Repairing our cars previous Drag Racing sins is something I am all to familiar with unfortunately. " Present Nick" usually cusses out "Past Nick" on a daily basis while out working on my car. lol.. . It's going to be a stunner when you are done Ken!
@robertwilson440027 күн бұрын
Would have been nice to see the process of work being done.
@Tallguy511aАй бұрын
Where did you get foam and covers? Your driver seat frame is a CJ3A I believe, that was why is was different from passenger. Between 2A and 3A they notched out fender and made more room for front passengers
@kenshobby5191Ай бұрын
Thank you Nick! Just something to have hanging around, no projects yet just the Camaro but as you know the big block is going there😎
@RareratАй бұрын
Nice looking short block, are you just building it as a spare or do you have a new project?
@mcgyverinstituteofninjatech2 ай бұрын
Is this the engine that I bought from you a few months ago? I installed it in my 1966 Nova but I have not fired it up yet.
@Rarerat2 ай бұрын
It's going to be such an amazing car when you are done, I'm really looking forward to seeing your progress along the way.
@Rarerat3 ай бұрын
Very nice Ken, that will really be a nice set up in your 69.
@kenshobby51913 ай бұрын
Thank you Nick! Hopefully it does what I want, gives me a little passing power when I'm in the slow lane!😉
@nimeshvala17934 ай бұрын
Nice work 💪. For sale?
@kenshobby51914 ай бұрын
Sure. I would be willing to part with it for the right price
@ronnieroberts94784 ай бұрын
Excellent job
@kenshobby51914 ай бұрын
Thank you very much!
@kenshobby51914 ай бұрын
I do like it as well! Thank you Nick!
@Rarerat4 ай бұрын
Such a cool little Jeep, very nice job!
@camomanofcranham5 ай бұрын
love it....
@kenshobby51915 ай бұрын
Thank you Nick. I know I have enjoyed owning it and it sure does turn a lot of heads!
@Rarerat5 ай бұрын
Good luck with the sale Ken. It's a beautiful el Camino that anyone would be proud to own.
@justinbates46135 ай бұрын
Do you use any reducer? If so how much? I heard summit paints shoot better reduced 5%
@kenshobby51913 ай бұрын
Sorry for the late reply, I don't always get notifications from KZbin. I mix the paint according to Summits recommendation. I have and do use extra reducer on their 2k primer because it's so thick. Hope that helps and thanks for watching!
@kenshobby51913 ай бұрын
Just wanted to add that over the years I have learned to use fish eye eliminator all the time and I generally use a reducer for a hotter temperature then what I will be painting at. I have found for me using a activator for a hotter temperature keeps the paint wet longer and I generally get a better gloss. That's probably the reason I don't use extra reducer. Again hope this helps and thanks for watching and commenting. Please subscribe if you haven't already. Thank you
@louiea56566 ай бұрын
Useless video. Weren’t you supposed to show how to install?
@user-of1bq5tt1q6 ай бұрын
Nice!
@kenshobby51916 ай бұрын
Thank you!
@kenshobby51916 ай бұрын
Thank you Nick!
@Rarerat6 ай бұрын
Nice work!
@lowrider65367 ай бұрын
Man that engine will rev quickly very responsive with a lobe center of 102 and with that big dome on the piston WoW should have super torque
@kenshobby51917 ай бұрын
Thank you. Yes, I am hoping it should be a decent running motor. I appreciate you watching and commenting!
@kenshobby51917 ай бұрын
Thank you Nick! Fingers crossed!!
@Rarerat7 ай бұрын
Nice work, should be a monster in the 69. :)
7 ай бұрын
Unbelievable awesomeness 🙀🏝️👍🏼🤙🏽👍🏼🤙🏽🎶🎶🎶🕺🏻
@kenshobby51917 ай бұрын
Thank you!
@kenshobby51919 ай бұрын
😂 Thanks Nick!
@Rarerat9 ай бұрын
As Tony the Tiger would say... Looks Great!!
@douglasstevenson45149 ай бұрын
no help at all-I wanted to see the holes cut for the door and window handles and all the work to do the install-disappointing video.
@hubbcapp21099 ай бұрын
WHAT A WASTE OF TIME. HOW DO YOU NOT SHOW HOW TO INSTALL THE FELTS. WTF>
@kenshobby519110 ай бұрын
Thank you Nick!!
@Rarerat10 ай бұрын
Nice work!
@kenshobby519111 ай бұрын
Thank you Nick!
@Rarerat11 ай бұрын
Nice work!
@kenshobby5191 Жыл бұрын
Thank you Nick!
@rossilake218 Жыл бұрын
Ken, Three years later, How are the machines holding up? I see on the Web prices have increased. Where did you buy them from? I just found your channel and am interested in the jeep. Thanks, Ross
@kenshobby519111 ай бұрын
Hi Ross, sorry for the delayed response. for some reason Im not getting notifications. the machines are holding up well so far. i was keeping track of tire changes but stopped around 50, would guess I have close to 100 now. I bought the machines directly from Mayflower. I may be selling the Jeep in the future so I will keep you in mind. thanks, Ken
@Rarerat Жыл бұрын
Looks good!
@kenshobby5191 Жыл бұрын
Thanks Nick! Yeah, I can't wait to hear it come to life as well!
@Rarerat Жыл бұрын
Real nice looking set Ken, I'm anxious to hear how it runs.
@Mr.Phoreskin Жыл бұрын
Thank you! My daily is a 96 I30. She’s more reliable than anything else I’ve ever driven.
@allancarpenter384 Жыл бұрын
No disrespect intended Sir, but I would toss this video or cut off the first 4.40 minutes rather than having folks watch the whole thing twice do to a mistake. Other than that, you speak clear and make a decent video. Thank you Sorry thumbs down.
@kenshobby5191 Жыл бұрын
Thank you Nick! You still work your butt off my friend and are cranking out the projects I don't think you've slowed down at all.
@Rarerat Жыл бұрын
Looking really good Ken. I wish I had some of your energy, it's taking me forever to get anything done these days since I turned into a grumpy old man. lol..
@WesFosterHere Жыл бұрын
Hey Ken! Can you elaborate more on why you like to coat the trip down with wax before install? And do you recommend taping the outside bed at the trim line to avoid chipping the paint? Thanks.
@kenshobby519111 ай бұрын
I like to coat the molding with a little wax because I have found it makes it easier to get finger prints off. yes, I would recommend some tape around the work area for sure. sorry for the delayed response, I havent been getting notices.
@ghoulslyy6582 Жыл бұрын
What’s the torque specs on the manifold bolts
@kenshobby5191 Жыл бұрын
Thank you Nick! I was kind of proud of myself for the conversion.
@Rarerat Жыл бұрын
Darn nice work Ken, the horn looks great!
@witnesswitness4646 Жыл бұрын
you didnt show anything this video sucks
@americanpatriot5836 Жыл бұрын
Great video. Thank you and God bless!
@Rarerat Жыл бұрын
Nice bonus with that being a 4 bolt main, looks like a real nice block.
@kenshobby5191 Жыл бұрын
Thank you Nick! Yes, very happy to have found a 4 bolt main.