victoryarchery

Пікірлер

@charlie-xu4zu 2 күн бұрын

Why is it I’m shooting 68lbs my 350 don’t fly consistent but I’ll shoot ab300 spine and get a perfect hole everytime?

@LMBlife 5 күн бұрын

I think i put too much glue

@evi2083 6 күн бұрын

If the arrow company tells you that acetone will weaken the shaft which they do in fact say right in the instructions when building your arrow. Easton tells you to not use it at all.

@rexrice4496 8 күн бұрын

Does the length of the shaft/bolt make any difference when testing where the cock vane goes. It seems like the 28 inch arrows will flex more than the bolts. Bet you can tell I'm a rookie. By the way, good video Nate.

@dustinthewind302 11 күн бұрын

Vf tkos need more love

@scottyjames2432 16 күн бұрын

Apparently just spine range.

@compound_bros 17 күн бұрын

Thank you for the help!!

@rexrice4496 27 күн бұрын

What is that background noise for? Time to go.

@AronStepp Ай бұрын

What component inserts

@brandonwilloughby4414 Ай бұрын

What Vanes?

@paulheberling2750 Ай бұрын

Yes but mass increases penetration more than a smaller shaft. And a larger diameter shaft can weigh more. So there’s that to consider. I tested it.

@liamboyle9199 Ай бұрын

Maybe he doesn't want to sacrifice a X amount of speed🤔

@brandonwilloughby4414 Ай бұрын

Speed kills

@paulheberling2750 Ай бұрын

@@brandonwilloughby4414 yes, when it’s propelling a heavy ass arrow

@brandonwilloughby4414 Ай бұрын

@@paulheberling2750 are you a ranchfairy lover? You shoot 240 fps? 😂

@paulheberling2750 Ай бұрын

@@brandonwilloughby4414 I do love me some ranch

@kevinfox2370 Ай бұрын

Sweet

@feelsgooddoit Ай бұрын

If your runout isnt perfect, your ram test isnt accurate

@curtwatkins9520 2 ай бұрын

I've never understood the gotta go 280 thing? If ya gotta go 280... how do trad bows ever kill anything????

@CatfishCody 2 ай бұрын

I got mine at scheels. I changed my draw length and they told me they couldn't cut my arrows down because of the insert. Is that true?

@JBJHonez 2 ай бұрын

Yall suck because you don’t answer peoples questions or reply to comments

@jordanbrooks946 2 ай бұрын

I run the rip xv

@KonstantinMazila 2 ай бұрын

👍👍👍👍

@Aloha_Bama 2 ай бұрын

Do a full test of armor piercing arrows on Level 1-4 Armor.

@wesmurer6884 2 ай бұрын

Full test of what?

@Aloha_Bama 2 ай бұрын

Will they penetrate Level 3-4 Armor?

@Vincerama 2 ай бұрын

The website no longer has a wizard. It only has a spine calculator, and it seems focused on hunting arrows.

@benpayneford 3 ай бұрын

Can you remove the inserts and put a different one in using that glue?

@markod7662 5 ай бұрын

If this is product presentation it would really help to make a close up of the insert while you were putting the glue on. That is the point of this video, and we do not get to see anything.Music on the other hand is really not necessary.

@LetThemGrow 5 ай бұрын

What is a good target for those arrows? Just switched and my removal from my bag target is terrible.

@Raevenswood 6 ай бұрын

did you forget the pay the power bill?

@bastardofthesun331 6 ай бұрын

Was wondering if your 95 grain insert for vap ss now colored black?

@JG0929 7 ай бұрын

These videos are great - the background music that you have in them makes it tough to concentrate and understand what you are saying. Keep up the great content

@brandon22333 7 ай бұрын

Can you re use the inserts?

@chrissinor3145 7 ай бұрын

No spin tuning with fixed blade broadhead?? How do you know 100% that your insert is straight unless you spin tune? Also, you don't show how much time you have before the glue sets..... back to the broadhead, we need a little time to spin tune.

@UltraLimitedHD 8 ай бұрын

Next time lose the music.

@south_hunts_605 8 ай бұрын

Would love to have the source for the bearing/wheels you use and they seem to be plastic or some kind of a poly wheel instead of steel. Love the idea of your homemade board but you gave us no info

@andnowyourmad7562 8 ай бұрын

Tell me why I can’t find this.

@JohnNeedham-zk5ms 7 ай бұрын

The glue or the insert sizes

@JohnNeedham-zk5ms 7 ай бұрын

Torch tip cleaner Arrow primer pen and Easton glue because finding victory glue insert and even v1 arrows are a pain why isn’t it available on Amazon and finding lighted knock to fit the od is a pain but I’m talking about the rip xv 405 grain arrow at 80# hauling tail

@joeditz48 8 ай бұрын

Victory team, could you guys lower the cost of a dozen shafts if you dont include the inserts? That would be awesome! I dont like the aluminum inserts you guys use, they bend.

@southernbowhunter 8 ай бұрын

I second this

@joeditz48 8 ай бұрын

@@southernbowhunter thank you brother

@brightmal 9 ай бұрын

I'm planning to buy some of these, but my issue is I'll be shooting them from a 30-pound recurve. How much weight would I need up front to make a 650-spine arrow shoot properly from a 30-pound recurve? Assuming I use the longest length rather than cutting them down to my 29-inch draw length.

@jkgkjgkijk 9 ай бұрын

How about including the instructions in the arrow box?? I spent 130.00 on your arrows. I went to a 40 year old pro shop on long Island and the owners and two customers with high end compound bows had no clue. It's also not labeled on the arrows what type of bow they are for. I own a recurve and these are for compound bows. I'm new to Archery and spent a lot of unexpected money. Eventually, I'll get a compound bow and learn the craft but you guys need to get your act together. Right now, you have a discouraged new archer.

@leafinitup1 Ай бұрын

Shouldn’t matter what type of bow you use it on as long as you have the correct spine for your set up

@evi2083 6 күн бұрын

It doesn't matter. If he had the instructions for spine strength in the box the chart would include recurve and compound bow ratings. There is no difference in arrow at all just spine strength. You would be shooting a weaker spine strength that is all. I wouldn't listen to anything this guy is saying about building arrows. You don't use acetone on arrows. All you need to do is use a wire brush scratching the inside up for binding the glue to shaft then clean the inside with a pipe cleaner. They sell kits at archery shops for this. When fletching arrows you just lightly wipe down the area you are fletching with rubbing alcohol to insure the surface is clean before gluing in your fletching.

@shocker8600 9 ай бұрын

Have to say not a big fan of the new fletching been shooting them for 2 weeks and all the fletchings are peeling off after just target shooting. Ordered new DAC custom Super Sabre veins hoping to have better luck.

@paulhunsicker4271 10 ай бұрын

This video literally was pointless. I love my Victory bolts, but thought I would get some valuable info out of this video. I was mistaken.

@JH-hx2cl 10 ай бұрын

You should probably pull the nock out before gluing your insert in. When you install the insert into the shaft with a nock installed on the back, air is being compressed in the shaft. As the insert dries the air can push the insert forward, youd never know it becuase you have an outer sleeve hiding the gap.

@richardvanmarter8780 10 ай бұрын

I could do without the back ground music

@robertcrowther6134 11 ай бұрын

Would not the length of the insert increase the stiffness of the spine

@joshkimball8084 11 ай бұрын

Hoping to get into these arrows I love them Fletching you use hate my blazer ones I have now seem to hit my beard .. what's the best weight?? Or weight you use for white tail??

@mattgoodrum1142 11 ай бұрын

What type of saw is this?

@fckyoutube2852 Жыл бұрын

Had fletching issues on all 3 six packs i purchased. Apparently bad glue on the fletching lost at least one from every pack . Had my local archery shop remove all the fletching and replace and reglue them on every single arrow . Not super satisfied seeing how this was my first day shooting my new compond bow that was professionally set up and ended my training session only 30 mins in after spending $175 for brand new arrows . Since the reglue, I'm happy to report not a single issue with the fletching or the arrow itself. Great balanced flight ,easy to remove from the target.

@jacobthompson7456 Жыл бұрын

Throw a 150 grain fixed blade and spine up to a 350 spine. You will be amazed!

@donwaldroopoutdoors3665 Жыл бұрын

Old man here , trying go trad shooting 45# mesa longbow this year

@eggbert191 Жыл бұрын

Who makes a lighted knock for 4mm arrows that isn't so fragile? So many break to easy

@hooch1111 Жыл бұрын

Why acetone? For simply preparing surface for glue 97% alcohol is better.

@sfrancis3514 Жыл бұрын

Maybe I missed it but how long are you letting the glue dry before it’s safe to use?

@kothliim6429 11 ай бұрын

If its regular rubberized CA glue ive waited as little as an hour before. YMMV though.

@theeverydaybowhunter 7 ай бұрын

I always let mine cure for 24 hours because I want to maximize the adhesion. It depends on what you’re using but it’s a good rule of thumb to go by.

@wcwcgarner2717 Жыл бұрын

Kip smells it and says heart shot.😂 dude you make lol. Keep on bow hunting

Ең жақсы KZbin

Пікірлер