We sell the 90+ amps alternators separately, we don't have them in a kit. dansperformanceparts.com/empi-90-amp-alternator-black/ dansperformanceparts.com/empi-chrome-90-amp-alternator/ We do sell a 75 amp kit, dansperformanceparts.com/chrome-alternator-kit-with-chrome-parts/
@russellfoote24708 ай бұрын
price and availability in canada
@dansperformanceparts8 ай бұрын
Sorry, we don't ship the beams to Canada.
@nicklawson88689 ай бұрын
I’ve looked on your website the bumper is not on there
@dansperformanceparts9 ай бұрын
We are temporarily out of the bumpers. We should have them back in stock by the end of the year.
@CallMeXTRA9 ай бұрын
is there a version available catered to Baja Bugs? It would be nice to be able to get one that has the wider beam, adjustable and lifted spindles...
@dansperformanceparts9 ай бұрын
We have front suspension kit available for Baja's on our site dansperformanceparts.com/vw-front-and-rear-suspension-kits/?filter_suspension-type=front
@CallMeXTRA9 ай бұрын
@@dansperformanceparts AWESOME, THANK YOU FOR THE LINK...
@chipdunham14810 ай бұрын
Cool 😎 2023
@DannyMostarac10 ай бұрын
Nice nice nice
@dansperformanceparts10 ай бұрын
Thanks
@capitansuarez323110 ай бұрын
You just sold me. What a great looking Kit 🤟🏼🔥
@jimmywilkinson919010 ай бұрын
On GM cars they went to HEI to get rid of points floating because of shaft bushing wear . this looks like a good product .
@kolakduren315910 ай бұрын
How many hp this ?
@dansperformanceparts10 ай бұрын
These engines have stock components so should be the same as the original engines. You will get a little more HP out of the 1776 and 1914cc but it will still be determined by the carburetors and exhaust you run.
@user-rh2zs6ex2c11 ай бұрын
where can I buy front A arms to transform my buggy from beam to A-Arm?
@dansperformanceparts11 ай бұрын
You could try a-arm.com . I believe Allen is still making bolt-on kits to convert to a arm.
@superteacherk11 ай бұрын
Hi, can I use those calipers for an empi kit 22-2905-0? Thanks
@dansperformanceparts11 ай бұрын
Unfortunately, we do not sell those calipers separately. The supplier will not split them from their kits.
@manolorangel8410 ай бұрын
Can you send the calipers separately?
@dansperformanceparts10 ай бұрын
Sorry, we can't get the rear Wilwood calipers separately from Empi
@beefsoda111 ай бұрын
I would like one some day.
@AntonioMartinez-iv3iq Жыл бұрын
1600 price
@dansperformanceparts Жыл бұрын
All the links are in the description that will take you to our web site and you can find the prices there.
@jockellis11 ай бұрын
Any Type 4 stuff for 914s?
@dansperformanceparts9 ай бұрын
Sorry, only type 1 & 3
@ovalwingnut Жыл бұрын
Aluminum preferred for performance applications but it's always nice to see original materials. Good job
@DougsX5 Жыл бұрын
Great information Dan! Thank you!!!
@dansperformanceparts Жыл бұрын
Glad it was helpful!
@TBR_LLC Жыл бұрын
60 degree work on tractor pto for bush hog?
@dansperformanceparts Жыл бұрын
Sorry, these u-joints are for steering or lite duty only.
@westcoastracer1 Жыл бұрын
Do you have a picture of one installed?
@dansperformanceparts Жыл бұрын
We do, If you send an us a email, I can send you some pic's [email protected]
@mschaper53 Жыл бұрын
Hey Dan - It's been a long time since I first set you up as an EMPI distributor. It was controversial at the time because you were the first online-only distributor with no storefront. I believe it was very late nineties or 2000 when you started. You have obviously been a great success so congratulations are well deserved! Mike
@dansperformanceparts Жыл бұрын
Hi Mike, Yes, It has been a awhile. How have you been?
Dan do you have dropped kombi spindles with 0offset
@dansperformanceparts Жыл бұрын
I can get 1968 - 1979 2" drop spindle however they are not on our web site at this time.
@carlandrews3475 Жыл бұрын
Does this company still exist
@dansperformanceparts Жыл бұрын
We sure do dansperformanceparts.com/
@mykwilwin2 жыл бұрын
Hi, do you know the weight of this body
@dansparts2 жыл бұрын
It's around 160lbs
@drd19243 жыл бұрын
Sounds real nice!
@sicsempertyrannis88303 жыл бұрын
I have 930s on my 500hp ls sand rail and want to upgrade to 934s what all would that Intel is it just swapping the cv's and shafts or is there more to it
@russellp19823 жыл бұрын
Lot more to it you need to change the Trans side plates and the drive axles and the 934 are double the price
@Divocwax3 жыл бұрын
Yes! No black grease to make it impossible to see what's happening, or to make me wish I had not started the job. Why do so many DIY people not bother to get rid of all grease before attempting to explain cv's ? Some of these people look like they work in a coal mine - even before the start the job. Show pride in work!
@jhh86883 жыл бұрын
if you did this for aliving then you could understand eating a sandwich while working with the other grease doesnt kill but it sure as hell shows a working man from a wanna be
@gabakusa3 жыл бұрын
can i add a gooseneck ? to put it under my box truck
@teamnumbskull28463 жыл бұрын
Do you build custom fiberglass bodys? Also would you have any closed can Manx body's
@OCofthe33 жыл бұрын
Thanks for taking the time to do this. Information on these racks are really hard to find. It would be really great if you could do and overview of the other racks you sell as well. Do you have any racks that have more than 3.5" of travel?
@aarondavis55354 жыл бұрын
I was told you don't need the axel clips at the end if you have race axles so how many degrees do you get from this. And I want some 944 cv's
@RodderFiles4 жыл бұрын
do they make a unit for super beetle or early for street use?
@DolittleMccoy5 жыл бұрын
Im working on a project of turning an atv 4 wheeler into a side by side... I wanting to mount one of these infront of the driver side and only use one side of the rack tie rod and attach it to my old steering shaft where the handlebars use to be. Or is that to much pressure on one tie rod to push and pull the old steering shaft? If i were to mount this correctly, down low and in the center of my project using both ends hooked to my wheels. What stops the wheels from cutting to sharp? My original steering shaft has stops on it, thats the only reason i was going to cheat and hook one end of it up high and to to my handlebar shaft.. Any info will be greatly appreciated
@fatboyR65 жыл бұрын
I'm building a buggy. The shifter is way forward to the drivers seat. It needs to come way back. Can I use this box and CUT that factory rod that goes to trans? Or do I need a new Rod?
@adamUDavies5 жыл бұрын
I cut the rod in mine , shifter working great. I would highly recommend it.
@SwingStateStories5 жыл бұрын
Thanks this is great
@enriquelodela635 жыл бұрын
I own that green limited buggy, I'm from Mexico, still running great
@RotaruCosminLeonard5 жыл бұрын
How do you make it for the one with a tripod on a side and 6 balls on the other side? I need to align them on my a3 2005
@israeldemandel35676 жыл бұрын
Could you connect the spline side of the joint directly to the rack and pinion or do you need another part like a coupling for that?
@dansperformanceparts6 жыл бұрын
Yes, the u-joint could be used that way.
@ProfessorTime6 жыл бұрын
Aluminum??? Shouldn't tie rod sleeves be steel??? Aluminum sounds a little weak to me. I'd be afraid they would bend going over a curb, etc.
@dansperformanceparts6 жыл бұрын
These are made for off-road ues and design to bend if you hit a rock or have a crash, to save the rack and pinion or steering box, however they are evry strong and it's the only tie rod we ues in our off-road race cars.
@yelyab15 жыл бұрын
@@dansperformanceparts Aluminum comes in many strengths. A 5056 T6 has a yield strength of about 35,000psi to 50,000psi which is about the same as SAE 1010 steel. Tie rods are not usually high strength steels. I don't work for Dan's. I'm a really old, pre communist, metric system, stress analyst from Fordza down by the Rouge (raw material in, finished products out and enough air pollution to choke a horse) in Dearborn, MI.
@scottrens52836 жыл бұрын
Got one i love it
@scottrens52836 жыл бұрын
I have one on my Dune buggy i love it
@johnturpin88266 жыл бұрын
Scott Rens How hard is it to install? Any information would be appreciated. Thanks
@dansperformanceparts6 жыл бұрын
The shifter box is made to be welded to 1-1/2" tubing. Then the rest of the installation is the same as a stock VW.
@carlosz72086 жыл бұрын
Is this something that one would want to do on a VW bus with stock suspension?
@dansperformanceparts6 жыл бұрын
With stock suspension it's not so critical.
@patrolrider4 жыл бұрын
Good to know I have a stock Bus (86) as well and have changed mine before never knew this.
@craigkucing97793 жыл бұрын
@@dansperformanceparts Not critical but better and recommended.
@ericbrandt86757 жыл бұрын
Great video.....I use a paint ball marker and mark a line across the axle so I get CV clocked on same spline.....the mark also serves the purpose of telling me if I've twisted an axle with a simple visual inspection.
@entercybotron61547 жыл бұрын
thanks for the video, is there a name for this type of cv?
@zico32398 жыл бұрын
can this be used for road legal reverse trikes?
@dasonstalnaker97646 жыл бұрын
underfloor heating installer probably not depends on your setup