Ай бұрын
2 ай бұрын
2 ай бұрын
2 ай бұрын
3 ай бұрын
3 ай бұрын
4 ай бұрын
6 ай бұрын
6 ай бұрын
Пікірлер
@oliverpereira5564 22 сағат бұрын
The work involved the change one wheel you might as well
@litebreeze811 Күн бұрын
Good video, some great tips I'll be using in my prints. We have a Bambu Lab P1s which I'm sure you know does most of the hardware setup stuff automatically, but your slicer settings were very interesting! I'm going to try that on some of my more failure prone prints. Thank you! 😊
@FunnyBacon-ye7kt Күн бұрын
Very cool and useful
@reddotgeek Күн бұрын
Glad you liked it
@Lensman64 4 күн бұрын
...and this is for a SE. I have a KE which is supposed to be auto calibration/leveling and Z offset. Do you know it's been 9 months, 3 tickets filed with Creality, a complete hotbed replacement (Creality sent me the parts under warranty), countless calibration tests, countless adjustments to hardware and I still can't get a level first layer. I'm thinking after 9 months it's about time to get an A1 mini.
@3runsmint192 4 күн бұрын
Is the maximum nozzle temperature still 260°? Or has it increased to 300 like KE version?
@reddotgeek 3 күн бұрын
This nozzle is 60w, max temp is 300C.
@andredevries7558 6 күн бұрын
Sorry my 3v3s3 has better print results than both prints you shown I think you have a print material issue
@reddotgeek 6 күн бұрын
I can also print perfect pieces with a 0.2mm nozzle, 0.1mm layer height, 100mm/s? It's not about printing "nice pieces" here. See the settings - I am literally pushing the limits and printing at 500mm/s to see how Klipper handles it VS Marlin. The limitation is pretty much the PETG though. It strings like crazy, it's not made to print at high flow.
@vishwamanu_28 8 күн бұрын
Hi, I have a ender-3 v3 se, I was hoping if you could give me a little insight on which are the absolute necessary upgrades that are worth doing. Love your vids, keep em coming
@reddotgeek 7 күн бұрын
I am kind of testing out different content, printing different stuff to see which upgrade is worth it. Will do a "final review" eventually. For now - Klipper (Nebula Pad), quick swap nozzle, silicone bed spacers.
@vishwamanu_28 7 күн бұрын
Thanks Please add your final review soon
@elchi_leno4700 10 күн бұрын
Hola amigo, que boquilla usa? Para poder comprar! De la K1!?
@BarPBarPkoyanee 11 күн бұрын
brother cant find the item on your description link. i wanna try it out too, cant find it even if i googled it
@reddotgeek 10 күн бұрын
AE's search is sometimes broken... Not sponsored - www.aliexpress.com/item/1005007635343952.html?spm=a2g0o.productlist.main.77.3f2f4afdWvPjHp&algo_pvid=27e3c71e-111a-448d-8836-0677ec4e4350&algo_exp_id=27e3c71e-111a-448d-8836-0677ec4e4350-38&pdp_npi=4%40dis%21SGD%2172.76%2136.38%21%21%21385.16%21192.58%21%4021015c7617270757818463707e937d%2112000041588290960%21sea%21SG%21759921972%21X&curPageLogUid=y2JBOoaAfnGY&utparam-url=scene%3Asearch%7Cquery_from%3A
@tdx110 11 күн бұрын
After installing the brackets how does the print change? Is it faster to print? More accurate?
@charlino69 12 күн бұрын
I don't notice any change, I'll leave my rods. The shims thas is better idea and I got a very flat bed.
@gerard9210 14 күн бұрын
Its the same if I use a 4020 fan? Thanks for your videos
@reddotgeek 13 күн бұрын
Yes, provided you print a fan mount that can fit. BTW, I have swapped back to a "still noisy but quieter" 2510. The Creality Unicorn Quick Swap hotend fits nicely without any modifications required.
@WesleyNatashaThompson 14 күн бұрын
Thanks for the help great vid!
@reddotgeek 14 күн бұрын
Glad it helped!
@mythl.l.l9397 14 күн бұрын
Is ot worth to make that upgrade?
@reddotgeek 14 күн бұрын
It's pretty much "free" and "recycling" for me. So yes.
@horustineo 15 күн бұрын
Really liked the intro and enjoyed the music. Great modding as well. Just a couple of doubts: 1)why do you keep the sensor on the printer? Did/Will you make a video related to stock vs unicorn systems (performance, max flow rate, etc) Thanks in advance
@reddotgeek 13 күн бұрын
Why would I want to remove the touch sensor? It fits without any issues, no modifications needed with this hotend upgrade. And no, not going to make more videos on this. Flow rate is very subjective BTW - Type of filament, temperature, nozzle size, print speed, etc...
@dungeonslayer4692 16 күн бұрын
I can tell you that kit upgrade it a piece of shit. Gone thru the one I bought and 2 replacements by the company. The stock screws for the fan won't hold to the new heatsink. Then the screws that hold the hot-end to the heatsink have failed coming loose and falling out, as well as the nozzle has come loose every time after a few prints. Some major flaws to that replacement kit.
@reddotgeek 16 күн бұрын
I printed an entire Gridfinity drawer, used an entire spool, and swapped between 0.2 0.4 0.6. Nothing came loose, no clogs, perfect prints... I guess I got lucky with a good batch.
@dungeonslayer4692 16 күн бұрын
@@reddotgeek You did for sure! Apparently I got sent the crap ones in a batch. In general though I've had to do some much work to my KE to fix bad bed level bent shafts, vibration issues, fan fails etc., I'm moving on to another brand.
@-Darkweider 18 күн бұрын
Креативное видео, браво!
@LM-qe8kv 19 күн бұрын
Yeah yeah I get the comedic aspect of the music but this tutorial is useless. Waste of my time
@robbbert229 20 күн бұрын
I always sub when I see gridfinity. We will watch your career with great interest.
@reddotgeek 20 күн бұрын
Glad you enjoyed, thanks for the sub!
@nogthree 20 күн бұрын
Nice work, the algorithm blesses you today.
@minidotrar878 21 күн бұрын
Those lights are such a fantastic finishing touch
@reddotgeek 21 күн бұрын
Yes, they work unexpectedly well with transparent bins.
@sapandeepsandhu4410 22 күн бұрын
which type of printer you use , how to learn 3d printing from basics
@reddotgeek 22 күн бұрын
I am using an Ender 3 V3 SE, but I will recommend a Bambu Lab A1 mini. 3D printing is a lot easier these days, start with this - kzbin.info/www/bejne/o2KVk4tnmqqJeq8
@tdx110 22 күн бұрын
Thanks a lot. I wanted to upgrade the printer, but now I see that it makes no sense. It is clear that Creality knows what they are doing.
@reddotgeek 22 күн бұрын
Yes, the original rods work just fine. After having this for a few months - I will say that an upgraded nozzle is a better choice for "faster printing".
@stefanNT_1008 23 күн бұрын
Very nice work, would you say that the nebula pad offers quality improvements over the regular firmware?
@reddotgeek 22 күн бұрын
Yes, absolutely. Nebula pad is running Klipper, has a ton of features over stock Marlin.
@stefanNT_1008 22 күн бұрын
@@reddotgeek Cheers mate, thank you for the content, and the feedback!
@artemmihailovich 23 күн бұрын
Здравствуйте. У меня проблема по оси z. Если справа, где нет мотора, шатать слегка крепление вала, присутствует небольшой люфт. Вы не знаете, как эту проблему можно решить? Спасибо)
@unusuariomas9002 26 күн бұрын
Hi Mate! Latelly i have some problems with my 3 V3 SE, the filament don't melt well, and it won't stay in the bed, also, the filament that extrudes sometimes make little balls or don't go off the Noozle... I tried to clean the Noozle, change it, calibrate the bed several times, adjust the Z-Offset, update firmware, adjust the belts and adjust the bed screws, change the filament and test with other temperatures and speeds but NOTHING works... What else can I try? Do you have similar problems? Thanks!
@reddotgeek 24 күн бұрын
Adhesion problems - Try switching to a textured PEI plate, add some 3D printer PVA glue before printing. Also, slow down the first layer, I sometimes go as slow as 10~30mm/s.
@antoniosa 27 күн бұрын
Hey. On my kit, I received two Teflon tubes (28mm and 22mm), which use (I think the 22mm). And the Thermal Grease? It's just to fill the package ? :) One more question: To reach 300 degres, you are using Klipper, right ?
@reddotgeek 24 күн бұрын
I have swapped between 0.2, 0.4, 0.6 nozzles. Not once have I used the Thermal Grease... So yep, guess it's there to fill up space. 🤣 I have only gone up to 240c for PETG, but if I remember correct - You will have to do some changes in the config file.
@antoniosa 24 күн бұрын
@@reddotgeek Here is working great.. Better that the original. Thanks man.
@GeoffSeeley 21 күн бұрын
@@reddotgeek the thermal grease goes on the nozzle where your thumb is @1:15 and you can see the old/dry grey/white grease. Like a CPU, it should be replaced each time you remove the nozzle from the heatsink.
@GeoffSeeley 21 күн бұрын
You should also do a PID tune so Klipper knows how to regulate the new hot end's temperature.
@antoniosa 20 күн бұрын
@@GeoffSeeley I am new to Klipper... What do you mean? :)
@mrmango8193 28 күн бұрын
What slicer is that?
@mrmango8193 28 күн бұрын
Nvm
@antoniosa 28 күн бұрын
Great videos 🎉🎉🎉 Why the left rubber had differents sizes ? Could you write here the sizes ? Cheers
@unusuariomas9002 Ай бұрын
I'm seein ALL your Ender 3 V3 SE upgrades today, amazing job! But only one question: What improves make this upgrade? Is it worth it?
@reddotgeek 29 күн бұрын
Worth it... If you intend to print Nylon and Polycarbonate, or if you often swap the nozzle.
@unusuariomas9002 29 күн бұрын
@@reddotgeek There's no difference with speed or quality with regular PLA o PETG?
@unusuariomas9002 Ай бұрын
I have the same trolling manual that said only 3 Pin connector, now i have to buy it again because i return it and installing it again but correctly 😂
@abderrahim6332 Ай бұрын
bro was really measuring his finger 1:18 XD
@punkreeperful Ай бұрын
Is there no option to clean the fan to make it quiet again?
@reddotgeek Ай бұрын
Cleaning won't do anything, it's a problem with the design. I ended up changing to a quieter 2510 fan in the end... Still noisy, but not as bad as the stock Creality.
@furcin Ай бұрын
Tnks my friend. Solvedmy problem. God bless u.
@reddotgeek Ай бұрын
Glad to hear that
@TheWhisskas Ай бұрын
After updating, which printer profile should I use? K E versions? or could you share the printer profile settings in the slicer?
@reddotgeek Ай бұрын
You can stick with the SE profile. Under "manage printer" > switch on "advanced" > just change "G-code flavor" to "Klipper".
@walkerdourado Ай бұрын
Nice, im new here but liked your content so much. I get mine yesterday on ali, hope to be able to print decently. The speed of printing really are improved with it?
@reddotgeek Ай бұрын
Well, yes and no. The nozzle is one thing, the filament another - You can only print as fast as the filament allows. You will have to get a roll of high flow or high speed filament if you want to go fast.
@noahyoungman7324 Ай бұрын
It seems as though auto leveling is a gift from god but in reality once you get it you realize you like being able to turn a single screw to adjust your bed. I have wasted so much time waiting for my bed to level itself, only to not be level like I want it. My ender 3 v3 se was great until it wasn’t. I wish I would’ve spent my money on a Bambu labs printer instead.
@ayamkrew Ай бұрын
Sorry for my noob question, what advantages for changing the hot end? For variety filament use?
@reddotgeek Ай бұрын
1) Higher max temperature - The ceramic hotend can go up to 300c, allowing you to print Nylon and Polycarbonate. 2) Faster heating - Literally cuts the initial heating time into seconds. 3) Quick swap - Don't need to take out the cover/sock, no preheat required. Just replace the nozzle directly.
@jacobstuntz8617 Ай бұрын
@@reddotgeekwhat is the difference between the Teflon tube and the stock PTFE Tube? I thought the all metal would get rid of that tube (total noob here as well)
@sebastianlista5935 Ай бұрын
Nice video bro!! But the music its amazing!!!! Upload the file in mp3
@antoniosa Ай бұрын
Cool. Now there's no need to put some aditional nuts in the CR-TOUCH
@Vexix2 Ай бұрын
Thanks for the video. I had exactly the same problems what you had when installing filament runout sensor to my Ender.
@harel586 Ай бұрын
What nozzles you got to get to use this ceramic hotend? Can you add a link for those
@reddotgeek Ай бұрын
Added to description, it's called "Creality Unicorn Quick Swap Nozzle". They are also everywhere on Amazon, eBay, AE.
@harel586 Ай бұрын
Really like your videos. I got a se and Im following your upgrades and doing them to my printer. Already upgraded linear rails, fans, extruder…
@SkidmarksGuide Ай бұрын
Hey Heads up Some people have seizures so please be mindful of flashing lights
@jared1321 Ай бұрын
Are the stls hosted somewhere?
@kohutryu2269 Ай бұрын
You're thinking the same thing as me. I have the same 3D printer and I'm doing almost the same upgrade. Thank you for your help. I'm looking forward to the future
@reddotgeek Ай бұрын
Glad it was helpful!
@NavyVet2243 Ай бұрын
Loved the videos and especially the duck😂😂 appreciate the videos and what you've done 🎉
@reddotgeek Ай бұрын
Glad you like them!
@artan6972 Ай бұрын
Dude, I've been following you for a short time, and as one of your young followers, I congratulate you. I wish you all the best on your journey.
@weslleypereira5111 Ай бұрын
Amigo seu videos sao top queria saber trocabdo essa peça ai presiso troca outra coisa alem dela pq a minha ta de fabrica asim ainda
@gergohochoner6597 Ай бұрын
Maybe if you set the manual focus on the camera....