QUALITY ASSURED | Diode Dynamics
0:37
Пікірлер
@filo.ventures
@filo.ventures 9 сағат бұрын
How would you wire it this so you can turn the lights on/off with say a switchpro or auxbeam 8-gang switchpad?
@diodedynamics
@diodedynamics Сағат бұрын
We offer a reverse light wiring harness that allows to to use an aftermarket switch panel! You can check it out in the link below: www.diodedynamics.com/reverse-light-wiring-kit-w-running-light.html
@khill1101
@khill1101 22 сағат бұрын
I'm in the process of custom mounting SS3 fog lights to my 2004 Suburban Z71. The factory fog lights leave much to be desired. Once I have the SS3 fogs hooked up how I want them I'll be able to navigate much more confidently in the snow rain and fog. I'd love some SS5s for aux high beams but it was stretching my budget just to get the SS3s lol.
@diodedynamics
@diodedynamics Сағат бұрын
That's great to hear! Safety while driving in poor visibility conditions is priceless! Let us know if we can help you in any way!
@Guccioveralls
@Guccioveralls Күн бұрын
These do not come plug and play for the 2015 gmc sierra, had to spend a long time getting the collar the right placement to get the led position correct. Super headache replacement.
@diodedynamics
@diodedynamics 23 сағат бұрын
Sorry to hear about that! We have an install guide on our website listing that might help! www.diodedynamics.com/hi-lo-beam-led-headlight-for-2014-2015-gmc-sierra-1500-pair.html
@Glyphosatemax
@Glyphosatemax Күн бұрын
Doesnt work on gt86 2019. Wont save when you put stalk in center.
@diodedynamics
@diodedynamics Күн бұрын
Sorry to hear about that! You can check out the listing on our website to see the compatible vehicles that this module is designed for: www.diodedynamics.com/smarttap-cf18-led-flasher-module.html
@Glyphosatemax
@Glyphosatemax 23 сағат бұрын
@@diodedynamics I contacted the support who took the module under warranty but the problem is the same even though according to the support the vehicle is compatible
@wkosch1
@wkosch1 Күн бұрын
My 2023 Ford Bronco Big Bend built in the first week of November of 2023 had bolts securing the fog lights with a 3/8 head not 10 mm. I installed the lights and they are great! They are brighter, with a wider beam pattern and the light lights up the road much farther.
@diodedynamics
@diodedynamics Күн бұрын
Thanks for the heads up! We'll have our team update the listing!
@Dobester95
@Dobester95 Күн бұрын
Fingers crossed you guys will make a kit for the 2025!! Just ordered one!
@diodedynamics
@diodedynamics Күн бұрын
We'll be sure to confirm fitment! Stay tuned for more info!
@jeffreybrooks3004
@jeffreybrooks3004 2 күн бұрын
Any word on the lasers?
@diodedynamics
@diodedynamics 2 күн бұрын
Not at this time, however, stay tuned for future releases!
@venicejosephplasencia1475
@venicejosephplasencia1475 3 күн бұрын
so they're not adjustable and can't aim it down since they sit flush on the bumper housing?
@diodedynamics
@diodedynamics 2 күн бұрын
They are adjustable, however if they are being used as fog lights, they will be very close to where they need to be regardless!
@venicejosephplasencia1475
@venicejosephplasencia1475 Күн бұрын
@@diodedynamics i tried everything and it barely moves once it’s attached. The pod sits flushed inside the oem bumper. Regardless, the pod itself doesnt move much at all inside its housing bracket
@venicejosephplasencia1475
@venicejosephplasencia1475 Күн бұрын
@@diodedynamicsthe only way to adjust this in my opinion is adding washer to the two bottom screws to tilt it somehow. Unless you have another way? Thanks
@diodedynamics
@diodedynamics Күн бұрын
@@venicejosephplasencia1475 You may be able to put a washer between the bumper and the brackets to allow for more adjustment if necessary.
@theuniquechannel8483
@theuniquechannel8483 3 күн бұрын
I installed this in my 15 accord with projector but they look very dim i would say worst than the stock halogen when i face a wall the beam pattern is perfect is just not good output of light
@diodedynamics
@diodedynamics 2 күн бұрын
Go ahead and give us a call at 314-205-3033, Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at [email protected], and our in-house US service team would be happy to help troubleshoot so you have a better output!
@bruceyyyyy
@bruceyyyyy 4 күн бұрын
Milton is a good dude. Glad I could help out with the build.
@silverbulletxv4497
@silverbulletxv4497 3 күн бұрын
Without you she’d still be running around with that terrible 3.7 gearing! You the man bruceyyyyy!
@philarnold8096
@philarnold8096 4 күн бұрын
Just spent almost 30 minutes trying to get the bulbs in. The first one went in after 10 tries and the driver's side maybe 20 tries. I literally removed and installed the factory bulbs several time to see if I was missing something? Nope. The issue is the Diode bulbs have larger rubber seals than the factory. They are just trickier to install. Eventually they did work.
@diodedynamics
@diodedynamics 2 күн бұрын
Glad to see you got them installed!
@texasgrillchef8581
@texasgrillchef8581 4 күн бұрын
It’s nice someone makes SAE DOT approved fog lights. But what’s interesting, at least in the three states I have been in. The police have never questioned anyone on their fog lights, not when inspections were at one time required were they ever an issue. So wondering why it even matters.
@diodedynamics
@diodedynamics 2 күн бұрын
In some states, regulations are a bit more restricted on aftermarket modification, so we wanted to make a product that all customers in all 50 states can use without any trouble!
@brevstgaard
@brevstgaard 4 күн бұрын
Looks nice. Great with the colors to spice it up 🎉😊
@jeffreybrooks3004
@jeffreybrooks3004 4 күн бұрын
It’s the only product I have bought and will buy. My family is from Missouri and I support American made. The only thing I have been waiting for it the lasers to come out or any new knowledge.
@cheyennetheis3799
@cheyennetheis3799 5 күн бұрын
Yeahhhh!!! Go Zane, Dorothy, Kim, Carey, & Milton!!! 🎉❤😊
@keithmurray7493
@keithmurray7493 5 күн бұрын
My rig made the cut! I'm internet famous! 😊
@diodedynamics
@diodedynamics 2 күн бұрын
Yes you are! 💪💪🎥
@redneckwithtech8976
@redneckwithtech8976 5 күн бұрын
Been following Diode Dynamics since subaru motorsports and Dirtfish got their motorsports mounts and bars. Little while back finally got myself some SS5 pods, 4 of them in fact, for my daily driver/Rallycross car. Living in Washington and traveling in the back country at night, aux lighting is a must to spot deer, and traveling at speed at Rallycross, you have to have both the throw and clarity to be able to see the next turn ahead of you or if there's danger on course, same thing with stage rally. My stage rally car will definitely be equipped with Diode Dynamics, because of the price to performance, reliability, and ease of procurement if replacements are needed.
@diodedynamics
@diodedynamics 2 күн бұрын
We appreciate the support and trusting us on your daily as well as your Rally Car!
@redneckwithtech8976
@redneckwithtech8976 2 күн бұрын
@@diodedynamics best part? It's the same car that is my Daily and rally car. I daily the race car, as one should!!!!
@diodedynamics
@diodedynamics Күн бұрын
@@redneckwithtech8976 That's awesome!
@toyotabrony
@toyotabrony 5 күн бұрын
Again. Diode Dynamics is one of the most elite brands of the off-road in its category. @DiodeDynamics I have a 2015 lifted Scion xB. And I have someone installed for me of dual fourth bumper reflectors as a led red brake lights. Along with sylvania zevo red led bulbs. And they are great and much safer. But now one of my couple red led diodes burned out which is normal as expected. But u guys have DD’s hitch lights or something that I can replace them for better higher quality little pods, as a better red four brake lights, that are as bright as my main brake lights? I oh those heatsinks. And better quality materials, they will truly last. Maybe u have a universal type lights?
@diodedynamics
@diodedynamics 2 күн бұрын
We offer a 2" HitchMount that you can install! If you have a 4-pin trailer harness, you'll have to make a custom harness that taps into your taillight reverse light power wire.
@toyotabrony
@toyotabrony 2 күн бұрын
@@diodedynamicsis there any other way that only does red led pod lights?
@diodedynamics
@diodedynamics Күн бұрын
@toyotabrony You can choose to snip the power wire to the reverse lights, so you only have a red running light and a 4th brake light if you choose, however, if you have the feature, why not use it and benefit from it! 🤘
@toyotabrony
@toyotabrony Күн бұрын
@@diodedynamics so technically speaking, i can wire the wires for reverse light and brake light function?
@diodedynamics
@diodedynamics Күн бұрын
@@toyotabrony Technically speaking, yes, you can re-wire for the desired output. This will however, void the warranty on the harness.
@shortyorc121
@shortyorc121 5 күн бұрын
When are the f150 led headlights and foglights going to be available?? They been on backorder forever. I too want to know why Diode!! Edit: I'm willing to wait for a quality product, and that's what I'm doing. As soon as they are available I will be buying.
@coreystafford2123
@coreystafford2123 5 күн бұрын
Great video!!
@diodedynamics
@diodedynamics 2 күн бұрын
Glad you enjoyed it!
@bu6jon
@bu6jon 5 күн бұрын
an inspiration to my build since day 1. Keep it up man
@silverbulletxv4497
@silverbulletxv4497 5 күн бұрын
Thanks man! Love doing it so no doubt I’ll be around for a while! ❤
@HBOCEPHUS
@HBOCEPHUS 6 күн бұрын
Diode Dynamics is by far the best of led lights. I've been a customer for over 10+ years. I remember going to their original building in West Port Plaza.
@diodedynamics
@diodedynamics 3 күн бұрын
A true OG fan! We appreciate the long term support! Diode to the Moon! 💪
@SuperJOVega
@SuperJOVega 6 күн бұрын
I'll be good to make a kit for the FX4 which has tow hooks but some space left to add smaller lights
@diodedynamics
@diodedynamics 3 күн бұрын
We'll be sure to pass that along to our engineering team for future consideration!
@glennalphonso44
@glennalphonso44 6 күн бұрын
Waiting for my SS5 to come in
@diodedynamics
@diodedynamics 6 күн бұрын
Oh yeah! We can't wait to see them installed!
@michielvandiermen9754
@michielvandiermen9754 7 күн бұрын
Where to buy these in Europe/the Netherlands?
@diodedynamics
@diodedynamics 7 күн бұрын
You can order these from our website at diodedynamics.com, or find a dealer near you using our dealer locator tool! Here is the link for the dealer tool: www.diodedynamics.com/find-a-dealer
@loganlucero6833
@loganlucero6833 7 күн бұрын
Could GM make this more complicated??? Holy shit it used to be so easy
@nickh8370
@nickh8370 7 күн бұрын
Sexy Beast! What lighting upgrades were all done?
@hunterhogan9326
@hunterhogan9326 8 күн бұрын
why is there a speaker in the front of the car anyway?! anyone?!
@diodedynamics
@diodedynamics 8 күн бұрын
Great question! This speaker is only installed on hybrid models. Hybrid vehicles are equipped with speakers to alert pedestrians to their presence, especially at low speeds when they are operating in all-electric mode and produce less noise than traditional vehicles. This is due to safety concerns that pedestrians and cyclists, especially those with visual impairments, may not be able to hear them coming.
@GandleTheGreat
@GandleTheGreat 8 күн бұрын
For a 2016 Hybrid to replace to LED is it just the bulb. Or would I need more hardware to make it work?
@diodedynamics
@diodedynamics 8 күн бұрын
If you have factory HID bulbs, you'll need an HID system to replace it with, however, if you have a halogen headlight, the process should be the same as shown in the video.
@CombatWombatQRF
@CombatWombatQRF 8 күн бұрын
Way tooooo much yota lately, we aren’t all Toyobros and it gets old
@diodedynamics
@diodedynamics 8 күн бұрын
Hey there! What do you drive? We'd be happy to share other built up rides!
@GM-25
@GM-25 8 күн бұрын
Wow. Perfect sistem. How about Ram 1500 2009-2018? 💪🏽
@diodedynamics
@diodedynamics 8 күн бұрын
@@GM-25 We'll be on the lookout for more rams! Stay tuned!
@toyotabrony
@toyotabrony 3 күн бұрын
So?🤣 doesn’t matter what u say. Toyota is life and it’s awesome to roll with. So get over it
@GM-25
@GM-25 3 күн бұрын
@@diodedynamicsperfect ❤
@toddgriffin3037
@toddgriffin3037 9 күн бұрын
I like having different temps between the fogs and heads; it's distinctive, and I think that makes you safer.
@toddgriffin3037
@toddgriffin3037 9 күн бұрын
Thanks for showing how to do it without taking the dang bumper off like some fools on YT.
@diodedynamics
@diodedynamics 9 күн бұрын
Thanks for the support!
@robertbooth7396
@robertbooth7396 9 күн бұрын
So simple even a man can do it!! Thank you for this KZbin!
@diodedynamics
@diodedynamics 9 күн бұрын
You're very welcome!
@robertbooth7396
@robertbooth7396 2 күн бұрын
Because of this KZbin and your reply to my comment I have just placed an order for these LEDs and a dozen other Diode Dynamics items. Can’t wait for them to arrive. Making my FJ my own. For what it’s worth: Griffin and Casey (sp?) were extremely helpful making sure my order was complete (getting the smart flasher thingy, and answering a few other questions). I know at the end of the month, when the credit card bill arrives) my wife will raise her eyebrows at the order but by then, hopefully everything will be installed and she will see the improvements and not make me return anything… hahah. Thanks again, Paul!
@robertbooth7396
@robertbooth7396 2 күн бұрын
Oh, yes… one more thing… please get the powers that be at DD to produce an H4 lead lamp so my front lighting will be all Diode Dynamics. Cheers!!
@diodedynamics
@diodedynamics Күн бұрын
@@robertbooth7396 We will definitely pass it along!
@okkin981
@okkin981 10 күн бұрын
Are these Glass Lenses? Have the LED factory headlights and don' t want to tap into any wiring. Any Plug and Play Connectors you offer? Thank you
@diodedynamics
@diodedynamics 10 күн бұрын
The lenses are automotive grade polycarbonate, and the fog light kit includes everything you need to install! In order to get the backlight option to function without tapping any wires, we do offer a 3rd gen plug-and-play harness that plug into your factory headlight harness and allows for a full install without tapping any wires! Here is the link for you! www.diodedynamics.com/plug-and-play-backlight-harness-for-2016-2023-toyota-tacoma-pair.html
@okkin981
@okkin981 9 күн бұрын
Thank you! But after looking at your website link, the harness is not compatible with OEM LED Headlights? And that is what the truck has. So no plug and play harness then for trucks that have OEM LEDS?
@diodedynamics
@diodedynamics 9 күн бұрын
@@okkin981 Unfortunately, we do not have a compatible harness for OEM LED Headlights. You will have to use a tap, or custom splice into the power wire in order to gain function of the backlight. The main beam does not require a tap in order to use, so they can be installed without taping anything!
@okkin981
@okkin981 6 күн бұрын
Just bohght this set, super excited to install now. But let me ask are they drop in or do I need to align them after install?
@diodedynamics
@diodedynamics 6 күн бұрын
@@okkin981 We would recommend making final aiming adjustments once they're installed, as things like ride height can effect the output. Here's the link to our video on how to do so properly! kzbin.info/www/bejne/pma1iaRobb-Cj9E&t
@mr.anderson910
@mr.anderson910 12 күн бұрын
When will we see the crosslink bumper kits for the 09-current classic ram 1500?
@diodedynamics
@diodedynamics 10 күн бұрын
We do not have any future plans at this time, however, we'll be sure to pass that along to our engineering team for future consideration!
@Anduin-oy5ij
@Anduin-oy5ij 12 күн бұрын
How do these mounts/lights fair against drive-through car washers?
@diodedynamics
@diodedynamics 10 күн бұрын
Touchless washes are not an issue at all, however, traditional washes are not recommended. They run the risk of snagging on the lights and damaging your truck, knocking the aiming out of alignment, etc.
@andrewjohnlozicajr66
@andrewjohnlozicajr66 12 күн бұрын
As Pres Biden would say, " I have One word " ......Awesome Job!
@andrewjohnlozicajr66
@andrewjohnlozicajr66 13 күн бұрын
Being Biased is subjective. I personally feel that D.D. has the better product. Not only offering a price point for all consumers but also not bashing B.D. Having the optional back light is a nice touch as well. The wider and more powerful output in the Max is a no brainer for me. Honestly, a 8 year warranty is without a doubt, a great warranty as well. This video solidified not only my purchase of the SS 3 Max but my bumper choice as well. Having the ability to use factory mounting options when so many aftermarket bumpers have this size of cutout for the foglights. Motometal lost a sale due to them forcing you buy BD as thier cutouts and mounting points are designed for this smaller fog light. However, DD has factory mounting options for the Rubicon, Saharah and more. Also, they solidified a HiLine Fender Light purchase from American Adventure Labs and upon seeing there video on the 2nd Gen Light and finding out they worked directly with DD to design this Light. Thank you DD for working with other companies to help produce quality products such as what American Adventure Lab does and are still Proufly MADE IN THE USA!
@diodedynamics
@diodedynamics 13 күн бұрын
Thank you for the support! We appreciate the positive feedback!
@NBRPWeazelNews.
@NBRPWeazelNews. 14 күн бұрын
What mounts did you use for the zip ties for the wire management? I can’t seem to find anything that sticks well to that material please help
@diodedynamics
@diodedynamics 13 күн бұрын
We used the included zip tie mounts that are in the kit! You may need to wipe down and clean the area you plan on installing these mounts, however, they should stay put!
@NBRPWeazelNews.
@NBRPWeazelNews. 13 күн бұрын
@@diodedynamicsinteresting I have the same kit and these mounts don’t stick to the hard plastic… I cleaning the area really good but I’m just confused now I don’t want to drill any holes
@kadeskeen5133
@kadeskeen5133 14 күн бұрын
Thanks bro, got the wife's car done! Appreciate the info!
@diodedynamics
@diodedynamics 13 күн бұрын
Glad we could help!
@bronsonburks2745
@bronsonburks2745 15 күн бұрын
Amazing video showing the comparison! I have the white version and have loved them so far. I was blown away at the build quality over OEM. Diode Dynamics has easily become a trusted name in the aftermarket lighting industry!
@diodedynamics
@diodedynamics 15 күн бұрын
We truly appreciate the feedback and having your support!
@treete6908
@treete6908 15 күн бұрын
So when running DRL, are the high beams at full brightness? I had this issue with a pair of cheap LEDs i got on amazon and had to put my stock bulbs back in.
@diodedynamics
@diodedynamics 15 күн бұрын
Yes, there doesn't appear to be a plug-and-play premium bulb or budget bulb on the market that dims. It's an unfortunate design by Subaru.
@treete6908
@treete6908 14 күн бұрын
@@diodedynamics That’s unfortunate, but thank you for the reply!
@brandon3321
@brandon3321 15 күн бұрын
Did you use a resistor kit for the turn signals on this vehicle ?
@diodedynamics
@diodedynamics 15 күн бұрын
Yes, resistors are required to prevent errors or hyper flashing.
@shawnmathew2154
@shawnmathew2154 15 күн бұрын
Can you guys pls make an installation video?
@diodedynamics
@diodedynamics 15 күн бұрын
Unfortunately, we do not perform retrofits here at our HQ but authorized shops with our products. There is an installation video by Jeep Journal on KZbin. kzbin.info/www/bejne/pXy3pXxph7lji6c
@juliusmaracalin1387
@juliusmaracalin1387 15 күн бұрын
No way they should be 200 dollars
@diodedynamics
@diodedynamics 15 күн бұрын
Yes, these are price for quality compared to cheap options on the market with low performance and reliability. Our product is designed, engineered, tested, and assembled in the US using the highest quality manufacturing processes and components. kzbin.info/www/bejne/qpeln3ainrGhn68
@scottpalmer1023
@scottpalmer1023 15 күн бұрын
Awesome video! One suggestion, just for consideration, perhaps upload the same video without the music background. Your educational content is so good, I find the music a bit distracting. Undoubtedly some will disagree and say they love music, hence my suggestion to upload two versions and let people enjoy what they like. Thanks as always for the terrific products and comparison videos.
@diodedynamics
@diodedynamics 15 күн бұрын
We appreciate the feedback! We have since this video, we've released new videos with better audio revisions. We'll continue to improve our uploads. Thank you!
@JohnDoe-xo7gg
@JohnDoe-xo7gg 16 күн бұрын
Are you planning on making a fog light kit for those of us with the FX4 package?
@diodedynamics
@diodedynamics 16 күн бұрын
We don't have any current plans, however, we'll be sure to pass that along to our engineering team for future consideration!
@ve3nsv
@ve3nsv 16 күн бұрын
Will this work on my 23 Explorer? It looks like it has the same connector. I took some pictures of mine if interested?
@diodedynamics
@diodedynamics 16 күн бұрын
Hey there! You are more than welcome to try the kit out and see if it works for the 2023 Explorer! We offer a 30-day return policy starting on the day the lights get delivered, so if they don't work, you're not out $160!
@aaronwilliams6165
@aaronwilliams6165 18 күн бұрын
I'm going to look into these for my ladies Braptor. You guys have grown and I still have my led turn signal and interior lights working on my 2010 genesis! Great products.
@diodedynamics
@diodedynamics 16 күн бұрын
We appreciate the support and happy to help with any questions!
@toyotabrony
@toyotabrony 19 күн бұрын
Diode dynamics are known to be one of the best high quality products. And they don’t fool around. These are one of the most serious high quality products on the market. A 8 year warranty is a very solid warranty.