Size if the bolts would of been nice

I like your video. I don't want to hear someone's life story when trying to do a task. Yours had the perfect amount of speaking. I recommend doing a fluid flush after it's all done depending on how bad the fluid looks or how old it is. Thanks!

Is this OEM replacement or aftermarket one if so which brand

Thank you. This is exactly what I needed to see so that I can replace my power steering pump.

Do you need to put the old brass collar that hold the banjo bolt on the new pump?

How do you bleed the lines ?!

Thanks for a chill video. Was just what I needed to see

What cause sterling rack heard

Upon watching various automotive KZbin videos one can really appreciate what all a mechanic has to go through working on our vehicles. 🚙

Great video, howd you end up filling the pump before putting the last hose on?

Awesome video. Very helpful, thank you.

Great video. I have a question. Same exact layout in my ‘07 Impreza 2.5. I put a new pump in, put some ATF oil in there as needed. Hooked up the supply and return hose. The pump squeals and steering is hard, I tried bleeding and filling my reservoir and everything. Weeks later nothing changed, each turn is hard and it whines loud. Not sure what I did wrong.

Thanks for the video! Got the pump replaced 💪

Hi. Was your oil pump making a wining noise?

Great video, thanks! Recently purchased my 07 RL and am at the beginning stages of replacing the timing belt. Before taking things apart, I noticed a pretty bad oil leak coming from around the oil filter housing area. I figured I would remove the oil filter housing and replace the o-ring/gasket for the housing but know I have been reading about oil pump leaks for the same vehicle and wonder if that is what is going on with my RL. How can you tell if it is the oil pump that is leaking or the oil filter housing that is leaking? RL has around 198k miles. Also; on the crank pulley washer, can you tell me which way the concave side of the washer goes... towards the engine or towards the timing belt cover? Thanks!

Took every bolt off just like you step by step and my pump is still stuck, pivoting on another bolt. Cannot see any bolt anywhere, was there a bolt that you removed that wasn’t in the video?

I like your technique of sliding the nut back in the housing. I would have used a bolt and washers and a large socket to pull itback through... but your way is a whole lot easier. I'm stealing it. thanks for the video

What was the problem with that which you removed

Are there any possibilities of replacing this new pump and it fails......

1:30 In the video it made me feel better about myself taking minutes to get that right hand clip off on air intake scoop. left one is super easy but the right ones good n stuck

I changed one myself and I'm trying to get a seal kit to fix the old pump. What did you do with the old pump?

Hey thanks for the vid just changed mine in the pouring rain 🌧

I know that you did filming tricks to shorten the video so I ask. How long did it take you to complete the job and did you use a rebuilt pump?

Hell of a job man nicely done I'm sending mine to mechanic tho above my head 😁

Hola! Esta bomba lleva posición para el engrane del centro con el cigüeñal?

PLEASE READ: This is a great video. BUT, it does not include torque specs for the installation of the top two hoses. NOTE: The Hose from the reservoir has a rubber O-Ring that sits nicely in the hole. This is the hose north of the pump when the pump is installed. This needs to be tightened, but not crazy. MY PROBLEM: The hose that goes to the power steering column only has two copper/metal rings. No rubber. This screw is bored out. This screw needs to be tightened a lot to prevent a leak. It is a 14mm and I used a torque wrench to torque it to about 20ftlb. It took me a while to figure this out as a first time doer. Wish he and other videos had the torque specs. Make sure bore lines up with hose.

Thank you

Son muy malos para explicar no explican como hecharle la silicona ni el tiempo que hay que esperar cuando se le hecha la silicona

2009 honda odyssey oil pump-i turned the gear but can’t remember if i put flat spot on bottom or top🤷‍♂️ pump went on fine. What do i do??? Oil pan is on. Do i have to tear it back apart?😩😩😩

Hello, good video, where did you buy your pump?

THIS POWER STEERING PUMP VIDEO IS NOT LIKE MY 2013 OUTBACK LIMITED. MY PUMP AND ALTERNATOR ARE MOUNTED VERY DIFFERENTLY. PLEASE INVESTIGATE AND CLARIFY. THIS VIDEO WAS NO, NO, HELP TO AND OR FOR ME.

fantastic job...

Best tutorial yet. Thanks man. How do i know that the pressure hose bolt hole, is aligned with the hose? Is there a mark or should i just mark it myself on the top?

Thanks for posting this!!