Richard and Sophie

Пікірлер

@theroaminggnomad 8 күн бұрын

I absolutely LOVE the Crate idea. Something similar is going in my build. I love the Cedar. I heard it's lightweight and I love the look of unfinished bare wood. It's beautifully crafted! The table on the wall idea is another genius idea and the smaller bed than the usual build. I'm certainly keeping this idea in mind to give my van more functional counter space.

@Bespoke-creations 4 күн бұрын

Thanks for the great feedback! And we are very happy to hear we are a source of inspiration

@wanro027 10 күн бұрын

This layout is the best I’ve seen yet! Great thanks

@Bespoke-creations 4 күн бұрын

Thanks!

@areafifty1 11 күн бұрын

Amazing work. Would love to see how bed is extended.

@Bespoke-creations 4 күн бұрын

Coming soon, I just need to figure out how to add photos to the reply. Otherwise send us an email via our website and we’ll send you a photo

@forsephora44 12 күн бұрын

By God this is the best kangoo conversion I've seen, amazing work!

@Bespoke-creations 4 күн бұрын

Thank you so much.

@jeremybrambles7992 19 күн бұрын

Well done to you both very well thought out

@Bespoke-creations 4 күн бұрын

Thanks!

@lipevp123 19 күн бұрын

Great small Camper Van! congrats

@Bespoke-creations 4 күн бұрын

Thanks! 👍

@pbandthevan 22 күн бұрын

This is excellent! Do you remember which model of skylights you installed?

@Bespoke-creations 4 күн бұрын

Thank you. Yes they were Bomar hatch from the low profile series. They come in a variety of sizes and shapes so you can choose the one that works best for you. They are available online on Amazon and Defender.com

@WalrusRiderCycling 25 күн бұрын

Love these videos to get ideas for converting a van into a camper van. Well done guys.

@Bespoke-creations 4 күн бұрын

Thanks!

@flamefox8989 26 күн бұрын

Nice set-up although I couldn't hear properly as the music drowned you out

@Bespoke-creations 4 күн бұрын

Sorry about the music, definitely not ideal and for sure no more music in the future!

@jpb9254 Ай бұрын

Hello, nice van. I ld like to know how you saw doors ? It seem so nice, so tight...i try with a jigsaw but the result is not as clean as yours.

@Bespoke-creations 4 күн бұрын

For the cut out, the internal corners are done with a hole saw (a scrap piece of wood needs to be clamped to the back to prevent the grain from blowing out on the back face). Straight lines are then cut between the holes with a track saw. The cuts are finished of carefully with a fine bladed hand saw. It is then fine tuned with sand paper. A rebate can be added with a router if desired. The door panels are first cut out as rectangles with a track saw. The rounded corners are cut oversized, and then sanded to the correct radius and carefully adjusted to get all the gaps even.

@helenbrown6194 Ай бұрын

Please lower the volume of the music

@parcos79 Ай бұрын

love it. SUBSCRIBED. mELBOURNE, aUsTRAL=iA :)

@Bespoke-creations 4 күн бұрын

Welcome aboard!

@nannycawete3844 Ай бұрын

Micro van ? No, no. It’s mine. 😊

@DD-co1zn Ай бұрын

3:19 ... "A van without a kitchen is not considered a van" ... You mean a campervan, right ? As in "a van without a kitchen is not considered a campervan" or "a campervan without a kitchen is not considered a campervan" ... Right ?

@mrsexytime_ Ай бұрын

Genius!

@thom7463 Ай бұрын

What plywood did you use? I love the idea of this layout! The panels on the bench top they pull out completely to get access is ingenious. When driving does the cushion slide off the bench?

@Bespoke-creations 4 күн бұрын

The plywood is birch. The cushion immediately behind the cabine is attached with velcro. The driver side cushions are wedged by the table when driving so that leaves only the passenger side cushions that can move. It generally doesn’t (as the end as a recess) and when it does it only falls somewhat in the middle (the lower section) which is not an issue.

@Kevin-zz9nc Ай бұрын

Dance dance wherever you may be. Dancez ou que vous soyez....

@TiagoRuivo Ай бұрын

Can you tell me where you get your skylight?

@Bespoke-creations Ай бұрын

Yes we got it from a French online retailer (H2R équipement) but I’m being told by other viewers that this product is no longer available. Maybe you can ask the manufacturer directly?

@PatrickCourcier-rw8yn Ай бұрын

Super , beau travail et vous avez su en tirer le meilleur parti

@Bespoke-creations Ай бұрын

Merci beaucoup!

@theJuniverse Ай бұрын

Really great use of space.... the indoor/outdoor kitchen that hides away is brilliant....

@Bespoke-creations Ай бұрын

Thanks a lot

@wie-o-wie Ай бұрын

I love your design. How much did you spent on it?

@Bespoke-creations Ай бұрын

We haven’t kept a great record of our expenses but I would say roughly 7000€.

@martinkrueger5806 Ай бұрын

The design and planning is excellent and it turned out awesome. What are the chances of you selling your plans as an ebook for example?

@Bespoke-creations Ай бұрын

Thanks for the great feedback. We actually don’t have the plans. We had a rough layout in head before we started but then we measured everything as we went along between the van constraints and the equipment measurement. So we don’t have a record of every piece unfortunately

@indalo36100 Ай бұрын

Vidéo très bien réalisée et très inspirante ! J’ai vu votre vidéo il y a un mois, depuis j’ai commencé les démarches pour vendre ma voiture et je pense m’acheter un utilitaire de ce genre (maxi Kangoo ou Berlingo XL) pour partir sur des week-ends escalades ! En effet, la taille du lit est non négligeable et c’était un peu la crainte de ma copine avec un minivan mais la le problème est réglé ! ^^ Et le fait de pouvoir garder le côté « salon assis » avec autant d’espace ça à l’air top ! Vendez vous des plans de ce type d’aménagement ? Encore bravo !

@Bespoke-creations Ай бұрын

Merci beaucoup pour votre commentaire! On est content d’inspirer des gens à partir en van en week-end pour faire de l’escalade! On ne vent pas les plans simplement parce qu’on n’a pas gardé la trace de chaque mesure de chaque pièce mais si vous avez besoin de quelques dimensions de bases (genre largeur du tiroir, hauteur des bancs etc) vous pouvez nous écrire via notre site web et on mesurera pour vous!

@redvolksride 2 ай бұрын

very smart idea..

@Bespoke-creations Ай бұрын

Thank you!

@johnmpolk1383 2 ай бұрын

Emmanuel Macron lives in a van?

@VT-wp2ob 2 ай бұрын

Good job guys, keep going 😊

@Bespoke-creations 2 ай бұрын

Thank you !

@boathemian7694 2 ай бұрын

So how much did this cost?

@Bespoke-creations Ай бұрын

This cost US$30,000 at the time (labor and parts).

@boathemian7694 2 ай бұрын

Nice job, I work on yachts and if you aren’t a professional you certainly could be.

@Bespoke-creations 2 ай бұрын

Wow, thanks!

@janwondergem8216 2 ай бұрын

I was wondering how you attached the cork to the panels of your van? Love the build

@Bespoke-creations 2 ай бұрын

We used spray adhesive

@veganmatters6963 2 ай бұрын

Love the use of space well done Do you have any cnc files for the cutout ?

@Bespoke-creations 2 ай бұрын

Thanks. Sorry we don’t have any files we did everything with hand held tools

@ianmedina1992 2 ай бұрын

What's the height dimension? Im 1.85m tall, im afraid to not be able to sit comfortably to work on laptop. Im an architect, love small spaces. Im about to do my own van and this desgin is incredible well put. Congratulations!

@Bespoke-creations 2 ай бұрын

I think you will not be able to sit comfortably indeed. I would say that up to 1.75m is probably ok, 1.8m if you didn’t plan on spending much time inside at all but in your case it will be too low

@ianmedina1992 2 ай бұрын

@@Bespoke-creations I've decided to go with Mitsubishi L300 MWB (tallest interior versión) for this particular reason. Thank you! 😊

@Bandare 2 ай бұрын

As said below, this is one of the most imaginative small van builds I have seen. Brilliant!

@Bespoke-creations 2 ай бұрын

Thank you so much

@Happywifehappylife2 3 ай бұрын

Super build 👌

@Bespoke-creations 2 ай бұрын

Thank you 👍

@Matt_Alaric 3 ай бұрын

How did you get the cork insulation to stick to the walls?

@Bespoke-creations 2 ай бұрын

Using spray adhesive

@Matt_Alaric 3 ай бұрын

In the UK tradesmen's vans are regularly targeted as thieves want the expensive tools inside, so disguising it as a tradesman's van seems counter intuitive to me.

@alcatraz3539 3 ай бұрын

I must have looked at hundreds of van conversions of all sizes over the years and to be honest what you have is done is absolutely amazing. Both the thought and obvious skill in achieving this would put most van conversion businesses in the shade. Well done for a truly fantastic job!

@Bespoke-creations 2 ай бұрын

Thank you so much for your comment!

@fabiend.5243 3 ай бұрын

Bravo, j'adore le soin réalisé dans cet aménagement, super bien fini, bien pensé. Gros défi dans le petit espace dispo dans un Kangoo Maxi !

@Bespoke-creations 2 ай бұрын

Merci!

@jessicaarverne1181 3 ай бұрын

Franchement, une très belle construction pleine d'astuces.

@Bespoke-creations 2 ай бұрын

Merci!

@JoeBlack9 3 ай бұрын

👍

@SCOTT-vm5nj 3 ай бұрын

I’m going to build a camper for my Toyota tundra and you guys are very inspiring! Thanks for putting this out there! Cheers 🥂

@Bespoke-creations 2 ай бұрын

So glad we were able to help!

@user-rj6vz1jz9j 3 ай бұрын

I love this design but please please take the music off so I can just follow what you are saying. It is very annoying!

@regen8218 3 ай бұрын

Good Job! I really like it.👍😀

@Bespoke-creations Ай бұрын

Thank you! Cheers!

@livinglifetothefullest22 3 ай бұрын

Hope l one day find a Kangoo or likewise conversion with a kitchen inside! Not living in sunny Afeica but in WET Europe it is quiet handy to have your kitchen inside...🙄🙄🙄

@Bespoke-creations Ай бұрын

Our kitchen is available inside! If you watch the entire video you’ll see how this works inside

@lawrencewallace4462 3 ай бұрын

Love this design and have so many questions! What did you use for your kitchen drawer runners? They look super solid!

@Bespoke-creations 3 ай бұрын

Thanks. The drawer runners are steel extrusions (square) that travel between skate board bearings. The extrusion are very common and easy to find in any DIY store. The bearings can be found online.