Well, everything has a shelf life, and the 7-10-year bathroom renovation rule has been calculated based on the average lifespan of bathroom products as they can become damaged through wear and tear.

@@matrixgcno they don't

We just renovated the bathroom of our new house. The old bathroom was 40 years old. Definitely ugly, but it still worked.

@@matrixgc Sounds reasonable if you dont look after your place. Some bathrooms last forever.

@janetmerner3731 I mean it's not an exact number, but on average, bathroom products get damaged or become outdated every 7-10 years!\

Always great to connect with skilled electricians. Sure, let’s stay in touch! cheers :)

Great information. Thank for sharing it. Question: Smoke detectors in the kitchen false alarm. Are you find success adding smoke detectors in kitchens? Is there a brand that doesn't cause issues?

@@Generation3electric Thank you for your comment. Smoke detectors in kitchens can sometimes trigger false alarms due to cooking smoke, so heat detectors are a better option as they activate when they detect a significant increase in temperature. If you want to install smoke detectors in the kitchen according to the Philadelphia code, you need to understand the two main types of smoke alarms, ionization and photoelectric. They have distinct requirements. Ionization alarms: Need the most space, at least 20 feet away from cooking appliances. If you have an ionization alarm with a silence button, install it closer, at least 10 feet away. Photoelectric alarms: These can be placed closer to your cooking area, as long as they’re at least 6 feet away. Additionally, Carbon Monoxide detectors can offer additional protection against hazardous gas produced by gas-powered appliances.

Sealing concrete before applying mortar isn’t always necessary, but it depends on the specific situation. For instance: Porous Concrete: If your concrete is very porous, sealing it can prevent it from absorbing too much moisture from the mortar, which can weaken the bond. Dusty or Weak Surface: If the concrete is dusty or has a weak surface, sealing it might help ensure the mortar adheres properly. Moisture Issues: In some cases, sealing can help address potential moisture issues that might affect the mortar. However, many standard installations don’t require sealing if the concrete is clean, solid, and properly prepared. It’s always a good idea to check the manufacturer’s recommendations for both the mortar and any sealant you’re considering. I hope that helps! Let me know if you have more questions. 😊

😅😍

😂

You're right, but that's exactly why companies like us exist! We specialize in these types of renovations and ensure that nothing gets overlooked. Plus, we always allocate some budget for unexpected issues, so there are no surprises down the line.

😅

Yes, cabinets are typically bolted to walls. However, freestanding units like islands and peninsulas, or cabinets facing uneven walls, require floor bolting to prevent tipping.

😂

Lol that's a good one :))

Why not?

Honestly don't know :))

🙂

Don't like the new color? 😂

😅

I know right? 😂

What happened 😅

Why not?

Using a mallet directly on the plank can damage the locking mechanism and leave gaps between the planks. But you can use a tapping block to distribute the force of the mallet and gently tap the planks together. If you install the planks correctly and they lock together, there won't be any space for liquids to seep through. Still, you can use a sealant for finishing. But remember to use a sealant that is made specifically for laminate floors.

Thanks but we're not interested.

@@matrixgc According to your video you deserve more likes subscribers views

@@BD-KZbin-Developer We appreciate your concern, but we're not interested.

Thanks for the kind words! Your recommendation just made our day :)

What's the problem?

Yes they do!

Glad you liked it :)

🙂🙂🙂

Thank you for your positive feedback! The FHA 203k loan indeed is a valuable tool in real estate that more people should consider utilizing. I’m glad you found the video informative, and we will surely continue to create content that helps people make informed real estate decisions.

Thank you very much! Glad you enjoyed it :)

But why?! 😅

@@matrixgc It's such a nice red!!! Gray is so depressing. It's like it's not really a color -- It's an uncolor.

I get the point but grey goes better with everything else and even makes the room look bigger. Don't you agree?@@Tim_ra

😂😂😂

Just a joke my friend 😅

Happy you enjoyed watching it 😂❤

It's really important to wait until the thinset mortar is totally dry before you start grouting. This usually takes about 24 to 48 hours, but it can vary depending on the type of mortar, how humid it is, and how warm it is. It's a good idea to get to grouting as soon as the mortar is dry. However, if it's been a while since you laid the tiles, you might want to give the area a good vacuum first. Always check the instructions for the adhesive you're using to make sure you're following the right timing, especially if it's humid or cold.

Did you notice the look on😮 the outlet faces?? It's like they knew they were going to be traumatized!

Tiny guilty pleasures in life 😂

🤣🤣🤣

It sure did 🤣

Tell me about it 🤣

It's a joke :)) Of course you should take of the plates!

Yes, this is the rough cleanup, which marks the initial phase of the construction cleanup process. For more detailed information, please refer to the article where we have elaborated on the various phases of construction cleanup. matrixgc.com/how-to-do-a-construction-clean-up/

Obtaining OSHA certification is a good way to ensure safe and high-quality work while also keeping customers happy. It may be required in some jurisdictions. For more information, refer to the OSHA website: www.osha.gov/cleaning-industry

This is a good question! A decoupler is typically used to manage movement and moisture in installations prone to these issues, such as wood subfloors or cracked concrete. Since we were working with uncracked concrete, a decoupler wasn't necessary in this case. Regarding primer usage, while primer generally improves the bond between tiles and the floor, the specific mortar we used (Ultraflex 1 www.homedepot.com/p/Mapei-Ultraflex-1-50-lb-White-Flooring-Powder-Mortar-with-Polymer-2905723PP/202198584) does not necessarily require a primer on concrete floors. However, if you have gypsum-based patchings or leveling substrates applying a suitable primer is necessary. Porcelain tile is typically dense and impervious, and as such, it doesn't necessarily need to be sealed. However, applying a sealant to the grout lines is advisable, especially in wet areas, to protect them from stains and moisture. Although our project was tiling a kitchen and living room and was not in a wet area we still applied sealant to the grout lines. I recommend referring to the associated article for comprehensive details. matrixgc.com/install-porcelain-tile-over-a-concrete-floor-like-a-pro/

Great! Let us know if you needed professional help :)

Thanks for your comment!

Air pockets in tiling can result from different reasons like inadequate thinnest coverage, surface contamination, improper trowel notching, differences in absorption rates, or insufficient bedding of the tile. Back buttering, the application of a thin layer of mortar to the back of the tile, can enhance the bond strength by compensating for irregularities, improving coverage, and reducing the risk of voids. It is especially beneficial when addressing challenges that may compromise the adhesion between the tile and the substrate, contributing to a more durable and solid tile installation.

@@matrixgc thanks man, very informative.

I'm an apprentice and my lead tile setter has just flatulence...air pockets. It's very disconcerting especially with out proper ventilation and after the Thai place buffet.

Thank you so much for your kind words! We are glad you liked the transformation of the home. ☺