For a while there I thought this guitar was going to get a massage.
@vedecky007 Жыл бұрын
You don't have to cut the plastic bags, just tear the perforated side:-) You are welcome!
@DanielBobke Жыл бұрын
You should break off the end of the retainer piece. This is noted in the assembly instructions from Neutrik.
@_MrIgor_ Жыл бұрын
in order for the plug to screw in all the way, I break off a piece of plastic on the retainer. it fixes cables less than 5 mm, and when it is broken, it fixes up to 7 mm.
@hamdog8872 Жыл бұрын
Awesome video. Played along as I watched. Dig the time lapse
@SuperTechnomancer Жыл бұрын
you forgot to make a part 2
@deandee8082 Жыл бұрын
where did you get the cable?
@twelthstring Жыл бұрын
Any idea why in my Planet Waves guitar cable the white wire is schortcutted with the the shielding wire? I shortcutted the red and white wire like in this video and mounted new Neutrik plugs. Result: weak sound. Resistance measured from plug to plug is 1.2 and 1.6 Ohm.
@antediluvian314152 жыл бұрын
Niceliy done! What is the bit you are using?
@_dnk2 жыл бұрын
part 2????
@les71182 жыл бұрын
tell please. i wanna buy same connectors. is plug has backflash inside of black housing of finished cable?
@Mi-cha-el-Edward-Lee2 жыл бұрын
Thankyou for sharing this.
@oliphant37273 жыл бұрын
I followed your directions to replace the plug, but now my highs are attenuated. I used a good cable to test and it sounded fine.
@killaken20002 жыл бұрын
the black sheath around the hot wire is conductive so strip it back farther.
@cristianrachitan6039 Жыл бұрын
Because you followed a crap video ..... He makes a guitar cable out of a microphone cable I would connect the white to the ground so that you have kind of a phantom ground .I would not increase the core size of the hot wire... it only creates more capacitance therefore you lose the high-end.
@pandoypenduko43283 жыл бұрын
Thanks man! This is helpful.
@MarcoxNew3 жыл бұрын
Ciao, non ho capito come calcolare la giusta altezza della corda nel capotasto. Schiacciando la corda nel terzo tasto la corda deve essere a contatto con il primo fret o deve esserci un po' di spazio tra corda e fret? Bei video.
@stratsteveo1063 жыл бұрын
How do I raise the action?
@orionbekesi3 жыл бұрын
still waiting for part 2
@arturoacosta5203 жыл бұрын
can you share de file to make the test. Please, i really preciatte
@ernestoalvarez90453 жыл бұрын
Why not use unbalanced instrument cable, as opposed to using balanced as you do in your video?
@cristianrachitan6039 Жыл бұрын
Because he wants to create a bad sounding cable:))
@TheBoomtown43 жыл бұрын
How hot is your iron? I do the same process and when I press the tinned tip to the tinned shielding into the puddle on the jack, it only melts the tinned shielding, heat won’t transfer to the puddle in the jack.
@Elniniss Жыл бұрын
You’re supposed to heat up the puddle first.
@johnqpublic27183 жыл бұрын
The frets on my very first actual Fender Stratocaster, made in 1991, look just like this. I have pretty damn fine hand-tool skills, but this vido convinced me that i need to re-fret my baby. I'm going to do it myself.
@0Imtheslime03 жыл бұрын
Awful fret puller haha..
@RavenMadd93 жыл бұрын
can you tell me what size wood screws used for mounting single coil pickups?.....thanks I am putting mine back together
@loganstrait75034 жыл бұрын
Weird hard hard it is to find info on this rig. Took me hours just to find out "do you put the string bolts on before or after you lock the bridge to the body?"
@DanielBobke4 жыл бұрын
I am going to be buying a new HM Strat in the next few days. Any recommendations on a custom setup (action, etc.)?
@joycesanders48983 жыл бұрын
...sure,..set up accordingly to the way you play...
@stratsteveo1063 жыл бұрын
@@joycesanders4898 lol. Nice
@kaybhee64 жыл бұрын
try also furutech spkr wires
@idealmethod4 жыл бұрын
Just completed first refret - when taking off frets ensure fret board is wet, use wet cloth, once all wet and scalpled its a clean pull. USE WATER this avoids splitting wood.. thx for video.
@MrSongwriter22 жыл бұрын
I use heat and a small amount of water either side of the fret only. Too much water is a bad thing
@idealmethod2 жыл бұрын
@@MrSongwriter2 100 percent right
@scoots85194 жыл бұрын
Man dem frets have been used, someone played the shit out of that Strat.
@loneliboy12344 жыл бұрын
Hey man great work. What glue you are using for the frets? And what extra work you should do when refreting a guitar with bindin? Thanks
@johnpaniccia38024 жыл бұрын
Hi....would you happen to have the CNC file for a 50s tele body? If so, how can i purchase it?
@iblesbosuok4 жыл бұрын
What about amphenol?
@Gundam18544 жыл бұрын
Whats the name of songs?
@Gundam18544 жыл бұрын
Nice guitar
@claudioconilsole4 жыл бұрын
bravissimo ........
@Wizardofgosz4 жыл бұрын
Why are you using mic wire for your guitar? Why not just use something really nice like Canare GS6 or Mogami 2524?
@xavierbrunotte93924 жыл бұрын
Can you share the file you used/
@GVRguitars4 жыл бұрын
Hi, mate the files are available for sale at my website
Are the string ferrel holes and 4 bridge plate mounting screw holes drilled using the CNC process as well? I ask because the Indonesian Squiers are not!
@ilcutrese19774 жыл бұрын
Hi, your videos have been very helpful for me I wanted to ask you the little vial what you use what is that material. Which sandpaper did you use thanks?
@GVRguitars4 жыл бұрын
Hi, at first I use a 1000 grit sandpaper, then I switched to 1500 grit and after that to 2000 grit to get a nice finish on the fretboard.
@ilcutrese19774 жыл бұрын
@@GVRguitars OK. do I have to glue the frets?
@GVRguitars4 жыл бұрын
@@ilcutrese1977 yes I recommend you to glue them
@ilcutrese19774 жыл бұрын
@@GVRguitars can i use wood glue?
@juanluisnavarromira47124 жыл бұрын
@@GVRguitars 544f5ed33f4eg4ew42d te 4 4to 4 de r4 re eso 4 te e
@claudioconilsole4 жыл бұрын
super super job
@oscarwright19254 жыл бұрын
I am building a guitar and I cant find any models for a stratocaster neck anywhere! could you please send me the files for this?
@GVRguitars4 жыл бұрын
Yes, tell me what neck specs would you like
@dannychristie56285 жыл бұрын
please read the manual on the connectors.
@GVRguitars5 жыл бұрын
Sure, I'll do it as soon as possible
@dannychristie56285 жыл бұрын
Then you will know to break off the part of the insert, for the diameter of cable you're using. I have done the same thing. Just trying to help.
@GVRguitars5 жыл бұрын
@@dannychristie5628 I knew that but I've done it this way because I was thinking of changing cable in the future with a smaller one
@dannychristie56285 жыл бұрын
@@GVRguitars I would recommend Canare or Mogami if you can afford it. Van Damme is also good.
@jm170345 жыл бұрын
Before this video I didn't know what to do with 2 wires (red and white). Thank you so much!
@GVRguitars5 жыл бұрын
Glad to help mate
@randoshus37625 жыл бұрын
Dang did someone lay that guitar upside down and stomp the neck? By the way glad to see you took them out sideways! Good job!
@adnanmahmud4915 жыл бұрын
Hi there, Can you please share the CNC file?
@markstockford91095 жыл бұрын
How many times can a guitars fingerboard be re-fretted before you need to get a new neck?
@randoshus37625 жыл бұрын
As many as you want I reckon...If the wood chips....you might replace the neck...
@AllThingsMech3 жыл бұрын
If you're careful when pulling the old frets out and don't chip up the fingerboard too badly, you can get away with several refrets before the slots get sloppy. Even if you chip them up, as long as the damage isn't too severe some sawdust from the existing fretboard mixed with a little superglue makes a very convincing chip filler, especially on darker wood (rosewood, mahogany, etc).
thanks man i thought i bought the wrong shit when i checked my cable <3
@GVRguitars5 жыл бұрын
Glad to help you
@angrytroll275 жыл бұрын
Thanks mate after soldering it back together I didnt realize that the metal sleeve goes on last. DOH
@hugodx10005 жыл бұрын
Name of the 2nd song? Nice video
@MrSongwriter25 жыл бұрын
If you heated the frets with a soldering iron you would have had far less chip out and saved time gluing chips or superglue and rosewood dust to fill them. Rosewood is bad for chipping as can be seen here.
@GVRguitars5 жыл бұрын
Yes, that's an option too
@dd611252 жыл бұрын
rosewood is extremely flammable. if you put a soldering on on the frets you risk lighting the fretboard and burning down your house or apartment.
@MrSongwriter22 жыл бұрын
@@dd61125 absolute nonsense. You are adding heat to the fret for around 10 seconds not the wood. Not using a blow torch
@nedalhubhub18512 жыл бұрын
i thought the heat would expand the metal in the wood and make the removal harder?
@MrSongwriter22 жыл бұрын
@@nedalhubhub1851 nope as it breaks down any glue in the slot and does reduce the chipout. In fairness you are heating the fret enough to melt glue only and by the time you have taken the soldering iron off, put it in its stand, got the chip protector in place and start with the fret pliers, it’s already cooling
@DIALFMMHz5 жыл бұрын
hola amigo ese tipo de conexión donde las comprar
@GVRguitars5 жыл бұрын
Hola, Todo es on internet. eBay, Amazon etc
@DIALFMMHz5 жыл бұрын
@@GVRguitars gracias me podrias pasar el enlace de esas conexiones gracias de nuevo
@GVRguitars5 жыл бұрын
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.it%2Fulk%2Fitm%2F162915301804 Try this one