Eventually the lamp will get dirty and the aluminum will oxidize. Since you sealed with glue it will be very hard to clean or replace the lamp. How do you propose to solve those problems?
@Senan-nn7yr Жыл бұрын
Bruh
@itoldutruth669 Жыл бұрын
0:41 I am just asking how u can connect it to the sun ????
@budmanzoom44412 жыл бұрын
Nice presentation on UV light and how to use it on water purification.
@babylonfive4 жыл бұрын
For those who might be looking to duplicate this, an all metal solution might be better.
@bradpatterson34724 жыл бұрын
I tried it, didn't work....
@The_Happy_Aviation_Enthusiast3 жыл бұрын
Don’t forget about generator safety as well kzbin.info/www/bejne/f2LNhWZ3g6qBrKs remember that portable generators can be dangerous if not used carefully. Just reminding everyone to be careful using portable generators. Thank you
@cillitbangbarry51614 жыл бұрын
I have no clue about voltage or wattage or power at all, apart from grabbing hold of live and neutral is something I’ll only do once That said I’m taking from this I could trickle charge my car’s battery with a reasonably large solar panel. Am I correct?
@federicobacher4 жыл бұрын
Nice! I did a similar one, but in order the water not to contact the lamp i did a PVC cristal hose. But I am not sure if UV light reacts with this tubing. Because the water now has excessive plastic taste... any advice? Thanks
@fradaja4 жыл бұрын
Interesting
@CristinLive4 жыл бұрын
When I tried to find these beads it says they only detect uv light where did you find yours?
@pritongkandule58354 жыл бұрын
What is the best type of glass to use in a UVC cabinet door? Thanks
@BobDiaz1234 жыл бұрын
I noticed you have no protection from the UV-C light. A short exposure can be tolerated, BUT as the time of exposure increases, you risk getting a very bad sunburn (plus skin cancer) and damaging your eyes. Thick gloves, heavy clothing, and protective eye wear should be used when walking with UV-C.
@helmuttdvm4 жыл бұрын
I’d love to know where to find those beads or other inexpensive way to detect UVC.
@olivertiongco28504 жыл бұрын
Great idea! How things going? --- hahaha...
@stefanc40604 жыл бұрын
Very interesting, but you don't know for sure the wavelenght of your chinese UVC-Light or did you check it with a UV-meter? Maybe its only mostly 300nm and not 220nm. These cheap beads are only sensible from 300nm up. So I think you never tested light below 290nm. But anyway thanks for your experiment
@dfgriggs4 жыл бұрын
Low pressure mercury tubes by nature will have a strong emission line at 254 nanometers. LEDs are another story altogether
@dennnis64164 жыл бұрын
Thanks to your video was able to spot fake chinese uvc wand
@jacare004 жыл бұрын
Thank you for the information. UV light must be used to disinfect objects in common life since now, this experiment shows how to detect the UV presence. Nice information. May be soon we have an article about it. Please write back if you want to colaborate.
Can't get past the glass and the plastic? So how do you get out of the lamp that is glass or the LEDs that are plastic?
@dfgriggs4 жыл бұрын
Plastic-topped LEDs claiming to be UVC are pretty much a scam I think. There are some LEDs with quartz windows that are a bit pricey but that do emit UVC.
@lonagermanotta4 жыл бұрын
Can you UVA pass throw black clothes ?
@leozendo35004 жыл бұрын
The aluminum may be an issue but great setup
@danpham88064 жыл бұрын
Thanks for video. one point I would like to point out when you turn on light, in order to get maximum output UVC, it need to have complete warm up for the bulb which about 5 minutes otherwise you will get about 70% output of UVC.
@michaelisaacson97354 жыл бұрын
254.4nm.
@wildfireman134 жыл бұрын
Corona killer
@notetivanobisukae23654 жыл бұрын
UVC only ?
@wildfireman134 жыл бұрын
@@notetivanobisukae2365 Yes
@Nelson_Nicholson4 жыл бұрын
UV-C 254nm kills corona. But most of the lights are knock offs from China
@dfgriggs4 жыл бұрын
@@Nelson_Nicholson the LED devices claiming to be UVC are generally a scam, and a very dangerous scam at that
@fmartin28214 жыл бұрын
If UV-C/B doesn’t pass through glass or plastic, how do those wavelengths escape the glass shell of the actual bulb? Serious question - not trying to be a smart-A.
@gfanguy4 жыл бұрын
It does pass through quartz glass
@Dragon90815a4 жыл бұрын
Uvc will travel through quartz
@ytrew97174 жыл бұрын
interesting, did it work? Was the epoxy sealing tough enough to deal with the heat? Don't the rays decrease significantly with temperature of the lamp?
@ytrew97174 жыл бұрын
where can we find those beads (I'l looking for a way to detect UVC)?
@philoso3774 жыл бұрын
ytrew Try eBay this search word: UV beads. Good luck.
@gfanguy4 жыл бұрын
Amazon
@MARKYMARKSSPIDERSNBUGS3 жыл бұрын
Green bananas turn brown if exposed to uvc. Takes a couple of hours after exposure to turn. I put one in a glass jug and the half that was inside the jug stayed green.
@christopherweston60285 жыл бұрын
UV-c breaks down PVC adding micro plastics to the water supply.
@Donnwestt5 жыл бұрын
I did this on mines and it works only as long as i keep the drill going, the "field" does not stay "flashed" when i let go of the trigger or restart generator again. i don't want to have to do this every time.....
@The_Happy_Aviation_Enthusiast3 жыл бұрын
Everyone should also be aware with the safety of using generators kzbin.info/www/bejne/f2LNhWZ3g6qBrKs please remember that portable generators can be dangerous if not used carefully. Just reminding everyone about generator safety. Thank you.
@steenmortensen64105 жыл бұрын
Its not all correct. UVC does go Through SiO2 Glass, but not through as you said Windows glass-- In my opinion it could be the reason why Earth (and edge of Ice) is Warming up-
@ashyslashy58185 жыл бұрын
ice age libtard.stop listening to little girls.
@saulg1955 жыл бұрын
Why not just use regular solar lights or spotlights? Thinking of doing mine, but I don't want my kids near any voltage. btw do you have a pic for the setup or anything? Thanks
@jasperbato60376 жыл бұрын
how can i know if my uv light emits uvc light?
@philoso3774 жыл бұрын
Try eBay with this search word: UV beads. Good luck.
@Puma1Sunfire16 жыл бұрын
VERY NICE!!! Did your idea work out or did you need to do differently. Would love to know as i plan to build something similar with the main difference being my UVC sterilizer is already encased and sealed within a glass/quartz tube and i plan on using a uni seal where you used epoxy to seal the bulb in place.
@yumann4 жыл бұрын
How did it go?
@fratermus55026 жыл бұрын
Voltage isn't a particularly good way to measure panel yield, since panel voltage is relative stable above 20% insolation. Watts *would* be a good way to measure yield, but there was no load on the wattmeter so only Voc was being measured.
@3dvisiongamer2136 жыл бұрын
And did it work? I am thinking of doing the same.
@paulrobillard93936 жыл бұрын
Tried this and it worked perfectly ! Thanks for the tip.
@The_Happy_Aviation_Enthusiast3 жыл бұрын
Don’t forget about generator safety as well kzbin.info/www/bejne/f2LNhWZ3g6qBrKs
@vetalturlin15947 жыл бұрын
If you want to make it too just use InpliX handbooks.
@squalllaw88307 жыл бұрын
May I ask that is this completely safe lloking at the UVC bulb through general glass?
@chenelson1857 жыл бұрын
what makes you think the tape is going to stay , or the glue is going to get on the bulb ?
@evgenmozolevski2817 жыл бұрын
Check Inplix if you'd like to build it yourself :)
@lastfirst42467 жыл бұрын
whats the best light for killing fungus/spores??.. these athlete foot meds are bullshit...
@bubba990096 жыл бұрын
Probably wouldn't want to use this on your feet since its function is to destroy organic matter. The shorter wavelength UVC lamps also generate ozone which does more of the same thing.
@lyndonowen60647 жыл бұрын
Very good explanation I now have a better understanding but the sun simulator has altered the spectrum by the use of led/xenon and mrmmb333 has illustrated around USA the levels of all.....scarey
@offgridozman55147 жыл бұрын
great video but just to clarify, it has been recently discovered that UVC is now reaching the surface thanks to HAARP and the geo engineering projects.
@steenmortensen64105 жыл бұрын
Thanks to the Depleted Ozone layer ---
@trent30675 жыл бұрын
All because of nuclear
@philoso3774 жыл бұрын
Mark Summers uVC of 254nm wavelength also breaks down low altitude ozone O3 back to oxygen O2, isn’t harmful other than eye injuries if prolonged exposure to uVC. The portion of sun’s uV spectrum ie vacuum-uV of 100 to 200nm can convert O2 into O3 ozone. In that sense, our solar recycle O2 <> O3 back and forth, 24-7 in the upper atmosphere. Something up there affecting V-uV concentration also contributes ozone depletion. Lastly, our sun can contribute uV spectral variance over time ie V-uV : uVC intensity ratio.
@bruceforster17569 жыл бұрын
Your wiring setup is a FIRE WAITING TO HAPPEN!
@dubinatub110 жыл бұрын
can anyone advise on off grid AA battery charger for this unit.I have a 3 month challenge and need AA and AAA charged up in Desert so plenty of sun.
@dubinatub19 жыл бұрын
many thanks
@kd5you16 жыл бұрын
I guess its too late to recommend this, but Goal Zero makes a AA battery charger that charges off of a USB port. Just add a cigarette lighter to USB charger to feed USB to the battery charger. If you need AAA batteries the Goal Zero AAAs come with an adapter to make them fit inside their battery charger.
@paulsharp7411 жыл бұрын
don't buy solar panels prior to watching this crazy video. google "Mike lewis diy solar" and see for yourself
@bradleykempton696811 жыл бұрын
don't purchase solar panels prior to seeing this insane presentation. google "mike lewis diy solar"
@andrewgarcia831611 жыл бұрын
do not buy solar panels prior to seeing this amazing video. google "Mike Lewis diy solar" and see for yourself