@@LePineconeMan sorry, don't have any. If you want to build it, try search some posts below, where you can find link to original creator and than you can buy building instructions.

@@kladovec k, thanks :)

Sorry, but you saw probably website of the original creator. I'm not him, so ... can't help you with discount.

@@kladovec So do you know the creator of that website?

​@@khanhtuan7449Nope, just like others I buy instruction and thats all.

Hello, several post lower you can find link. This is not my own creation. I'm also buy instruction and build it.

Hi, I think I can make some samples from PDF.

​@@kladovecI have buy the building instructions, but i think there is missing file "BA bagger 288 komplett". There are only 11 files, but in the partlist folder are 12 files

@@StefanTenev-zp7j Yes, I have also 11 files. It is clearly vissible in BI where to connect other parts/blocks, it´s always marked with different colors. And when you know how final bagger should look like, it can be builded. 12 files are for "Stuckliste" - partlist. My version is partly modified, I´m using Sbriks and external power source, so some modifiations were made. But completing together was the same.

​@@kladovecWhat kind of parts are you using for building the bagger? Original Lego Technic parts or Chinese replica technic parts.

@@StefanTenev-zp7j Original LEGO parts only, buy from Bricklink.com. Only Sbricks and custom wiring are not LEGO, and of course strings are from Aliexpress.

Hi there, only two ropes are there. Both for raising and lowering front boom with bucket wheel. Both run from rear drums, go up to the upper pulleys to the front row of pulleys located in the front upper arm. Than go back to the main arm. 5x time ropes go to the front and back for each rope. Rope is tied up in the front upper arm. It is clearly vissible in the time 3:18. Hope this will help.

¿Quiere decir que cinco veces tengo que empezar con una cuerda desde la parte de atrás, pasar por el medio hasta la parte delantera, y luego colgar la cuerda por el medio? y terminar en la parte delantera. ¡Creo que su consejo realmente ha sido de gran ayuda! Muchísimas gracias

@@주종선-q5f Correct.

¡Muchas gracias!

Over 17500 parts.

Hello, yes all Lego. Only four Sbricks for controlling through bluetooth and string from aliexpress. At this time there is also custom wiring, it is powered from external power source.

@@kladovec Do you have a detailed parts quantity list? I really want to build them but I don't know what they need

@@khanhtuan7449 This bagger is not my own creation. You can buy building instruction from this website: bauanleitungenmartin.de/epages/2b3a7d49-c69c-49a5-97ec-8445cb4182b7.sf/de_DE/?ObjectPath=/Shops/2b3a7d49-c69c-49a5-97ec-8445cb4182b7/Products/10209 Parts for build can be purchased from Bricklink or Brickowl.

Hi. Excavator is controlled via Sbricks and this is its app to control all functions through bluetooth.

Hi there. You should buy BI instruction here: bauanleitungenmartin.de/epages/2b3a7d49-c69c-49a5-97ec-8445cb4182b7.sf/de_DE/?ObjectPath=/Shops/2b3a7d49-c69c-49a5-97ec-8445cb4182b7/Products/10209 And than all necessary parts here: www.bricklink.com/

Hello, thank you for your comment. And also thanks to Google translator for its translating capability, becouse I No hablo español. Building instruction can be found on this link: bauanleitungenmartin.de/epages/2b3a7d49-c69c-49a5-97ec-8445cb4182b7.mobile/de_DE/?ObjectPath=/Shops/2b3a7d49-c69c-49a5-97ec-8445cb4182b7/Products/10209

Hello. Original building instruction was made with Lego IR receivers, but I'm using four Sbricks and external power source.

Taktéž bude na Floře 👍

Děkuji, jestli budete mit čas a chuť vidět naživo, tak 15. a 16. října na výstavišti Flora v Olomouci na výstavě Svět kostek.

@@kladovec Rozhodně, to si nenechám ujít :D

Hi there, thx for your comment. Did you mean without building instructions? No, I didn´t build it without a manual. If you read some of comments, you will find out, that I´m not author/creator of this. I´m just buy building instructions, all necesseary parts and build it using step by step building instructions.

Hi there, sure. You can find it here: bauanleitungenmartin.de/epages/2b3a7d49-c69c-49a5-97ec-8445cb4182b7.sf/de_DE/?ObjectPath=/Shops/2b3a7d49-c69c-49a5-97ec-8445cb4182b7/Products/10209

@@kladovec thank you! :-)

Děkuji. Jestli budete chtít vidět naživo, přijďte 15. - 16. 10. na výstaviště Flora Olomouc kde proběhne mezinárodní výstava Svět kostek Olomouc 2022.

@@kladovec Dobrý den. Mám na Vás dotaz. Potýkám se s problémem, že u elektrických součástek ( motorky, světla atd. ) mi vždy časem odejdou kabely. Izolace kabelů popraská, začne se drolit a kabílky se zkratují. Bohužel je to po poměrně krátké době použití. Vedl jsem i Lego kroužek a tam jsem řešil stejný problém. Zatím mám jen starší sérii motorků. Chci se Vás zeptat, jaká je Vaše zkušenost a zda nové motorky, již mají nějaký jiný kablík. Co jsem koukal na obrázky, tak mi to přišlo stejné. Děkuji Vám za odpověď.

@@zdenekpinta4376 U PF motorků jsem nikdy neměl problém s nekvalitou kabelů. Mohu se zeptat, zdali se u Vás jedná o starý 9V systém, nebo už PF? Odhaduji, že používáte originální LEGO motorky a nikoliv kopie z číny. U těch ve většině případů používají nekvalitních komponentů včetně přívodních kabelů. Já u tohoto modelu použil motorky z číny od firmy MouldKing - u těch jsem zatím žádný problém nezaznamenal. Recenze na tyto jsou na internetu veskrze pozitivní, tak snad jsem se s nimi nespletl a vydrží dostatečně dlouho. Ceny u originálů začínají stoupat do nereálných výšin z důvodů ukončení výroby.

@@kladovec Ano, používám originál LEGO. Zatím mám starý typ 9V...... ještě bych se Vás rád zeptal jak funguje u nových motorků spárování s mobilem. Dcera má koupený model buginy tam je mi to jasné- Ale pokud stavím svije modely, jak přidělím jednotlivým motorkům a světlům vlastní funkce? Děkuji Vám.

@@zdenekpinta4376 Zdravím, problém s kabeláží, který popisujete je zřejmě způsobený stářím a únavou materiálu. Já zkušenosti se starým 9V systémem nemám, takže jen odhaduji. Co se týče nového Power Up, jestli Vám jde o svůj vlastní ovládací program/obrazovku (nebo jak to mám popsat), tak bych zkusil pomocí tohoto videa, možná Vám to pomůže: kzbin.info/www/bejne/apaukniZp715kM0

😶

What if you just put the tracks on your hand since it's self supporting

Thanks. Did you mean on aux cranes? If so, than it's already done. I made several minor changes, specially on auxilliary cranes. Add third one on the top of fixed arm.

@@kladovec, yes, that's what I'm talking about)

Over 1300 Euro circa.

@@kladovec damn . my crane cost about 800€ and its max height is 1.7m ( if you want to see it look on my yt)

@@the_austrian_brick sorry, I was wrong, this crane wass little cheaper, price repaired. Which your crane do you mean? There is so much videos in your channel.

@@the_austrian_brick Price depend on several things, like from who you order pieces, is it local seller or from other country, has he taxes, fees, how high is shipping, etc. Maybe some other will gona buy parts cheaper. But it depends.

Hello, thank you for your comment. As I mentioned somehere below in other comments. This is not my own creation. I only buy building instruction from guy who made that. Buy all necesseary parts and build it. I took only 10 days for me.

5 years to earn enough money, 1 year to persuade my wife, 1 month to collect all parts and only 10 days to build. 🙂

@@kladovec Wow that’s a long time but it looks like it was worth it!

@@inkydemon2773 It definitely was.

Cual fue el costo del proyecto??

Look this is PDF files with pictures, it's building instructions, not Hamlet. Don't worry. Guy who made that BI probably came from Germany, but he can speak English. Go for it.

Where to find the PDF file for this 288?