Thankyou for the walkthrough. Same thing happened to me today. I know I did over tighten the bolts so that's probably what caused.
@LouDC127 күн бұрын
It doesn’t work for me but m using the latrax teton
@miksterr8 күн бұрын
WOW. Ok everyone who has or is watching this. Please forget all you saw. No tinning, and the worst part - take a look at the -ve & +ve he used the same plugs on both!!! This allows an error to be made where all the magic smoke will leave your expensive esc. There should be a plug and socket on the esc with the corresponding same on the battery.
@Cadillac_Collector10 күн бұрын
It’s not the servo it’s the steering system I build nothing but aarmas and got an xo1 to see if I liked it… it’s ok but it needs a lot of setting up right out the box to include metal arms… shims… and a aluminum steering system 😅. My runs on 8s
@djetronakanorte11 күн бұрын
Really well done my friend mine is just as fast or faster. I've just done an upgrade on my FTX Banzai it's just as faster than the stinger with the same shell I've named him Frankinstinger 😂
@oupekha12 күн бұрын
I have a rock crawler it needs two motors it doesn't have much room for two battery is it possible to use one and use the Y connector?
@rcusa20110 күн бұрын
Yeah u can split the battery power
@steevm1913 күн бұрын
Ready, i think it will works.
@TrouserSnake6913 күн бұрын
3 in 1 oil also works good been using it for 15 years
@jmaclaren414713 күн бұрын
Dried /solidified castor oil on the bearings. Oil them and run the engine.
@scottm239814 күн бұрын
Have you stripped any diff pinion gears at all without a slipper??
@nuraman0016 күн бұрын
Thank you.
@flhandster439517 күн бұрын
How have the slicks held up over time? Thanks.
@jayski898718 күн бұрын
What do you do if connecting rod is broken?
@greenie4318 күн бұрын
Great job, bro!! Came in handy!! 😎👍
@Flyingsquirel12119 күн бұрын
That’s cool but there’s no way that’s the world record
@robertruiz541719 күн бұрын
Amazing run thank you for sharing
@1arrays19 күн бұрын
i think i broke my idle gap needle it wont move when i screw it in or out it wont fully stop like stripped screw
@rcusa20119 күн бұрын
Uh ohh
@CJTJBIshorts20 күн бұрын
First
@neonpuke21 күн бұрын
why not just flip the bear where the missing sheild is on the inside? works on my skateboard.
@rcusa20119 күн бұрын
Good idea
@AquariumAficionado22 күн бұрын
Your friend must baby his trucks if he doesn’t want it after an a arm breaks😂💀 I’ve broken every part of my trucks including the chassis and just rebuild make it better
@gillian917823 күн бұрын
How do you find the Panther Graphene batteries compare to other batteries for speed runs. Reason I ask is RC Explained done a video recently on the 5000mah Panther Graphene batteries to get the true C rating, he claimed the C rating he got was under 25c.
@rcusa20119 күн бұрын
I like them I use them for speed run as well
@boa214365870924 күн бұрын
This looks really good. I'm in the process of turning my rustler into an aluminum red bandit and ordered this kit as well, I didn't get the hardware with mine but it's on my list. Once I've got it all upgraded then I plan to get a nice brushless system for it.
@ReaZaaa25 күн бұрын
no part 3? 🥺 Did it start?
@rcusa20119 күн бұрын
Yeah it did
@MV-df8jl27 күн бұрын
You are super optimistic, if it’s me, that car was totaled 🤷🏻♂️
@rcusa20119 күн бұрын
I rebuilt it come to find out my range booster didn’t make good connection at a teen jumper cable it’s the ready I had like 12 crashed
@MRBRUSHLESS27 күн бұрын
Nice work on the installation looks great big like 1 👍
@rcusa20119 күн бұрын
Thank you 👍
@stephensparkman523327 күн бұрын
The camera was facing the table. I didn’t even get to see you turn the Allen wrench bro lol
@rcusa20119 күн бұрын
Sorry
@josephocarez292528 күн бұрын
My HSP doesn't move backwards
@scottm239828 күн бұрын
Dude the hell are those bearings on the driveshaft going to do?? They're not even held in place by anything .. like they are on the typhon 3s
@rcusa20119 күн бұрын
It works
@dakofalltradesАй бұрын
I run a tlr typhon ..mojave ..and outcast looking for somewhere to run these beastb.. Nice speed with the hoss btw
@rcusa20119 күн бұрын
Caldwell is the place
@dakofalltradesАй бұрын
Hey bro my name is dak is this located in jersey city??
@rcusa20119 күн бұрын
Nah Caldwell nj like 20 minutes drive I go there offer u can come through
@tuanas458Ай бұрын
lol youre into rc motors too when ur not working on cars???
no you're just clueless and don't know a thing about nitro RC cars apparently you've never changed a spark plug on a real vehicle either
@dakofalltradesАй бұрын
Bro I'm in jersey city where is this place so I can run my typhon a n d mojave
@rcusa201Ай бұрын
Henderson nj good spot we was there today I did some record braking
@TheDemonic38Ай бұрын
Traxxas 3232x plugs are garbage mass produced in china , the best plug to run with the 2.5 3.3 is the OS LC3 standard ,long reach,hot plug made in Japan there Expensive, but awesome quality . awesome video 👍🏻
@barryriffle8076Ай бұрын
wouldnt call this a mod. but it is an upgrade
@rcusa201Ай бұрын
Ok
@aimlockersesp7680Ай бұрын
The nitro car is not tuned acceleration on the nitro Is reallly bad somebody who tuned that nitro is a bad tuner
@qow.hАй бұрын
I NEED HELP MOJAV KRATON OR GRANIT 4s
@rcusa201Ай бұрын
Mojave over then bot but 6s 4s is on also
@unknown-mw9grАй бұрын
great video,btw what part in nitro engine wears fisrt ? what should i buy in spare, thank you
@rcusa201Ай бұрын
Depends how u abuse it my piston and sleeve got damaged and rod
@ginovietoАй бұрын
I think you mounted the rear lights on the front and front on the rear.
@MohammedBinLivinАй бұрын
Great video bud, keep up the awesome work! 😊
@JamesGratesАй бұрын
Get rid of that servo make sure your alignment is spot on lower steering speed and dual rate on remote
@Wazza722Ай бұрын
That was some serious out of controlness!
@carlosrubio7455Ай бұрын
Y qué variador me recomienda para TP 3640 CM de 8s ??
@rcusa201Ай бұрын
Huh
@carlosrubio7455Ай бұрын
Pleace, esc for TP 3640 cm
@carlosrubio7455Ай бұрын
Hola a ver si me puedes ayudar necesito comprar ruedas de alta velocidad en España y no las encuentro