James, I think I did everything exactly how you did with the exception of putting the orange trigger wire from the voltage reducer on the front of the controller instead of connecting it under the dash. Everything comes on as it should, but when I press the accelerator nothing happens. it is a 2015 RXV. Any idea what I did wrong or need to do?

Does it pick up any speed by installing the eco

I really appreciate the video. I like to do these types of things, but I was a little intimated by all the equipment and wires. The battery bundle I purchased comes with minimal installation info for my Yamaha....or at least what i could locate. This video is extremely helpful. Thanks again for taking the time to put this together and post it.

Hi, 48v club cart president runs great on low speed but when depress the pedal fully it stalls could it be my MCOR or controller ?

The Level and the Bungee Cord made alignment measurements so much simpler, especially when you are trying to do it yourself. Great video. Appreciate the time you took to actually video replacing bolts etc. Thank you.

Fantastic video - your instruction is very easy to follow. If my cart already has a light kit, do I need to change the lights if I add the signal kit or should the lights I have work? All the plugs and wires you pointed out are on the cart already. Thanks JP

Hey Sir. Well done video. Question: what about the top while doing 80 mph. Can it blow off? I have an earlier e z go with the factory plastic top

Do you have any updates on this conversion from your customer? Was there any concern about protecting the charger from mud or dust?

Can you post a link to this system, please?

Just found your channel and starting bingeing your videos. Great stuff. Keep up the great work!

I actually jammed some plastic to take up the gap but will be using the fuel line. Got a brand new cart would only go 11mph. Did this trick and now at 19

muy bien lo felicito

Wondering the same question as a couple other people. What did you do with the gray wire going to the charge port? What is it for?

Thanks for the shoutout my friend. Good video.

So the special tool is basically a line wrench?

What voltage reducer did you buy

This is an excellent video!! You have showed how to align the front end. I just subscribed.Thank you!!

Where can I buy the short blocks for a club car DS?

I think that your directions were very good now I have to subscribe just figure how to do it and thank you

Aloha James, Awesome video. Just what I needed, I've been looking for a step by step detailed video for what I'm doing on my cart.

James. Is calling the number you have left in some of your videos the best way to all to you about parts??? Called the number a couple weeks ago and left a voicemail. Didn’t hear back. Figured you might have missed it.

I am curious if you would have had enough main cable length if you had chosen to install the battery on the driver side and put the charger on the passenger side. I like the idea of having the cart more weight balanced if you don't have a passenger, but I like the idea of not having to make a cable even more.

Another nice informant video.

Great explanation and example! This is exactly what we need to do. Will this work on a 2011 Precedent? We are right in West Columbia and need to get your help! Especially because you have a diagnostic tool and do such amazingly neat installations. Great job!

Nice video and very helpful thanks.

Do you happen to know manufacturers name of this lift.

I repair a fleet of carts. If it's slow like that, I shove a penny in the gap from above as a quick test, and if it fixes it, I use a metal bushing like your method.

Needed this video, thanks! What locktite do you recommend?

Is there a method to make sure the tires are point pretty straight before you do the toe? I know the old string trick but on my club car the rear end is wider than the front, Do you just eyeball it?

Glad to see you back, hope to see more videos soon.

Your install went great. Another KZbin channel I watch shows how to make these. They are super easy. I wanted a solution quick so I messaged the guy from that site you mentioned and he is a very poor quality business man..... Kinda a Ahole. No bearing on you whatsoever. You said it was just a random vendor. Basically responded with a one sentence response and told me to look at his Facebook page when I told him what cart I had and that I wanted to hear about any options he had available for it and pricing (which is what he said to do in one if his posts). I told him I had but all I see are pics and no pricing or package deals and no list of all that is available. (PLUS he said to message him for info and include cart type and wheel size). He just ignored me after that. It's a shame because I have more money than sense and would have bought everything he offered for my cart and referred the inevitable neighbors who wanted them to him as well..

Helped a lot today. Thx for vid.

Thanks for making the video. I will be doing this install in the next 6 months or so on the 2015 precedent I just got. Want to recover from the cart purchase and the Navitas AC kit first. And you are right, I still couldn't find another video talking about the install. Glad you made it.

What length cable did you use?

What brand kit is this?

It's been a while but I worked as a tech at a cart place for a bit some years ago. Carts would come in all the time with this kind of problem. Look around in the menus of the scanner, some where in there in them is a section that let's you adjust throttle position and percentage. I wish I could elaborate, but like I said, it's been some years. I'm a curious person so I had to play with everything I could find in the magic box 😆

My installer just wired up my new IQ harness to my Teekon Silver Wolf Controller. He sent me a video clip of in app calibration screen showing the slider moving erratically back and forwards with no throttle imput. Before sending me a text saying"I think your mcor might be bad". Its was a cheap non mcor to Mcor4 conversion. Just order an oem part made in mexico branded TW switchs. I hope this works. They've had my cart now going on three weeks for a simple connection request.

The other plug fits my tow / run switch (2000 DS), but the pigtail is so short they're no way to get close enough if that is what it's for...?

Where did u buy the kit??

How does a winch affect installation?

great video. I have a winch on my 15 Recoil iS. How does that affect installation?

Great video. Thank you very much for posting.

Just want to say that I tried this method on a 1995 Club Car DS. Worked out great. I must have fought with that motor for two hours. Two drops and the motor slid right off. Thanks for posting this.

My Amazon mcor 4 lasted 2 years it just took a complete dump today and it lived a very hard two years but the one before that lasted three months it's all just hit or miss

James is one of the BEST people on the internet to buy products from and get advice from. He is always there to help at any problems with golf carts!!!! Bless him.

@Kartz-n-Fartz - I liked and subscribed because of your great video here - thank you sir! If I understand, you're using a Curtis 1313 handheld diagnostic tool. Is there a sub-model suffix needed? I just acquired a used Club Car JE2112 cart and might consider spending the ($400?) if I can be sure I'm getting the right diagnostic tool. Thanks again for sharing your knowledge and enthusiasm!

This is the best video I've watched to do this conversion . I watched your video then I watched it step-by-step to do my 2013 CCP . I can't thank you enough

Where are you located? I need this done to the same model cart.

Why did the dash gauge stay lit after the switch was off?

Can you do a update on it