7 ай бұрын
Пікірлер
@Aramaidis-xx8bg 13 күн бұрын
Thank u sir I have a razor gokart and been having hell trying to get it running been dealing with that same clicking
@harisyoung4110 20 күн бұрын
Thank you for this video, its really helpful.. succesfully perform the expansion valve change and now my ac is normal and cool again.
@georgec7798 20 күн бұрын
@harisyoung4110 You're welcome. I know the video seems like you shouldn't be putting a metal bar near the window but if you're careful it works because that black plastic piece was so stuck I couldn't get it off any other way
@harisyoung4110 16 күн бұрын
@georgec7798 mine plastic piece are not that bad to remove, maybe because its already worn out for a 20+ years car.. previously sent it to a tech and they qoute me for a compressor repair which is quite expensive.. but after i do my own low and high pressure valve reading and a bit of research, i feel positive it just an expansion valve which is quite expensive if done by shop.. luckily find your step by step video.. now problem solved, my ac cool like brand new car.
@georgec7798 16 күн бұрын
@@harisyoung4110 That's good, it's always good when we can save money and do it yourself.
@JoeKeswick Ай бұрын
How did you get the cap to the dyer off?
@georgec7798 Ай бұрын
Hi, I really can't remember but I think the top just screws off
@brettthompson7787 2 ай бұрын
Awesome!!! Thanks for your help! My sons had the same issue and I Soldered the same wires and works as good as new. Made me a superdad!
@سالمملكاوي-خ2و 3 ай бұрын
I have the same problem, hot air coming in because of heater . Did you fix it yet? If you do please tell me what to do.
@amanchauhan8237 4 ай бұрын
Hi george... I'm from India... & I have Indian brand Car ( Tata) I saw your mercedes barometric sensor video.... I got 2 codes - P2226, P2229... Where u find barometric sensor in your mercedes car ?
@georgec7798 4 ай бұрын
@@amanchauhan8237 Hi, sorry for the late reply but I don't check KZbin that much. I'll have to look at the video again because I forgot where it is located. I'll get back to you as soon as possible.
@georgec7798 4 ай бұрын
@@amanchauhan8237 I couldn't find the video but if you can respond to me from that video page I'll look at the video.
@peterhansen8216 5 ай бұрын
see how many times you turn the shaft to turn the drum 1 time.
@georgec7798 5 ай бұрын
Hi, I did and it's about 90 to 94 times
@georgec7798 6 ай бұрын
Hi everyone, I just want to apologize for not answering or responding to your questions, I do not get alerted when someone answers or responds to my video so if you know how I can turn that on or get alerts please let me know because I don't want people thinking I'm ignoring them on purpose, especially when they're trying to help me. Thanks for all your help. Even to this day I did not find the problem why heat is coming out and I still have the heater core bypassed
@osvilego1440 6 ай бұрын
did you checked if the secondary pump should work in a sort of switch-on / switch-off mode and, for some reason, is always on?
@georgec7798 6 ай бұрын
@osvilego1440 That could be but I'm not sure how to test it. I did put the digital meter on the wires going to it while the car was hot but it didn't show a reading more than a few MA.
@huntingwithreds 6 ай бұрын
What is the belt size
@georgec7798 6 ай бұрын
Hi, sorry I guess I didn't put any numbers in the description I was kind of busy that day. Try pausing the video at 11:20 both the drive belt and deck belt are shown .
@georgec7798 7 ай бұрын
I just want to give everyone an update on this refrigerator repair / mod. It's been more than 3 months and the refrigerator is working perfect. I am 100% sure that the relay I installed will last 10 times longer than the original
@chrismitchell3577 10 ай бұрын
Mercedes Shhhmeraidese . High class piece of junk in my humble opinion.
@georgec7798 10 ай бұрын
Every car breaks down and has problems, don't forget this car has over $280,000 miles on it with the original engine and transmission that still runs great
@jeremyrojas8942 10 ай бұрын
When your at a stand still & twist the throttle and hear a click its supposed to do that, no ride the scooter give a couple push steps and twist the throttle it will engage the motor!
@georgec7798 10 ай бұрын
Yes normally when the scooter is working but mine was not working no matter how fast I pushed the scooter
@lamprossavvas1392 10 ай бұрын
Hi, thanks much for your differential rebuild videos, doing all the work for showing the entire process. I've learned a lot from it.
@lamprossavvas1392 10 ай бұрын
Good work! Thanks for doing all these videos, very informative and helpful 👍
@lamprossavvas1392 10 ай бұрын
The dryer is for keeping moisture and particles out of the a/c system by binding it. This prevents damage because of remaining moisture in the system, that can cause corrosion, quick oxidation of the compressor oil, all leading to excessive wear of other components like the compressor. The moisture can lead to icing of the expansion valve leading to declining cooling capability of the a/c. The dryer cartridge should be renewed from time to time because it has a maximum moisture binding capacity. It is strictly necessary to insert a brand new cartridge every time you open an a/c system, because the contact to the natural moisture of the outer environment leads of the instant saturation of the old dryer cartridge. After inserting a new one, the system has to be closed as fast as possible and filled up quickly with freon again, to prevent the new cartridge to be saturated and become useless in fulfilling its function. A drying cartridge isn't expensive.
@georgec7798 Жыл бұрын
It's funny sometimes in my videos I call this a transmission because it reminds me of a small manual transmission.
@phantasm9 Жыл бұрын
What is that small hose? My friends car doesnt have that small hose at all...just the 2 big hoses connected to the plastic firewall
@georgec7798 Жыл бұрын
Hi, are you talking about the small hose that is covered with the plastic covering that is located near the battery because it's not an actual hose, I think it's the battery cable but I forgot
@jayjennings-j4b Жыл бұрын
hypothetical wondering if you could wired /soldered another relay and essentially jumping the two with 3rd one to turn on off the two relays ?
@georgec7798 Жыл бұрын
Hi, this video is kind of old and I actually forgot what I did because I haven't viewed the video in a while. I think you're saying you want to use another relay as a switch instead of putting a jumper. Yes if you can fit the relay into the scooter then it should work but there would be a lot of wiring to do with positive and negative leads. If this is what you want to do, you can just put a toggle switch.
@jayjennings-j4b Жыл бұрын
@@georgec7798 i was just wondering if it was possible cause i have done that with computer on a van to figure out problems i was having .. the esc in this vid i had got working then it fried so i ordered a cheap newer esc to work with brushed and brushless motors seems to be best solution ..thanks for the reply and the vid id rather fix bypass stuff to make it work or preform better ... buying new is last resort i believe in you can do anything if u believe you can and practice fail and learn how not to do things ...so try and dont give up do research and prevail
@georgec7798 Жыл бұрын
@@jayjennings-j4b Yeah I know what you mean, I hate spending money when I don't have to
@TracyWolzfelt-pn8wg Жыл бұрын
Just got this 🛴 4 months ago
@BYT210 Жыл бұрын
Did you need to evacuate the system before you took it out?
@georgec7798 Жыл бұрын
Hi, sorry for the late reply but I don't get alerts and I don't go on KZbin that much. Yes you definitely need to evacuate the freon because there is a lot of pressure
@TheGMan. Жыл бұрын
Great video thank you
@aktherhoosensyed9110 Жыл бұрын
Are u certain it is the heater valve ,normally when your catalytic convertor on the exhaust is blocked then it gives off extreme heat somewhere near the center console just above the exhaust
@karlschwab6437 Жыл бұрын
Must be kick-started!
@Noor3368 Жыл бұрын
thanks for video
@matthewcowart6713 Жыл бұрын
I have this green one also I want to have no push off how do I eliminate that
@georgec7798 Жыл бұрын
Hi, sorry for the late reply but I don't get alerts for this KZbin. If you follow the instructions you could eliminate having to push the scooter.
@mechatron2775 Жыл бұрын
good job
@JonahNAloha 2 жыл бұрын
All I did was over volt with a 36v battery. Maybe it will work for you
@JonahNAloha 2 жыл бұрын
All I did was over volt the system, try a 36v battery.
@jurez8752 2 жыл бұрын
very good tip George , I did the rework with a soldered jumper wire and it worked very well. The brake motor disable feature still works ! OTOH , the kick-start requirement is no longer available.
@georgec7798 Жыл бұрын
Interesting.
@hectorestrada6048 2 жыл бұрын
Video is too long and sounds like he's not sure. Way too confusing.
@amberadkins3266 2 жыл бұрын
Do u still have the car ?
@gamerepair2020 2 жыл бұрын
Yes
@samkey599 2 жыл бұрын
What waz the problem of the AC?
@georgec7798 2 жыл бұрын
Hi, sorry for the very late reply I have this KZbin account on an old phone. The problem was the AC was not blowing cold
@samkey599 2 жыл бұрын
@@georgec7798 ok, thanks
@wilsonk 2 жыл бұрын
Nice sharing my friend.. watching from Malaysia
@sohypnodiq 2 жыл бұрын
Thank you so much for sharing this helpful vid. My neighbor put a razor moped to scrap pile and I decided to attempt to salvage it. I bridged the relay as you demonstrated and wowla
@billywaynehuggins8567 2 жыл бұрын
You had the exact same thoughts I had why in the hell run on the back side of the belt but thank you your info helped
@tserevenad 2 жыл бұрын
congrats on figuring this out. It has been a couple years, so is it still all working well at 39 degrees? So my real question is did you ever develop a theory as to why the control valve AND the relay failed? I am wondering if you had a current spike via a shorted battery/alternator/starter wire/lug incident. In simple terms what took out the control valve and relay?
@MadCrafted 2 жыл бұрын
E150 model most likely I have the same one.
@samueltalampas8060 2 жыл бұрын
Hi sir. I have the same issue in my razor scooter I have clicking sound as well so it means I need to change only the relay?
@bikerboysrus1 2 жыл бұрын
this is not the safe way, this is the best way to teach someone how to start a fire. most people don't understand what gauge wire to use. bypassing the relay will and is giving more amperage to the motor and straining the batteries, causing them both to fail quickly if the wire doesn't melt itself thru the plastic. the SAFE ways are to either by the 10$ speed controller new or desolder the relays and put new ones in. they cost 5$ if you use the pins this guy shows you to solder a wire in and bypass them, your soldering the wrong pins and also taking the long way around a simple fix. so much fail in one video but at least you were trying to help people
@jasonpang531 2 жыл бұрын
What is the root caused for this problem?
@OHydroTsunamiO 2 жыл бұрын
Dude corrected himself saying "sucks" 💀
@rollyguiling858 2 жыл бұрын
I bought a new controller but the motor still not working, I test the cable going to motor and it is zero reading, battery is fully charged 25.6V, there's click when I turn on the throttle but no power going to motor, I also checked the brake and it's fine, I already feed up, why there's no power going to motor?
@georgec7798 2 жыл бұрын
Hi, you probably have to kick-start it or you can jump the relay like in the video. In other words, you have to kick-start it like a skateboard and then turn the throttle as it's moving
@NCXitlali 2 ай бұрын
@@georgec7798 I heard about that. I actually replaced the controller with a new one and it still gave me that clicking noise. I got fed up lol
@thewoodbooger583 2 жыл бұрын
Thank you. Worked like a charm!
@mustaphaattebaa6714 2 жыл бұрын
Hi,thank you very much with your video i repair my bicycle Razor E100.good job
@1_800_iFarted 2 жыл бұрын
Will try this solution thanks.
@ravimoodley7058 2 жыл бұрын
What is part number of control valve
@georgec7798 2 жыл бұрын
You can't go by the part number on the solenoid, you have to go by the number on the compressor which is shown in the video
@cantgetright_24_7 3 жыл бұрын
Finally a video that'll just tell me how to get it working without telling me to buy all these parts and do all this testing. Exactly what I was looking for! Thank you!
@toppervikingo 2 жыл бұрын
100% right. I love when people take there time to explain what they think, according to many years experience and skills, how to fix a problem. Yes let us get more like that. George C videos are great:-) Every boddy can buy a new one - but that is not fun. Thank you George C:-)
@mntrout400 3 жыл бұрын
do you have any idea why my same car would still blow ac when I turn the heat on?
@tannerpatterson2118 3 жыл бұрын
E175
@DylanL69 3 жыл бұрын
60 bux ain't shit for a sensor and 55° is a good a.c. temp that's pretty fucking cold