I blow the panel gaps, mirrors etc and then follow up with a towel and a drying aid.
@SupremeAuto-ShineСағат бұрын
Great video Nick, using the Blower with your Detailer spray was an absolute game changer for me, unreal results and one very happy customer 😃
@justingrainger66272 күн бұрын
Can it go on top of a fusso waxed car ?
@YumCars3 сағат бұрын
Yes it certainly can, but would be best to use our drying aid detail spray for regular toppers
@justingrainger66272 сағат бұрын
@@YumCars thank you
@Wanderer3893 күн бұрын
Don’t understand why you would want to waste so much product in the air when you could apply it to a micro fibre cloth first
@Sujit_Nair4 күн бұрын
Sorry for the dumb question. Is this permenant?
@neilwatson76704 күн бұрын
I didn't pre wash my wheels before but definitely something I will be doing moving forward 👍
@RCdetails2036 күн бұрын
Question for you, is there a dilution for using Wheel Foam in a hand foamer instead of a foam cannon ?
@JG1293-x2t7 күн бұрын
Can the wheel foam be applicated using a pump sprayer or its best to use on foam cannon?
@pauldallaston86478 күн бұрын
I’ve always pre washed alloys as I thought well if I’m doing the lower section of the car might as well carry on to the wheels, and now you’ve proven me right 🙌
@daveythomas44738 күн бұрын
Any good for ceramic coated car
@trifin57728 күн бұрын
Klin Korea hd drying towel with micro twist loops is best drying towel… tell me I’m wrong?
@ad4mbradley7338 күн бұрын
Always good videos Nick, i will start using this procedure when alloys really dirty. Is there anyway to stop the brake rust? Annoying after cleaned and the rust all over the alloys
@DiiZeh_9 күн бұрын
People pre-wash the paintwork - so why do they treat the wheels differently? ALWAYS pre clean 👍
@marktaylor95799 күн бұрын
Yep, I'm a wheel pre washer either Yum Citrus or Yum Wheel Foam on my black alloys, or the last of my Bilt Hamber Touchless on the wife and kids cars. Then a good rinse.
@owensteele16459 күн бұрын
Great video Nick. I always pre-wash my alloys, but I start with the back wheels first due to them being less dirty than the fronts. As a Volkswagen driver myself, I find my Polo's front alloys get caked in brake dust a lot quicker than I'm used to, with my previous posh but tired old Peugeot 206 Roland Garros. They have to be thoroughly washed and blow-dried every week to make cleaning easier and I don't risk scratching them. Undress is still my go-to for de-contaminating tyres.
@johnbrown39519 күн бұрын
I pre wash my wheels along with my paint with citrus or citrus infused snow foam or alkaline snow foam then use a wheel cleaner overlaid with a wheel shampoo in my foamer prior to any contact with the wheel with a brush or wheel mitt.
I've just followed this exact method for the first time, as I only got the Wheel Woolies from you a week or so ago (with the Kranzle O-Rings, thank you). It's unbelievable how clean and shiny my gloss black alloys are now. I was also amazed at just how good the YumCars Wheel Woolies actually are. Wheel cleaning has never been so easy or enjoyable as it is now. Thanks Nick.
@Raviolitime15 күн бұрын
Are the fittings supposed to thread all the way down or do I need a wrench to make it go all the way down?
@gareffroque616315 күн бұрын
Hello, I really want the same setup for my garage it’s only for personal use and where can I purchase it please. If you have link for all of the parts would be much appreciated please L.
@flowinthrou16 күн бұрын
I use 1 backet for everything. I wash the car with multiple mitts, I wash the wheels in the end with 4 dedicated mitts and the wheel barrels with the water left in the backet while rinsing with this method. No dirty mitt or brush goes in the water. Only all of them go in the backet when I finish to go for laundry. One backet for everything is all it's needed
@Sk8trfreak0916 күн бұрын
So im assuming you can use this stuff on any color car but after those 2 products do you need to put anything else? Protective top coat? Or is that it, you should be good and it has hydrophobic properties?
@adamoc243117 күн бұрын
I love the bottles, but the downfall to these bottles is availability. Can't get them in Canada. Cost prohibitive when importing.
@T-BoneTodd19 күн бұрын
Will they be in the USA?
@hitek394320 күн бұрын
These are great! :D
@Dias-v20 күн бұрын
I have 2of this they nice but i prefer the ik ones bc they are 360 and they spray a lot like the pesol but for me I thing the ik is more steady and the 500ml i can use them in smaller areas but again personally both are great the best in industry
@KiranPatel-fk1pg19 күн бұрын
Can't compare the 2, I've never had an IK other than a foamer. But the canyon triggers which IK uses aren't great. They're a good dependable trigger but cannot be compared to a Pressol interns of ergonomics, spray pattern and of course the double action. Not to mention Pressol bottles look 10x better if that matters to you.
@RCdetails2036 күн бұрын
@@KiranPatel-fk1pgehhh, I have 4 pressols and 5 IKs, so far in less then 6 months I’ve had to put regular tolco sprayers on 2 of my pressols because the triggers stopped spraying correctly, I broke 1 of my IK triggers from it being cheap plastic but none have failed on me, plus I was able to buy a 5 pack of spare IK 360 triggers, as far as the actual bottles go the IK are a lot stronger, the pressol bottles will suction in like a water bottle when using them but do expand back to their shape, I have a few of the obsessed garage pressol labels and they look awesome just wish they were better quality
@KiranPatel-fk1pg5 күн бұрын
@@RCdetails203 I've never experienced the vacuum problem. I know they're not as durable interns of withstanding strong chemicals. My point is that the IK is simply a Canyon trigger that IK made a bottle for. Nothing special and many companies sell them. They're nothing special in any regard but they're a good workhorse. Personally I don't use strong chemicals in my Pressols and hence have had no issues. Its like comparing a Ferrari to a Toyota, ones bullet proof the other is problematic but don't drive the same at all. The comfort of the Pressol and the ability the double action trigger is what I prefer about them.
@AudaciousErin82Baby22 күн бұрын
Thank You for this solution. I especially appreciated how you explained everything and got to the point. Because I've been exposed to fumes for the past six months, Ive now developed and allergy to the air from the a.c. I've even installed a new filter to block out the fumes. Is there another way to block fumes? I welcome any insight that you may have. Thank You in advance🤗
@btbd278523 күн бұрын
How does this compare to the Wheel Foam?
@darndarn9925 күн бұрын
Totally off topic here but, i purchased your foam+ and used it yesterday and!!! WOW!! absolutely incredible!! 😍Also your drying aide and towels. TBH i thought the towels were going to be MEH but F**K !! those towels are magic! My wife was laughing at me when i opened it but she could not believe her eyes when i used it. Loyal customer right here.
@marktaylor957926 күн бұрын
I can't say I'd ever considered a tyre decon process, but now I have the T&R and I've seen this it'll be part of my next wash of our cars.👍
@ajackson-ross729528 күн бұрын
I like the chair for the pure fact it goes up and down shame it doesn’t have a tray underneath Like the stool lovely chairs though😊
@anthonybryantmedia29 күн бұрын
I've never wanted to sit on my arse as much as I do now. Great pieces of kit. I was going to ask if it can handle a fair bit of weight but youve answered that 😝
@YumCars29 күн бұрын
Me and you combined Ant, maybe a few others too!
@Coley66629 күн бұрын
Boss Lady has said I'll have to stick to using my bucket for now 😅 maybe one day though 😏
@YumCars29 күн бұрын
Trade the boss lady for the set of chairs. #problemsolvers
@chrispittock209929 күн бұрын
I’ve been waiting for you to release this, really like the look of the Robust Steel Max Chair. Yes they’re expensive but if you want quality it comes at a cost. Great bit of kit Nick 👌🏼
@YumCars29 күн бұрын
The robust steel max is a beauty that’s for sure! Yes they are the most expensive chairs for their category, however they will last a lifetime which makes them at the same time inexpensive
@chrisallen19129 күн бұрын
Cant keep my eyes off the cars in the background and how shiny they look 😮
@YumCars29 күн бұрын
They certainly do look glossy 😀
@chrisallen19129 күн бұрын
@@YumCars mint👌👏
@dave3805Ай бұрын
some of the links don't work anymore :(
@dep1001Ай бұрын
Nice one, Nick! Would you say I could just use Tar & Residue to clean my tires instead of using Undress? And then of course use Dress v2 as I always do. Cheers
@YumCarsАй бұрын
We wouldn’t not recommend this at all. This is a very rare treatment. Use Undress as normal please
@SupremeAuto-ShineАй бұрын
Thanks for this video Nick i'll be sure to give it a go 😀
@YumCarsАй бұрын
Let us know how you get on
@ilikechickensausages2075Ай бұрын
I bought mine straight from China $18 Not spending $45 AUD
@YumCarsАй бұрын
This is where the industry fails true manufacturers. Detail factory is made in house in the USA and China have the easy option of copying with even worse materials. Yet people will also say in open conversation support the “ real “ In our honest opinion, if we do not support home grown manufacturing then it will all be lost in favour of bad quality control and bad raw materials. We are proud to support the US and UK job market by aligning ourselves with the best western manufacturers.
@owensteele1645Ай бұрын
Hi Nick. Do you know if this tar and residue remover can remove this ugly, black, balancing weight residue that's stuck to the inner barrels of my beautiful new Volkswagen Polo's alloy wheels? I have nothing that can shift it, and I don't want to scratch the wheels.
@YumCarsАй бұрын
Yes it will. Here is a tip, soak a makeup pad with T&R and leave it to dwell for around 5 minutes, it will then wipe off with ease
@owensteele1645Ай бұрын
@@YumCars Thanks so much. Great idea. I will order some T&R right now!
@YumCarsАй бұрын
Thank you 🫶
@jamesclifford3222Ай бұрын
I was going to ask whether you clean the microfibres or not, but you've already answered that. great video as always.
@jaymistry9330Ай бұрын
great video nick. how much is that small.chair? looks comfortable and handy
@YumCarsАй бұрын
The full line of chairs will hopefully be launching on Friday so we will link you when it is live Keep your eyes out too on the KZbin video launch of them
@YumCars29 күн бұрын
Here you are yumcars.co.uk/product-category/by-brand/vyper/
@marktaylor9579Ай бұрын
I've got a Kranzle K10/122 and so I wonder what you use as the optimum PSI please NIck? I've got mine dialed down to 1,000psi which seems plenty. Thanks in advance👍
@YumCarsАй бұрын
How are you dialling down the PSI Mark? At the pump? Our wall setup is running around 800 PSI fully adjusted at the gun end
@marktaylor9579Ай бұрын
@@YumCars I'm usinng the unloader valve on the pump itself so I assume that's setting the pressure at the gun end. I hope that's right.
@YumCarsАй бұрын
No it’s not. By turning the unloader valve you are in effect reducing your flow rate A dedicated video will be dropping very soon on how to get the most flow at the lowest best PSI
@marktaylor9579Ай бұрын
@@YumCars Thanks for pointing this out Nick, I look forward to the video dropping soon so that I can get it right🙂.
@ShaunCymruDS8Ай бұрын
Seen some promos and thought I would give it a go and invested in 5L a few days ago. Have done two cars so far, one with a ceramic coat and one bare. One word .. Amazing! Yum Foam+ is truly a game changer, does exactly what is claimed and I can’t recommend it enough. I wish this company much success and will follow them/ products closely:)
@biiso8205Ай бұрын
Sir, I plan to polish my car using TW Polishing compound, Old can one. Can I use the normal foam applicator that comes with it? My car has mainly swirls, especially on bonnet area.
@darndarn99Ай бұрын
Rinse, Pre-wash with yum foam, Rinse, contact wash with yum wash, Rinse, finish with yum foam+, Rinse, spray with drying aid use one drying towel then finish with clean drying towel? is that correct ?
@darndarn99Ай бұрын
I'm a bit confused?? what are you using as the pre-wash? is that car shampoo or the foam+ ?
@gioNxs6Ай бұрын
Even using a one bucket method…it can be achieved if the process is correct. I apply tyre cleaner & wheel cleaner. While leaving the wheel cleaner to dwell I scrub the tyres then rinse off without any initial agitation. This does most of the heavy lifting, taking most of the grime off. I then apply more wheel cleaner if needed but more often than not I’ll just apply some pre wash and foam then go in with various wheel brushes and wheel mitt. I rinse any brushes & mitts before going back into the bucket. Last time I washed the car, after all four wheels were done, the water was pretty much clear apart from the odd bit of grit under the grit guard 😀👍
@YumCarsАй бұрын
This is a good method!
@gioNxs6Ай бұрын
@@YumCars I will add that the following comments are just my personal thoughts… When it comes to wheel cleaning, one thing I could never wrap my head around, if the wheel is extremely dirty, most folk will spray on their brand of choice regards a wheel cleaner, then after some dwell time, go straight in with their wheel brushes, mitts to agitate the dirt. This to me just means your taking all that extremely aggressive brake dust then brushing it and swirling it around your alloys. This just don’t sit right with me ( especially with my gloss black wheels ) so surely it makes more sense to rinse that initial cleaner off, hopefully taking the the bulk of or at very least the worst parts of the brake dust with it. If you then reapply some product and then go in for the agitation stage, surely that would minimise the chance of marking your alloys. I know nothing can always be full proof and sometimes things just happen…but is it just me that thinks this way or am I completely off the mark here…? Any feedback welcomed 😀👍
@ocshine.detailingАй бұрын
I’ve been doing this for 2 years I just used my common sense lol