Hi, for the Sporter, Hunter Light; Hybrid and Fenris there is a screw in the center of the mechanism, undo that and you can pull the cheekpiece or recoil pad all the way off. On the Bifrost/ Warg/ Ragnarok this adjustment should not be disassembled it is very hard to put back together.

There is no big difference in Calibers. We recommend starting with the 5nm because most rifles perform best around that torque setting. Between 4,5 and 5,5nm is the sweet spot for almost all rifles, and 6nm is the max.

@grsriflestocks And I guess this is because there is no "stiff" structure (aluminium or alike) that the action is bolted into, but a good composite body instead 🤔. Anywho: In my opinion these are wery nice and price worthy stocks 👍🏼👍🏼.

@@johanneslaxell6641 It has more to do with finding the sweet spot for vibration harmonics between the metal and stock. When a shot is fires it creates wave like vibrations in the barrel and action, how hard the action is toqued to the stock effects that. When you fins a sweet spot on load development this means the bullet is leaving the barrel when it is on the outer edge of the movement is has in vibration, it is the same effect on torque settings and this is why we recommend searching between 4,5 and 5nm.

I torqued mine to 5nm and it split the plastic at the rear of the trigger guard around the screw head! Had to buy a replacement and only torque to 3.5nm, no chance the plastic of the trigger guard piece could take 5nm! Wouldn't even take 4nm or I would be buying another trigger guard assembley

@@hollowpoint8800 I guess that anything is possible. I was taking my T3 put of the safe after winter and the retaining piece on the bolt (was plastic) had gotten so brittle that it just fell apart. Luckily a new in metal (aluminium?) was easy and relatively cheap to get. Sorry to hear about your trigger guard 😔, but main thing is that you got it back in shooting order 👍🏼🫡 ...

Hi, Yes, that is the same action as the rifle in the video, you need to buy the FCP bottom metal in addition to our stock. (your bottom metal is integrated into the chassis)

Hi, It does not, but we have the Bifrost, Warg and laminate models for the Mauer Inlet.

Hi, Unfortunately, the demand is very low compared to the investment to develop this. We do offer this in the Laminate models.

@@grsriflestocks Yeah its a curse to be left eye dominant in shooting sports..

Hi, we do not have one, but we can deliver a 1 inch recoil pad instead of the standard 0.5" pad if you need longer LOP.

@@grsriflestocks Hi, I already have that, but a 0.5" spacer would make it perfect.

@@1valg We do not have a solution for this unforunately.

Too bad. Please consider making spacers.

Hi. Sorry to hear that! The Savage is available in LA and SA in the Bifrost and Warg models and Short action only in Fenris. What caliber are you using and do you have a side or bottom bilt release?

@@grsriflestocks the firearm I am asking about is a savage model 12 fv in 6.5 creedmoor and it is side bolt release.

@@darkdevios4169 That would be a Savage 10 inlet. FCP if you have the AICS magazine.

Correct :)

Hi, We will look into it!

Hi, You can do a special order with Bullet Central, and they will add it to the next shipment leaving in June.

Hi, The stocks we have comes with the triggerguard installed. Only thing you need to move is the mag release system form your old stock to the Fenris.

@@grsriflestocks do you have stocks for savage mark II FVSR

At the bottom magnification you see a slight shadow but thats it. On normal magnification you do not see anything.

Yes you can!