Is there a version of this that could be used on Blind threaded holes. A threaded post would expand then pull down the workpiece?
@aldebaran65054 ай бұрын
AHHHH VERY GOOD
@sertaliozer14 ай бұрын
Can I get the cad of this? To see if it fits into our prototype and for a potential order?
@IMAOcorporation_global4 ай бұрын
Thanks for your comment! Here is our lineup of One Touch Fasterners. www.imao.com/catalog/en/imageindexlists2/?categorycode=%24SMEOFS The CAD files are available for download on the next page after you choose and click on the required product. And for your information, our products are available through our distribution partners. Please see the link below for our sales network. www.imao.com/en/salesnetwork/
@nepheartgaming7 ай бұрын
how to buy from Malaysia?
@IMAOcorporation_global7 ай бұрын
Thanks for your comment! You can buy our products from Imao Machine Components Pte Ltd in Singapore. Here is their website: www.imao-ind.com/contact.php
@ludwigpilsl20087 ай бұрын
Where can i buy this?
@IMAOcorporation_global7 ай бұрын
Thanks for your comment! Please check here and contact our partner in your country. www.imao.com/en/salesnetwork/
@riley24448 ай бұрын
how do i get one for Australia
@IMAOcorporation_global8 ай бұрын
Thanks for your comment! You can buy our products from Romheld Automation Pty Ltd in Australia. This is Romheld 's website: romheld.com.au/
@whoankur9 ай бұрын
Contact info for India and Europr pls
@IMAOcorporation_global9 ай бұрын
Thank you for your comment! Please refer to the link below for contact information of our partners. www.imao.com/en/salesnetwork/
@freenational11 ай бұрын
I am located in Malaysia. Where to buy?
@IMAOcorporation_global11 ай бұрын
Thanks for your comment! You can buy our products from Imao Machine Components in Singapore. This is IMC's website: www.imao-ind.com/
@freenational11 ай бұрын
Thank you.
@sanjaykoyal8513 Жыл бұрын
Very nice clamping systems. 👍
@IMAOcorporation_global Жыл бұрын
Thanks a lot, we hope you will have a good use for our clamps.
@BernardMartinCortile Жыл бұрын
LOL. I have met some women in machine shops who are stronger than some men. I surprised you haven't had more pushback on this 😂
@carlbeaver7112 Жыл бұрын
Nice product. Too bad you have no idea how to market it.
@IMAOcorporation_global Жыл бұрын
Thanks for the compliment! Please check our distributors in the world and contact one of them. www.imao.com/en/salesnetwork/
@jamie-th8zw Жыл бұрын
Where can you buy these from in the uk?
@IMAOcorporation_global Жыл бұрын
Thank you for your comment! In your country, our UK partner Wixroyd will be happy to assist you. Please refer to the link below for Wixroyd's contact detail and contact them for quotations. www.imao.com/en/salesnetwork/
@danymaruani52232 жыл бұрын
Genial !
@IMAOcorporation_global2 жыл бұрын
Thanks for the compliment! Here are the details of One-touch Sliding lock. www.imao.com/en/products/onetouchslidelock-en.html
@pointer7pl2 жыл бұрын
can this be smaller ?
@IMAOcorporation_global2 жыл бұрын
Thanks for your comment! As this product is designed to fit digital position indicators, we offer only two sizes in our lineup.
@macnblast29602 жыл бұрын
Causes surface damage to parts.....I wouldn't use these if they were free.
@IMAOcorporation_global2 жыл бұрын
Thank you for your comment. These clamps are for firm clamping from the side and for workpieces where surface scratches are not a problem, such as iron or cast iron.
@PaulG.3698 ай бұрын
Bruh, all push clamps are gonna do that. Surface damage can easily by avoided by using a spacer between the clamp and the workpiece.
@satyavishwakarma11802 жыл бұрын
Hlo
@satyavishwakarma11802 жыл бұрын
Contact email
@IMAOcorporation_global2 жыл бұрын
Thank you for your interest! Please check our distributors in the world and contact one nearest you. www.imao.com/en/distributors/
@s.janakiammamusicparadise61372 жыл бұрын
Sir,how can I contact to u?I need one special type collet for polygon milling machine od clamping area only one mm
@IMAOcorporation_global2 жыл бұрын
Form Holding Clamps may be a choice for you. Please see: kzbin.info/www/bejne/bKGTf4eFh6qMiJo For contact, please check here and contact our partner in your country. www.imao.com/en/distributors/
@bansheee13 жыл бұрын
I wonder if i can find this here in Istanbul.If not i am totally gonna try to copy somehow cos i loved this
@IMAOcorporation_global3 жыл бұрын
Thank you bandd1! You can buy these from ER-EL in Kocaeli. This is ER-EL website: www.er-el.com.tr/
@shaufimkhanpathan57633 жыл бұрын
Need clamping force details if possible
@IMAOcorporation_global3 жыл бұрын
Thank you for your message. The max. clamping force is 12kN and you can check the details on our website. www.imao.com/en/products/formclamp-en.html
@surasitchitthaisong43683 жыл бұрын
มือสวยจัง
@skylerlabsing.40283 жыл бұрын
Price? Thank you.
@IMAOcorporation_global3 жыл бұрын
Thank you for your interest in our clamp. Please contact IMAO distributor in or around your country to ask for the quotation. www.imao.com/en/distributors/
@Gonzalo_Amorales4 жыл бұрын
All chucks to scrap! Just drill several holes in your part, then make tread, screw several bolts and go! Right? So, why we still not moving more far by progress and not use electrical welding for fixing workparts?
@IMAOcorporation_global4 жыл бұрын
Yes, you just need to make c'bored tapped holes and mount clamping screws, then start machining! You can remove the workpiece and mount the another one just by rotating the locking screw of the modules.
@realism.project4 жыл бұрын
New innovation
@173roberto4 жыл бұрын
Amazing, how much they cost?
@IMAOcorporation_global4 жыл бұрын
Thank you for your interest in our clamps. Please check our distributors in the world and contact one of them. www.imao.com/en/distributors/
@claudiugalea30384 жыл бұрын
the stop is custom made for the example?
@IMAOcorporation_global4 жыл бұрын
The stops in the video are custom-made. We have some standard stops but our customers make custom stops which fit the workpieces in many cases. Making a custom clamp is very difficult but a custom stop is easy.
@md.mahfuz4 жыл бұрын
@IMAOcorporation English You should show some real life usages of these "One-Touch Fastener". This way people will be more interested to buy your products.
@IMAOcorporation_global4 жыл бұрын
Thank you for your advice. We will try to add videos of real applications in the future. If you visit our website, you can see case reports of real customers. www.imao.com/en/products/onetouchchakudatsu-en.html
@md.mahfuz4 жыл бұрын
@@IMAOcorporation_global You are welcome :) . OK, I will visit your website.
@IMAOcorporation_global5 жыл бұрын
O-ring is included in a set to put on the jaw base to prevent chips stuck inside. Also, chips on the jaw can be cleaned out by air-brow.
@manojv28406 жыл бұрын
chips will stuck clamp
@sumipalson45085 жыл бұрын
yes very true..
@surajkhot26756 жыл бұрын
How its accurate and at how much force it can sustain
@IMAOcorporation_global5 жыл бұрын
Thank you for your interests in our product. Please check the details in the following page. Thank you! www.imao.com/en/products/onetouchslidelock-en.html
@williammagill99776 жыл бұрын
Who stocks these in the uk?
@IMAOcorporation_global6 жыл бұрын
Thank you for your interest in our products. Wixroyd International is our distributor in UK.
@jacks198226 жыл бұрын
how and where to buy please?
@IMAOcorporation_global6 жыл бұрын
Thank you for showing interest in IMAO products. Please find the distributor in your country on our website and contact him. www.imao.com/en/distributors/
@timetodopatriotstuff23157 жыл бұрын
When you stack those things two or three high I can just imagine the chatter you would get on anything harder than aluminum.
@IMAOcorporation_global7 жыл бұрын
You are right. When you stack two or more modules, the rigidity becomes lower. We recommend to use single module as long as your workpiece does not interfere with fixture plate or cutting tool.
@timetodopatriotstuff23157 жыл бұрын
It look's like a real versatil and use full product if you think ahead in your design planning.
@timetodopatriotstuff23157 жыл бұрын
Nice work holding how deep can you cut the jaw plate I do a lot of one to 10 OP'S and would like to cut 3/8 deep then face it and use it again would that be possible.
@IMAOcorporation_global7 жыл бұрын
If you use the biggest or 2nd biggest jaw, you can cut it by 25 or 20mm. Please note the clamping stroke decreases a little bit in your second use.
@timetodopatriotstuff23157 жыл бұрын
Thank's for the reply seem's like a real nice solution for holding odd part's.