THANK YOU! I tightened the bolts and BAM it stopped!

Worked like a charm! WD 40 is the universal answer❤😂

This is surprisingly well made

biggest garbage chair i ever had. the seat is tearing and the middle faom is showing like everywhere and that fro a price of almost 200 bucks

the normal wd 40 is not adequate to lubricate. its great for cleaning rust and lubricate in a hurry, but you ll need to reapply more often than normal. i recomend WD-40 Long Lasting Spray Grease

Thanks for your. WD-40, is not a lubricant, better to use something else that is engineered to lubricate.

i used cheap chairs before there is definately difference between high quality chair and cheap ones if you spend time on your computer like 1-3 hours a day go for cheap chair its ok but if you spend 7+ hours a day sitting on your computer you should definately buy a good quality chair.

I just got this chair even though this one is the first generation of the Kaiser I prefer this, because this is specifically built for taller and larger people. I have tried a lot of chairs in the past and none of them compare to the build quality and sturdiness of this chair. Built like a tank, and the heaviest one as well. I had a hard time carrying it to my room upstairs. Heavier means quality steel and parts are on it. I highly recommend this chair for big folks like me. I have been searching for a chair like this for a long time. Your review helped me on my decision. Thank you

Tightening the bolts worked! Thanks so much!!!

Quite a few bad reviews on Amazon when u filter. Quite a few complaints after a few months

cool upload. it works for me. much thanx!. - i used WD40 silicone spray.

I am Indian student i study nearly 14 hours a day but can't afford such costly chair and i suffer lot head and back pain I am way to give......

Isn't it amazing how many people are buying these typing of computer chairs, then after a while they develop this horrendous squeak!! Just look at the number of views and comments on this video! Surely this problem is well known to the manufacturers, I wonder if they are doing something about it, probably not. Just want the money for their very noisy chairs.

This video here is what u should do but do not use wd-40 (regular one), it has cleaning properties and not so much of lubrication. Use WD-40 Silicone spray. More expensive but it lubricates. And do not lubricate the gaslift with WD-40 (neither one). Use synthetic grease for that.

It worked great! Thanks buddy! Hopefully i will remember to tighten the screws in a few months. (I wont!) 😄

OMG ive been putting up with the squeaks for years when i could have just tightened the bolts, literally took me 30 seconds....

I'm wondering if when you lean back reclining not putting the back down but just the general reclining backwards sitting if it's really hard or if it reclines backs easy

Thank You!

Sunflower oil has a shelf life. You'll be sitting on rancid oil if you use that instead of WD40 or some other lubricant.

Thank you so much for this video cause not only My Chair got fixed 100%, But Also it became more smooth!

What if my squeaking is just coming from pressing the seat backwards and rocking back and forth?

🎉

Man this is so helpful thank you so so much

bro this shit needs more views.!! fixed my chair without the wd40 ... ive had this 300$ chair only two weeks so i was like every video is saying for old chairs.. mines is new and expensive... but yeah it literally was the same squeek u got from the first time u sat down on the video.. happened to be all 4 screws under the chair got loose in only a few weeks!.. wouldve never thought it was those screws cause i forsure tightened them as hard as possilbe when i assembled it.. its humbling but now i know to check the screws everytime i hear a noise!! no matter if new or not!! thanks helped me abunch

My friend says he fawks on this chair with no problems.

Good thing I finally started dieting and lost 25 lbs last month and am down to 220 now 😅 (not done yet, but at least I'm under 230 hahah)

everything i lift the back up, it goes back down, any advice?

i ve got to thank you man this video saved my sanity

Turning the thing over and tightening the screws worked... now im left here sitting thinking why the heck i didnt try doing that before i watched this video. Anyway, thanks!

Really good video of this aluminium stand

I unlocked a new fear a couple of weeks ago, gas spring chairs that can explode and kill you, don’t know what to buy now.

Holy hell this worked like magic!

Impulse bought this on sale today for 285. I'm more assured it's a good buy after watching the video thanks.

Holy shit! I was almost 100% sure I'd tightened all the bolts to the max. But I didn't! Thank you so much man. No squeking anymore :)

YIPEE

No deal. Bolts were tight, I installed them with thread tape when I assembled it so they won't be coming lose. The squeak is for sure coming from the cylinder but I oiled it thoroughly and I'd call it a 50% reduction in squeaks. This fn chair cost me an arm and a leg and has become the bane of my existence. I'd love to watch it burn in my backyard.

hi, whats the name of the dxracer chair in this video? thanks

Man you're the best. I tried so many things but this one was the solution. Thanks a lot.

Too bad you can't rock it enough forward to make the bottom surface horizontally level.

Andaseat Kaiser 3 had terrible squeak for me, got a replacement coming but they would only replace it till a coil started popping out and they said they could send me a charcoal mat but after I mentioned the 2 year warranty they decided to send me a new chair. They will really try and convince you there’s no issue. I appreciate them honoring the warranty in the end but honestly as expensive as it is I would say just go hermin Miller. I will say I did like the chair, but these things wear down after about a year of use.

Dude it's simple....if U are havier then X go to the GYM and take a cheaper chair 😷

Jesus christ... I bought WD 40 specialist with white lithium specifically designed for metal to metal connections. Just gave it a quick spray around where the cylinder contacts the base of the chair and the seat, flipped it back up a minute later and all the noise is completely gone. Thanks for the video, because the cylinder would be the last thing I'd try. I was going crazy tightening all the bolts.

Greetings from the future, and thanks for the video. Fixed me right up. In my case it was the metal piece that rotated when the chair moved backwards, creaking against what it was attached to.

Thanks for making it very clear that a pen mouse isn't suitable for drawing and handwriting. I was considering a pen mouse for just those purposes and now I know that what I really need is a stylus. 👍

Thank you SO MUCH!! I saw videos saying that I have to apply grease in the gas lift but never thought it could be the bolts!

I have had a absolute nightmare with this company after paying the most I ever have for a office chair I expected a ergonomic chair that does the job it states. I was so wrong. After purchasing this chair as soon as built it felt like it was tilting to one side. I got a spirit level and tried it on different floor surfaces but the chair was definitely unlevel. I reached out to the company who have sent 3 different parts to change on the chair which has led me to labour over rebuilding the chair multiple times but it still has the same issue! I also ended up with a bill from FedEx for them sending out replacement parts from China and not paying enough shipping. They recently sent me a new chair in exchange however this arrived with out the legs so is useless. I am now lumbered with a load of chair parts and 2 useless chairs which has not only caused me back pain but also are completely useless. Avoid this company. I will be getting my money back I am currently talking to consumer rights in the UK.

it's like you are fucking while using the computer lol

real alternative to mouse...keyboard... tab..tab...tab... enter... page up... page down.. arrow keys....esc.../// etc...

Anyone know how to fix a creak noise coming from the hinge cover, where the back connects to the seat.

Used cooking oil spray, it was all I needed. Now I need something to cover the smell