
Good job bro...those Acura RL's are rare cars to see on the road nowadays. I used to have a '93 Acura Legend. One of the best cars I ever owned!
@samburd724013 күн бұрын
Much appreciated, I would have been mad after I drained the ac to find that 10mm holding the block😂
@WoodworkingforAnyone14 күн бұрын
Not only did you do a great job, you put considerable effort into making a good quality video to teach others. We can keep these excellent cars on the road and helping people get around. Thats a lot of work and you did it well. You should walk a little taller :)
@WoodworkingforAnyone14 күн бұрын
There are certain jobs where you get the quote from the shop and say "yeah that aounds about right" :/ :)
@wuerfelfmx91621 күн бұрын
Thank you so much for your video man! I was getting so frustrated and worried about having to evacuate ac line! have a happy thanksgiving!!! thankful for this!!!
@noahstangАй бұрын
Hey can you go straight to stage 3? Or would I have to go thru stage 1, then 2, then to 3?
@demarcushudson6143Ай бұрын
@noahstang there are some things they recommend upgrading first before you go to stage three. Like the cold air intake, the ribbon deleted, amongst other things.
@noahstangАй бұрын
@ ah okay, good to know. All I wanted was exhaust + tune but I’ll look into the other things as well, thanks man!
@mitchellcox1912Ай бұрын
Thanks for sharing this video.
@hotrodgtxАй бұрын
Thank you sir
@angelespinosa21592 ай бұрын
Thanks! Saved me a lot of time!!
@clos99022 ай бұрын
Good video I couldn’t find anything anywhere else
@2Adanny75752 ай бұрын
Just remember to lock tight it when going back in very easy to back out and loose but trip to hardware store will solve issue
@neilfoe91452 ай бұрын
This a very well made video,you did a great job
@stevespeed20002 ай бұрын
Wont pulling the compressor off this way, make it extremely hard to remove the compressor? Did you have to move the steering rack to get the compressor out?
@demarcushudson61432 ай бұрын
@stevespeed2000 Did not have to remove the rack. I removed it exactly the way I demonstrated it. Simple.
@stevespeed20002 ай бұрын
@@demarcushudson6143 awesome thanks for the reply!
@HUS5A1N2 ай бұрын
Great video! 🚗 🔧
@markczech93723 ай бұрын
Great info! I struggled with these for an hour before I found you video. Was literally done in 5 minutes. My hat's off to you! Thank you.
@DavidGutierrez-zi4dy3 ай бұрын
GREAT!!
@Minii_Cey3 ай бұрын
YES THIS HELPED A TON!!
@annaguido71243 ай бұрын
Did you have to change the back ones as well? if so, do you have a video?
@demarcushudson61433 ай бұрын
@@annaguido7124 I didn't.
@michaelp57653 ай бұрын
Thank you for this video. I am about to take my radiator out
@Hassan-hx8bc3 ай бұрын
Have a 2015 Kia soul just changed the belt today it’s squeeling like crazy.
@demarcushudson61433 ай бұрын
@Hassan-hx8bc does it squeal without the AC on?
@Hassan-hx8bc3 ай бұрын
@@demarcushudson6143 haven’t tried yet but I know my ac is low.
@JayCeeMax4 ай бұрын
The Samurais were jot flipping. It was just a weasley Consumer Reports reviewer who was trying to force it to flip many times and finally got it to and falsely said they were easy to flip which wasn't true. It didn't flip any more than any regular SUV.
@smitherzz0014 ай бұрын
Update so looks like I found the little dongle, but my other question is how much was the license for the tune?
I have been looking to tune my Sea-Doo spark 18 and I purchased something called reliable Tuning. Not sure if you heard of it but this looks a lot better. Honestly, what are the gains and can you please provide a link to this exact product? Looks like it’s a bit more expensive than reliable Tuning.
@smitherzz001 I got mine from green hulk. I sent the link. To me, this is better than the one u mentioned because you can read and delete trouble codes with the device.
@demarcushudson61434 ай бұрын
@smitherzz001 I don't know what the actual gains are, but I can honestly say that the tune tured my skis into a different animal! I love them! I did the 8600 tune, and from I heard, it boosts the hosre power to upwards of 110hp, and it really feels like that could be true.
@Kvamvold3 ай бұрын
@@demarcushudson6143Wow! cool. I have the maptuner nano and the maptuner X. Im planing to do this tune also. But do you need the solas impeller? or does it works fine without the solas impeller? 😅
@Kvamvold3 ай бұрын
btw! if you did not know, you cant reset the history on the manptuner nano. You can donuts with the maptuner X, but you need a home service license for that. Or just the reset service app.
@smitherzz0014 ай бұрын
Btw you helped me tremendously thank you !!!
@smitherzz0014 ай бұрын
How did you add vts
@demarcushudson61434 ай бұрын
@@smitherzz001 Check out my video on adding the vts. It can only be done on a ski that has the brake and reverse.
@smitherzz0014 ай бұрын
Oh, OK. I don’t have that on my ski unfortunately thank you! Though
@daneast4 ай бұрын
Bought a used Fusion, and found coolant was disappearing. Discovered it was leaking around this sensor (dripped every second or so when running). The sensor looked new, and I don't think it was installed quite right. There was play and I could move the sensor side to side some, and when I did a stream of coolant would run out. I removed the clip and the sensor, took the o-ring off and cleaned it (I was going to replace the o-ring but none in my o-ring set were the right thickness and diameter). Replaced the sensor using the original o-ring (rotating it good to really seat that o-ring), put the clip back, and now the sensor is tight and I can't wiggle it. No more leak, at least for now. Anyway, if you have a slow coolant leak, check around this sensor. When it drips on the engine it appears it is being boiled off, so no pooling happens under the car.
@memphizballa14 ай бұрын
The team question is, why wasn't that other plug working. Did you figure that out?
@kfrank2643 ай бұрын
I’m here with it too
@ericdixon66964 ай бұрын
Where are you located
@demarcushudson61434 ай бұрын
@@ericdixon6696 Desoto, Texas
@malibuhandymanservices15764 ай бұрын
Bro you just saved me some money
@efreutel5 ай бұрын
Great advice. Much appreciated Thank you!
@wetheplugclothing5 ай бұрын
Thanks Ill get back to you if this solves my issue in a few days.
@joshlipps19545 ай бұрын
Thank you! I bought extractor pins and couldn't get them to work. Your method was quick and easy. I appreciate the video
@HUNTNFISHNVA5 ай бұрын
Just wanted to tell you how I installed the seals on the evaporator tubes behind the expansion valve. If you take a short 1/4” socket extension you can slide the seal over it and it will fit perfectly into the High pressure line going into the evaporator. This will allow you to work the seal on the tube without dropping it into the evaporator housing. You can use a 3/8” extension for the low pressure line. Just leave it installed until you get the seal on the stub tubing. If it falls the extension will capture it and you can continue to work it on. Hope this helps!
@punisher27045 ай бұрын
You have a 2014, it should have day time running lights so it should be plug and play with these headlights.
@DAskew5 ай бұрын
I have an 02 Tahoe no Bose system that has 2 amps subs playing but internal speakers are not actually some time they play but they stop
@oscarcee68315 ай бұрын
Do you know the part number for expansion valve?
@huntercarley87176 ай бұрын
Liked the video but the music made it hard to hear you
@anakarenaguilar60696 ай бұрын
Thanks this video help me it took me about 2 minutes to get it out
@ffahs41466 ай бұрын
Thank you. Do you know if I can use one of the top mounted panels, by rewiring to top of smoker?
@demarcushudson61436 ай бұрын
I'm not 100 percent sure, but I think the wiring configuration is the same.
@kylequintana6 ай бұрын
Omg you saved me a lot of time and money…got one off marketplace and didn’t think to lookup the part before I got it and thank god there is something to replace it!! Thank you
@merc-loavant57186 ай бұрын
Where is the linkage at the bottom of 2016 kia Sorento??
@demarcushudson61436 ай бұрын
Are you referring to the transmission linkage for the gear shifter?
@merc-loavant57186 ай бұрын
Yesssssssssssssss I'm having a hard time finding it my Kia starts and going in all the gears but it want accelerate so I was tryna to see did the linkage come of from the bottom
@ffahs41466 ай бұрын
I can not locate that Wi-Fi control panel. Do you know where i could find. Or can I retro and bypass it and fit a controller that sit on top of smoker.
@demarcushudson61436 ай бұрын
The last guy said he found one on Facebook marketplace.
@keithmahler42366 ай бұрын
I got a 2019 fusion 2.5 changed the temp sensor reset the check engine light was doing fine for last 3 weeks now it's back on but not overheating or anything Has ran fine the whole time even before I changed it out just temp sensor and check engine on light temps right in the middle on temp any suggestions thanks
@demarcushudson61436 ай бұрын
Could be a bad sensor or a wiring issue. Whenever possible use oem parts they tent to work better.
@keithmahler42366 ай бұрын
@@demarcushudson6143 I changed the sensor like I said think it could be the clip Motorcraft Electrical Wire Connector WPT-985
@edgarmiguelprada6 ай бұрын
Jajajaja, lo único que vi fue la cara del señor. Aprenda primero a ubicar la cámara.....gracias en todo caso
@angelespinosa21592 ай бұрын
Eres bruto o no entiendes ingles entonces, te explico todo lo que tienes que hacer y la ubicacion 😂… Mas claro no podia estar el video.
@borisjelzin-e6d7 ай бұрын
Thanks for sharing :-)
@tellosrt87 ай бұрын
Saving lives with this video!
@tremonti21377 ай бұрын
Are the struts the same for the XJ and XJL?
@demarcushudson61437 ай бұрын
Not sure.
@cordaijennings64197 ай бұрын
Great video thanks bro if you guys are having no sound you need to run a small jumper wire from the pink wire to your blue remote wires this worked for me I was having power with no sound now all my speakers are working & subs