I just purged the air out finally on my 03 z. Changed the thermistat and i watched all youtube videos and they all say its a real bitch..It was man,i tried jacking front up,i tried parkingbin a steep hill and let it run and just open the rear air bleeder..still would not get heat ..its 90 out and its blowung cold air with heat on,then after about 2,3 days with no heat i didnt drive ot very far from my house cause im pretty sure it would overheat..So i did the whole purge dance for like 2 weeks daily opening the radiator inly its full,the overfill tank seems to be working a little bit,Then i ordered a non spill funnel for 40bucks on amazon,OEM brand,green colored plastic I followed the way it shows how to do it,but thiers no real directions and ive never used something like this. It wasnt working!!! It kept spitting the fluid out the funnell,it overfilled the funnell and shot afreeze all over my motor n bay area..I did this for 3 days and by Accident ,i was unscrewing the rear bleeder and it was all air,no afreeze inside the hose with the bleeder,so i removed the screw totally,i was going to add afreeze rt into the hole where the bleeder screw was.all of a sudden bigbrush of fluid shot every where and it was too hot to put my bare hand in the afreeze to put the screw back before all my afreeze would be on the floor,I forced myself to take the pain of boiling my fingers in hot afreeze fluid act of god happend the screw went rt in without a problem beautiful...i was soo happy to get it back on n save my fluid...so with the help of the non drip funnell all hooked up it fixed itself with at gush of afreez,e loss, mustve fixed it by accident Ill take it....

This one here is for your airbag.. POW!!!!!

Why did you have to replace the coolant bleeding valve?

Beautiful build!

Best looking 👀 Z bro 😎 💯💯🔥🔥🔥🏆🏆🏆🫡🫡🫡✌🏾✌🏾👍🏾👍🏾

Great vid no one was showing how to take center console out

Thank you mate, exactly what I was looking for 👍🏼🤝🏼

Thanks!

Clean and simply that's how I want got 2007 convertible love it

Exactly thats why i chose the platform. Havent looked back since. Bought mine with 32k on the clock. 9 years ago. Only has 85k on motor❤. Your car looks great buddy.

I just replaced my radiator do i have to refill while car is in the on position or do i do it in a gradual manor adding coolant as i go taking time ro lwt the car temperature cool ...&also the bleeder valve do i burp my g35 using this metod during the car running ...& How would i know i need a thermastat?

if ur replacing ur carpet, cut it out around the center console… when it comes time to putting it back on just remove the few screws to ur center console to have it enough to lift up and slide under. U don’t have to take out the pedal either. The carpet is pretty bendy . Flat head helps

I barley filled the funnel like you said, when the car runs the funnel almost fills the entire way before I’m done with the rev process, coolant temp gets to like right at 200 before I’m done and I shut the car off, why does mine rise so much compared to yours, car is jacked up and I did the bleeder port process before starting, installed a brand new thermostat before the job so I’m stumped honestly. Any help please

Great video mate

Yo! That right hand drive roadster is what I wanna talk about 🔥

What a car and the colour is my personal favourite for the 350 great work 👌

You need to redo your video again, too. You’re all over the place, and shaky hands, hard to see.

i have 06, i thought it came with the hr engine.

very helpful! thank you!

You have the bleeder port? Lot of times people do a delete on the bleeder port because they tend to break

the ker

Really, THE CLEANEST 350Z I have seen in years..!!! Kudos to you bro!

this is exactly what I was looking for, thank you for making this

Thanks for the vid! This'll be perfect for my Koyorad, stock fans and Vortech setup! I love your belt setup, how did you get that together? I'm hoping to reach 500 whp with my Vortech and E85 so I'm going to need to eliminate any risk of belt slip as far as I can.

The bleed through is normal for silicone unfortunately, I've researched it quite a bit. Happened to me and many others I've seen, they also smell when the car is running, because of that since I'm now installing the same radiator I'm going back to stock hoses.

Love the car

Even though Subarus are absolute shit to begin with, I really can't fathom how someone could survive enough head trauma to allow themselves to think this car is nice. I could mold a sculpture of a car with my shit that would look better than this. Fuck, if there was a way to style this car with an influence of a Pontiac aztek, it would've looked better. Happy wrx and STI are done and this is likely the last WRX.

Would be a better looking car if it fell off a cliff.

Bunch of Tims cups there eh? The orange looks so good, I love the wheels on it!

NOICEEE you're a babe !

You posted a picture of this car in the 22' rex subreddit, didn't you? The setup + plywood garage looks familiar as fuck lol

Sorry its off topic, but where are you from? Your accent seems to go between Irish, Canadian and some sort of general American sounding thing at times lol - Im from Northern Ireland so not too used to accents from overseas haha! (just on topic - that orange is a colour that looks better the more I see of it, its a nice choice on the new chassis)

Looks right some good. Pro tip: Foam a dry car, not a wet one.

Your GR chasis is still the best looking by far. I love those GR chasis, wide flared fenders, smaller sportier roof line, nice aero components on the side of the bumper, seats are nice, interior more sportier feeling.

What size is the k&n ?cant find one

Same and then i see it in black. Had to have it

Hi, What model is that WRX, I can not find rear heated seats offered on any trim?

How do u spray paint that good and removing the pre filter void warranty?

Honestly I didn't like these when they came out, but seeing yours in orange, and seeing a blue on here in Bay Roberts totally changed my opinion on the new WRX. Grill looks mint 👌

looking good buddy! Fellow NFLDer and Orange WRX Owner!

coolant started rising instead of slowly decreading whilst car was at idle, any tips?

Should’ve been like that factory.

Why you parting out the beautiful 2012 sti

Where did you get the lip for the Mazda 3 I got a 21 turbo 3 hatch and was trying go find one

nice rigs bud for sure.. ill trade ya the armrest cupholders out of my 22 brz ;)

wicked man cant wait to see this car out on the streets !

Yea I've been waiting for this vid! Hello from so Cal, I don't have passenger seat and I lowered head Rest on back row so I could get more window since I lowered my driver seat since I'm over 6 f. Stolen a few times few donuts and buurnhas thrownbrthe body out sync and same with electrical given I'm sure two kill switches involved and trunk lock has different lock also.my computer has two passwords set up but not for me the owner so I'm thinking car shop placed dtheir system because things need fixing everyb3 months and I called him out and he lies so I show proof with his own sign for the warranty and makes up new sensor and wants to hit me lol. I watch threm the whole time (30 mins)after they said 3 hours pfft. Piece is set but not compute,figures. I think they swapped my car because I got a new hood and tires with back breaks ( donuts) skirts scratched up and trunk cord for inside pull is gone and buttons don't have effect. Are going to do a behind n under dash? Or whole car? Lol I'm cleaning all mine out and going to hand window and seat trying to get as much electrical out as I mod Ferrari replica all black with slim trim line tron effect inside the gaps nothing crazy. Once I have the lazy boy seat I'll make video!!

Have u changed the convertible top on your Z and if u have how I need all the help I can get tried doing mine got it off but can’t get the new one on I’m panicking bad all help is appreciated

I was super excited for this but I think because I don't have the revup I have a belt where your charge pipe is lol.

I like your kerrrr hahahahah trying to build my roadster