I have a herpa 1:500 Cebu pacific a330-900neo with the same reg rp-c3900
@Mr.ynmCrafter14 күн бұрын
@@Jet2holidays_757 cool! would love to have it too!
@agungjaco824116 күн бұрын
i chose klm orange pride it is so AAAAAAAAAA I LOVE IT SO MUCHHHHHHH thx for the tutorial
@Coolpenguinplane27 күн бұрын
Cool video
@KvsavageАй бұрын
I dont have a pc or printer but couldni go to like a printer place and get this printed and it would work?
@TheRealJazz359Ай бұрын
How long do these usually take?
@Mr.ynmCrafterАй бұрын
@@TheRealJazz359 about 45mins or few hours but it depends which aircraft or difficulty you choosed!
@TheRealJazz359Ай бұрын
@@Mr.ynmCrafter So with that in mind, how long would this 777 take?
@Mr.ynmCrafterАй бұрын
@@TheRealJazz359 usually around an hour. So this will take a lot of patience and efforts!
@TheRealJazz359Ай бұрын
@@Mr.ynmCrafter I just started mine and I have the fuselage almost done, thanks for the advice! 🫡
@Mr.ynmCrafterАй бұрын
@@TheRealJazz359 anytime❤️
@TalehMustafaАй бұрын
how can i build nose?
@Footgamerforlife26 күн бұрын
Exactly
@talehmustafayev626Ай бұрын
Can u tutorial cockpit?
@ian_does.thingsАй бұрын
Hey where tut
@Mr.ynmCrafterАй бұрын
@@ian_does.things i can’t really upload much videos recently because of my education. But i promise i will make a tutorial much sooner!
@abdussakur5585Ай бұрын
Nice job❤
@Mr.ynmCrafterАй бұрын
Thanks 😄
@parkersworld7752Ай бұрын
Does stick glue work fine
@Mr.ynmCrafterАй бұрын
@@parkersworld7752 yes! but be careful not to put too much! it’ll ruin the model.
@greycell_editz2 ай бұрын
thank you very much for helping me make my first paper craft, this tutorial was very helpful. please making more of this content so i can also make my own airport, also, i recommend trying to show the parts more so we can see how to do it. thanks once again! ❤❤😊😊 and also remember me when you get famous!😊
@Mr.ynmCrafter2 ай бұрын
@@greycell_editz I'm grateful for your kindness and for taking the time to reach out. It means more than you know! Thank you soso much for your support and encouragement!
@Mr.ynmCrafter2 ай бұрын
@@greycell_editz Don't worry even if i am not famous as i am, you guys have a special place throughout this career!
@ronaldredz20952 ай бұрын
Found it ymun
@greycell_editz2 ай бұрын
your welcome and thanks a lot!
@greycell_editzАй бұрын
and also consider to show how to make the landing gears because i’m stuck on them
@tillieproductions2 ай бұрын
i chose PAL and it looks AMAZING!
@Timmygodcrafter2 ай бұрын
I cant make it my printor is out of juice
@Mr.ynmCrafter2 ай бұрын
you can wait for the next time your printer will be refilled with inks if you are using inkjet printer!
@Timmygodcrafter2 ай бұрын
@@Mr.ynmCrafter yeah
@TimmygodcrafterАй бұрын
@@Mr.ynmCrafterI GOT SOME MORE JUICE FOR MY PRINTER YEEEAAAS
@Mr.ynmCrafterАй бұрын
@@Timmygodcrafter YESSSS LETSGOOO!
@user-re8hs3jk8s2 ай бұрын
What if i don't have a 3d printer 🖨️
@Mr.ynmCrafter2 ай бұрын
You dont need a 3d printer to print the template regular printer should be fine.
@animationexperiment98912 ай бұрын
Im trying to do it too ,but i just cant get the nose right
@saadtalal58992 ай бұрын
Just pls can you make the graphic quality better for the video
@Mr.ynmCrafter2 ай бұрын
I see nothing wrong with the resolution? You can always adjust the quality on the top right corner of the video!
@saadtalal58992 ай бұрын
Ok thnx
@gelvielagos49312 ай бұрын
Is it edible?????
@Mr.ynmCrafter2 ай бұрын
What do you mean edible?😅
@willemh.29242 ай бұрын
Do you use office paper or cardstock?
@Mr.ynmCrafter2 ай бұрын
regular a4 office paper
@Curryman-nw2pi3 ай бұрын
is this model flyable?
@Saba-me2dm3 ай бұрын
nopr
@Timmygodcrafter2 ай бұрын
Yes just throw it out the window in da wind and fingers crossed it will fly
@Nothingherelol-n2 ай бұрын
I tried it is flyable( with da wind ofc )
@redakabbaj6048Ай бұрын
No
@rainarthur1075Ай бұрын
Probably not
@User-vrmaster-089XDD3 ай бұрын
Sorry if this sounds sudden but how do you make rotating gears? PS I look forward to your next video :)
@Mr.ynmCrafter3 ай бұрын
I will make a tutorial video about it. Stay tuned!
@user-hd6xk4qy9v3 ай бұрын
What glue did you use?
@thanhattv55763 ай бұрын
Vietnam airlines Boeing 777-200ẻ
@user-gf3pj7bk8z3 ай бұрын
You earned a subscriber I love it❤
@Mr.ynmCrafter3 ай бұрын
Thank you sooooooo much!❤️❤️❤️❤️
@MD11Pal3 ай бұрын
Did you use band paper or oslo paper in the print?
@Mr.ynmCrafter3 ай бұрын
Hello there! I used a regular 80-100gsm a4 office paper the regular ones! U can find it anywhere!
@MD11Pal3 ай бұрын
I accidentally use band paper I was on urban cuz we don't have any PC and printer so I go in urban to print it idk if they have a4 office there using band paper for printing
@Mr.ynmCrafter3 ай бұрын
@@MD11Pal Perfect any type of bond paper as long as it is not a soft copy its great
@MD11Pal3 ай бұрын
@@Mr.ynmCrafter if it soft it will not assemble?
@MD11Pal3 ай бұрын
@@Mr.ynmCrafter and I use long band paper
@Saba-me2dm3 ай бұрын
Can you please make Boeing 747-8F I am trying like for weeks but I can't make one
@Mr.ynmCrafter3 ай бұрын
Sure soon!
@Saba-me2dm3 ай бұрын
ok
@Saba-me2dm3 ай бұрын
My problem is that small parts like tires and engine i can't cut them out perfectly and i can't cut the planes parts out right
@AviationWorld4083 ай бұрын
i chose united and it looked great! thanks!
@Mr.ynmCrafter3 ай бұрын
Sounds great! Thank you!❤️
@BosskAviation7514 ай бұрын
The glue I use is hot glue but when I did my Saudi 777 my engines touched the ground
@Airbus.34016 күн бұрын
The pylon is on the wrong side 😊
@AviationSpot564 ай бұрын
How did you tilt the landing gears on your cebu Pacific a330. Can u pls explain
@Mr.ynmCrafter4 ай бұрын
Hello! I usually cut the gears itself then sticking a rectangular shape paper to support it and make sure its not tighten otherwise, itll not rotate and thats pretty much all😁
@AviationSpot564 ай бұрын
@@Mr.ynmCrafter I can't understand can u pls make a small tutorial I'm also a papercrafter and have a yt channel (with 1.7k subs) and if you do a tutorial it would rly help pls pls
@Mr.ynmCrafter4 ай бұрын
@@AviationSpot56 sure! on a next tutorial. I will do it on my Lufthansa A340 so stay tuned! and congrats on your yt channel! sending supports!❤️❤️
@AviationSpot564 ай бұрын
@@Mr.ynmCrafter thanks pls upload the video it really helps
@AviationSpot564 ай бұрын
@@Mr.ynmCrafter btw why aren't you posting videos nowadays
@vicneshen.k84185 ай бұрын
This is awesome!This helped me for my Thai A350-900. I can’t thank you enough:)
@Mr.ynmCrafter5 ай бұрын
anytime! and thank you so much for supporting me too!❤️❤️❤️❤️
@mrbigshot1235 ай бұрын
Is it ok if i use cereal box cardboard for wings and landing gear? If yes, will it be sturdy? Im trying to make model airport
@Mr.ynmCrafter5 ай бұрын
yes of course! and its one of the best cardboards to add on your infills. And yes it would be sturdy as long as it is 2-3 layers.
@mrbigshot1235 ай бұрын
@@Mr.ynmCrafter ok!
@Mr.ynmCrafter5 ай бұрын
@@mrbigshot123 alright❤️
@JhoerenRodriguez-fq4kh5 ай бұрын
Nice
@paper_plane78995 ай бұрын
that look so easy to build 😁
@Mr.ynmCrafter5 ай бұрын
its because it is!❤️
@Mr.ynmCrafter5 ай бұрын
and its fun to build too!
@User-vrmaster-089XDD5 ай бұрын
my new favorite page
@Mr.ynmCrafter5 ай бұрын
Awwwww thank you soooo much!! Sending hugss 🤗🤗❤️❤️❤️
@Quackerton036 ай бұрын
do i use the 2 other noses and extra wheels
@Mr.ynmCrafter6 ай бұрын
Nice good work keep doing that to master your craft!
@Realmadridporsiempre10116 ай бұрын
Pidanle ayuda a sus padres
@Gek_STOP_TAKING_EVERY_USERNAME6 ай бұрын
what is that glue type? i really it cuz im using hot glue guns for my models 😭💀
@Mr.ynmCrafter6 ай бұрын
Hi there! For glue, just a regular paper/wood glue i advice not using hot glue bcs it will just get stringy and bumpy.
@Gek_STOP_TAKING_EVERY_USERNAME6 ай бұрын
oh thanks very much@@Mr.ynmCrafter
@masotan1526 ай бұрын
Btw do u have a link for the a320 cebupacific sharklets?
@@masotan152 sadly theres no a320 version of the old livery but theres a a319 version check it out drive.google.com/file/d/1Dy6TylITzB1wLSnV7sEczPFeu9h8CsOH/view
@AgungJeco6 ай бұрын
Oh i think i can do it i guess 😢😢😀
@AgungJeco6 ай бұрын
Thats hard like a a380 nose😢😢😢
@AgungJeco6 ай бұрын
Ummmm...... Really that hard ok😢😢😢
@Mr.ynmCrafter6 ай бұрын
it just need time and effort. for more instruction please visit www.little-model-airport.com/tips-for-assembling
@masotan1526 ай бұрын
For me, just practice
@karakocexe6 ай бұрын
I couldn't build the engines, can you show me how you did it? please this will help me
@Mr.ynmCrafter6 ай бұрын
you can start by rolling the engine cut marks. Do it just like the fuselage make a tube out of it and put the engine turbofan inside it and add the cone shaped part. if you want a clearer instructions you can visit www.little-model-airport.com/tips-for-assembling for more instructions ☺️ hope it helps!
@user-hh5ii1bz1r6 ай бұрын
Hey bro, I thought it was really cool, what paper did you use? A4?
@Mr.ynmCrafter6 ай бұрын
Yes the regular office one
@SyrianCPMPlayer6 ай бұрын
Hey, so i make planes with tape, they look horrible,and idk how to make landing gear, just a question,Could you tell me how to make the landing gear?, and how old are you
@Mr.ynmCrafter6 ай бұрын
Hey there! I suggest not making planes with tape such as clear, mask or any other tape use glue instead it will make it a lot better, and for the landing gears all you have to do is to cut it and stick it to a slightly thick cardboard not too thick. And wait to dry and stick it directly underneath the fuselage and the nose. Hope it helps! And for my age just try to guess😅
@SyrianCPMPlayer6 ай бұрын
@@Mr.ynmCrafter12, but also i dont have glue, tape is my only option, sadly, could u try making a video of you making one with tape?
@Mr.ynmCrafter6 ай бұрын
@@SyrianCPMPlayer I don't really think so bcs i usually does it with glue but ill try and also ur soo close at guessing my age!❤️
@cheesenoodles3807 ай бұрын
what are the type and gsm of papers you used?
@Mr.ynmCrafter7 ай бұрын
Just a regular A4 office paper
@Mr.ynmCrafter7 ай бұрын
You don't wanna use the thick paper bcs it will be hard to craft
@AvitionMedia7 ай бұрын
A question, what do you use for wing filling? The Emirates plane looked very good on you.
@Mr.ynmCrafter7 ай бұрын
A thin cardboard should be perfectly fine
@AvitionMedia7 ай бұрын
Ok thanks
@Mr.ynmCrafter7 ай бұрын
@@AvitionMedia Good Luck!
@Horseyiscool8 ай бұрын
I did not know that the wing infill is for the wing i had no idea of what it was.😭 Also where did you get that thick piece of paper from?
@Mr.ynmCrafter8 ай бұрын
Slr! wing infill is that wing shaped marks with code numbers! you can see that if you print one. I got my thick paper on a thin cardboard box u can use any thick paper like illustration board make sure it is not very thick and slightly thin
@Horseyiscool7 ай бұрын
@@Mr.ynmCrafter I knew I was just confused for what it was for those pieces and now I'm building another one and I did the infills and its a lot better