Mike Clarke

Пікірлер

@fmeclarke 26 күн бұрын

Sorry I put in 3mm instead of 1.5 mm for the material thickness I am using at the 2:23 mark

@breth8965 Ай бұрын

Our vision pro software does not have the scan tool icon on our left tool bar. Is there somewhere we should be looking to add it? We are trying to etch a bitmap image as well.

@fmeclarke 2 күн бұрын

Hi Sorry not sure on the one

@BrendaDavis-1963 Ай бұрын

Did not work

@fmeclarke 2 күн бұрын

Hi Brenda. are you using a Yeti. If so be careful as sometimes the background is clean and the colour reflected back on it. Compare it with the silver Yeti logo

@BrendaDavis-1963 Ай бұрын

Very nice thank you I just engraved my first Tumblr, but it was really dull so tomorrow I go to Walmart and get a magic eraser. Thank you for the tip.

@samanthatataryn1315 3 ай бұрын

I had someone engrave my yeti mugs and it looks like it didn’t go all the way through the paint in cone areas. Would this clean off any left over paint on the engraving?!

@fmeclarke 2 күн бұрын

sorry but no

@liviaalves5764 3 ай бұрын

Olá, pode ser feito o foil no papel?

@Moe_Z_ 4 ай бұрын

This wasn’t exactly what i needed but definitely helped, thanks

@horatioh.davisbeyiii1155 4 ай бұрын

Shalom family, this is sweet! I love this!! Keep inspiring in Jesus name!!!

@doctorfiras 4 ай бұрын

Hi there Mike! I have a green yeti rambler that fits tight into my car cupholder. Over time it collected a whitish shading on top of the duracoat from where it goes into the plastic cupholder that doesn't come off with soap and water. Any ideas how to get rid of that without damaging the duracoat? Thank you! I originally tried to comment this on a different video you had but it didn't go through.

@fmeclarke 2 күн бұрын

Did you try a mr clean magic eraser

@doctorfiras 4 ай бұрын

@MileyonDisney 4 ай бұрын

c o o l

@vignesh1771 5 ай бұрын

Hi boss.after sharpen all are we need to convert to halftone?

@fmeclarke 2 күн бұрын

yes. You may have to convert to black and white in either your design software or in the laser software (look for Jarvis or stucki

@mfcrox 6 ай бұрын

This is a great tutorial. All I could think whilst watching it though was "Jeez, this dude sounds like James Hetfield".

@viktorperalta3090 7 ай бұрын

I have my picture nice and clean, but yours looks like your.did something before you invert the colors? Do you have a video for that step pls . 🙏

@ypschwartzy2765 7 ай бұрын

Do you think this will restore the Yeti Camo 1.0 Tumblers from 2018. Will this product restore to original colors or close to it or is it just for stainless steel?

@fmeclarke 5 ай бұрын

this is designed to remove any remaining dull ness to the steel not renew a colour

@straywelshone 7 ай бұрын

Can't get this type of foil anywhere in the uk

@fmeclarke 5 ай бұрын

you can ask Trotec UK that might have it

@straywelshone 5 ай бұрын

@@fmeclarke no they don't stock it . Thankyou

@remnantsrain 7 ай бұрын

Hi Mike, how do a change the colour of the text box to transparent please

@fmeclarke 5 ай бұрын

the text box should always be transparent. If you can not see the text than elect it and press the shift key and while holding it press the page up. This will put the text in front of the coloured box or image

@robinslater424 7 ай бұрын

Finally a video that gets to the point 🎉😊

@benjaminpastrana9662 7 ай бұрын

Specific supplier for the foil?🙌

@fmeclarke 5 ай бұрын

in the US go to Johnson Plastics or in Canada Trotec Laser

@LaserGuy62 8 ай бұрын

Hi Mike I have a Yeti that has a step down. It's a 26oz Rambler with a 12.5" circumference at the top with a 2.5" flat area, then it steps down to 11.5" circumference at the 2.5" mark that drops to 9" at the very bottom. Is there any easy way to calculate the size you should enter when you open the Rotary Docker.

@fmeclarke 7 ай бұрын

Not that I know of. There are a couple of techniques I have thought about which I would like to explore

@akashchandra1074 8 ай бұрын

file dawonload?

@fmeclarke 5 ай бұрын

just do it in note pad and save it as a txt file

@LaserGuy62 8 ай бұрын

Thanks Mike, that's going to make life a lot more secure.

@bb-r5710 9 ай бұрын

Excellent video. I truly enjoy using Ruby software ❤

@Cncking 9 ай бұрын

Thanks for the detailed explanation and tutorial Mike - your dedication and passion is fantastic!

@LaserGuy62 9 ай бұрын

Hi Mike Is there a formula to figure out the best size of graphics to use on specific sizes of Rotary objects. ( I know that experience is the best guide) but Yeti has so many different sizes in their line up of drinkware, I am always wasting time trying different size layouts on scraps, it would be cool to be able to just look at a chart and use it to take the guess work out of it all.

@fmeclarke 9 ай бұрын

Size is dictated by your laser time, The bigger the logo the more you charge. Just remember beauty is in the eye of the beholder

@fmeclarke 9 ай бұрын

PS yeti mug video coming in a day

@LaserGuy62 9 ай бұрын

@@fmeclarke Thanks Mike, I look forward to watching the next video. I've just upgraded to a Subscription to CorelDraw 2024 (25) and am amazed at all the new features that have been added. It really makes designing graphics so much easier.

@LaserGuy62 9 ай бұрын

Another great video Mike. I look forward to more. I have been really leery of using the rotary with Ruby especially when doing Yeti's because they are just too expensive to replace if I make a mistake, I already have a small collection of them.

@gerritgeldenhuys2763 10 ай бұрын

A plucking tweezer work well for getting a hold once you've loosened a corner

@fmeclarke 5 ай бұрын

perfect suggestion

@reuben1021 10 ай бұрын

Which one is the contrast enhancement option in the new corel draw version?

@deenahulen3168 10 ай бұрын

Can you tell me where you got the Harley file from?

@fmeclarke 9 ай бұрын

brands of the world

@DanaHaberkorn 11 ай бұрын

Did you paint the back of this acrylic for this?

@fmeclarke 9 ай бұрын

No there is a black piece of wood behind

@GeorgiosFoltopoulos 11 ай бұрын

Hi can you tell me what power and speed used to avoid a blurry result?

@fmeclarke 9 ай бұрын

80 watt machine is 100 speedy 60 power

@IvanCollazo-q9g Жыл бұрын

Quedo cabron. Felicdades,

@mrodtothe90 Жыл бұрын

How much do you spend on yeti mugs?

@fmeclarke 9 ай бұрын

I just get them online

@twistedstitchesembroideryd627 Жыл бұрын

Thanks for this vid. I'm using 2018 Tech Suite. My text orientation tool is not there. How can I make this visible on the top of the tool bar like yours is?

@twistedstitchesembroideryd627 Жыл бұрын

All of a sudden it's visible now.

@KeithAngelaManalo Жыл бұрын

how can i hide the cirle?

@fmeclarke Жыл бұрын

Click on the circle and right click on the "x" that is at the top of the colour palette and this will remove the colour and the line width. DO not delete the line as the text will not be editable anymore

@ngaquynh8890 Жыл бұрын

I saw the plates you did copied horizontally. But when I did The plates were copied vertically. Can you give me the idea how to copy plates horizontally . Thank you very much

@SusanRoot-g4h Жыл бұрын

Are you available for questions regarding xenetech?

@joeldiaz118 Жыл бұрын

What is the machine number?

@fmeclarke Жыл бұрын

Trotec Speedy 300

@devanmcgregor7090 Жыл бұрын

Abs burns black

@melissahertneky6763 Жыл бұрын

I have the LA clean and the magic eraser but, my lettering is still black. Any tips you could give?

@fmeclarke Жыл бұрын

Sorry. You may need to use more power

@fjorgthebuilder Жыл бұрын

I know this is an older video, but I am looking to pick up a laser for my office. We currently cut Phenolic labels for electrical panels with a CNC Shark. We struggle with getting the material and the cutting surface level and consistent, so we are considering a laser, but have no idea what to get. We cut maybe a hundred labels a month with a batch of around 30 each time. Do you have any suggestions for us?

@fmeclarke Жыл бұрын

Sorry a bit late on this one. You can not cut Phenolic on the laser. You can cut lamacoid

@mattnearytrieshard 11 ай бұрын

Man if you figure out something that does it easy and well let me know. I've been doing the same with some rowmark materials for a panel shop. I have the same issues with you on my cnc. I bought an omtech cO2 laser, and am not really impressed with my results. Even following the recommendations in the video. I still get some lines, and have issues cleaning after. @fmeclarke I've noticed a lot of people from the electrical industry use the term phenolic like some people use kleenex for tissue. They often are just referring to the two layer engrave-able plastic.

@gregprokuda6061 11 ай бұрын

We make a ton of labels for our Electrical contractors. I work at an electrical wholesaler and we provide this service at a fee of course. We use the VLS2.30DT by Universal Laser Systems. After we rast the wording, I mask the whole sheet with Yellow Masking tape( the least sticky masking tape a painter will use) then we cut the material with a vector and leave the tape on the lamacoid. There is no clean up required and leaves you with a perfect adge with no discoloration on the vector cut. Just trying to deal with the stick edges now. But the contractors dont really mind that part.@@mattnearytrieshard

@gilbertboyer9936 Жыл бұрын

Hey Mike, very nice video and product. Well done.

@markjohnson8021 Жыл бұрын

Hi where did you get the laser foil from please

@fmeclarke 9 ай бұрын

you can get it from Trotec or JDS awards

@fivostsiplakis562 Жыл бұрын

What is the black material you stick the foil on?

@fmeclarke 5 ай бұрын

that is a piano finish plaque

@andrearsilva Жыл бұрын

Man, you saved my life with this product, thank you!

@irissalas6839 Жыл бұрын

What paper is it? Can it be used with any laser machine, Glowforge or LaserPecker?

@fmeclarke 5 ай бұрын

with those machines you will get brown edges on the paper

@rellamakatsa5351 Жыл бұрын

life saver!

@kelvinmoore-cg5gu Жыл бұрын

Thanks for the video. It is quick to understand.

@Jjag4021 Жыл бұрын

Hi Mike, thanks for the video, I am having an issue and was hoping you could help I get the transparent background, save as photo paint file but when I import into Corel draw it is not transparent, there is a white background, any advice would be great

@fmeclarke 9 ай бұрын

The image has to be saved as a Corel Photopaint not JPG and imported into Corel Draw

Ең жақсы KZbin

Пікірлер