Cool❤

Do you have a part/model no. for the heatsink?? I went to replace my drivers and discovered one is missing the heatsink. Thanks.

Bonnie Barbey sings this, not Melissa DuVall

I hope and wish someone will make KARAOKE OF THIS SONG, wanna sing it, love the song so much🙏🙏🙏🙏🙏🙏🙏

Would the horn driver going bad cause the speaker to cut in and out?sometimes it’ll work for about 5 mins and then cut out and come back in intermittently

Excellent video thankyou for posting, it worked, however mine didn’t come with a heat shield. Is it necessary and could u point me to a replacement heat shield like u have…Thankyou

First and last comment? Come on! I can’t be the only one who likes this. Then again I am an 80’s baby.

Is there a minus one or karaoke of this song?

Good nite love the video but one question what's the name of replacing Twitter you used?

Can you repair diaphragm on the Alto 315? And if so do you have a video showing how to do it,

Good tip on the B&D screwdriver, I'll try and get one in the UK

Brilliant they cost a fortune to get fixed

Jazaak Allahu khairaa,sister ,prayers from,Rawalpindi,Northern Punjaab province,Islamic republic of Paakistaan.

thanks. I was wondering how to open these as my woofer came loose. Much appreciated. Now I know how to get in and tighten it

Hey man, would you know of a reliable better Tweeter I can use instead of this Alto junk Tweeter? I used my speaker to sing with, I also run mp3 music. I had them fix three times.. ENOUGH!!! But would you know??? Much appreciated

Dude this is hilarious. “Whether you turn it up at one end or the other”. Hahaha. Learn gain staging because it’s NOT the same

Too bad the music is so loud...

I have so much pressure and pain around my eyes. This really helps. Thank you so much!!!

I keep my speaker gain inbetween 10-11 oclock and I still burned my tweeter.

Thank you so much for this

Hola de cuántos rms es ese driver que trae esa caja

How much time I need to do this?

Thanks DJMARKPI ! helped me a lot !

Thanks so much man. Guy was gonna charge me €80 in total for the repair + part and I did it in 15 mins with this video :)

Thanks this helped me a lot.

are the lines on your alto's mono or stereo i have the 115a version nobody can tell me each line mono or stereo

she’s gooooood 🥰🥰

Hi does anyone know if it’s the same process for the ALTO TX15? The speaker looks very similar. Thanks

Hey man. You just saved me a lot of money. I can't thank enough for this tutorial.

One of my inputs on my Alto TS312 works and the other does not work any more. What would you do to remedy this?

If my alto speaker doesn’t make any noise but turns on does that mean my tweeters are blown out? I can’t eat any sound at all

You are at risk when using this quality

FYI: Alto's newest model (TS310, 312, etc) has an improved neo driver for high frequency production (part number HG00640), although I blew mine last night in my brand new TS312, after maybe 1 hour's use (I have four TS310's and they have worked seamlessly for the past 10-12 months). The downside of the heavier driver is that it's over $75 to replace, and that's if you do it yourself (the replacement process is the same as this video).

Alto are the worst speakers I have had. Very bad speakers. Dont buy them. Even thu you change the tweeter it will broke in less than 5 used of speaker

I'm about to order mine too for my TS212

Thank you very much in this song with lyrics,from Philippines

Simply incredibly!

I have a pair of Alto TS 315s and I would like to put some tweeter protections (PTC (Polyswitch or lamps or PTC and lamps together) to find the value of the PTC (1Ampere or higher) and the bulb (12 Volt or 24 volt and 12 or 18 or 21 or 35 watt) I should know the real power of the tweeter. La Alto reports that it is a 1.4 inch (35 mm) compression tweeter with 350 Watt RMS power and 700 Peak Peak. The crossover cut is 2Khz. To me they seem exaggerated values, and so I really want to know what power the tweeter has in RMS and so how many amps does PTC need and how many volts and watts does the light bulb have?

I would like to dedicate this song to my paternal grandmother. She died when my dad was a little kid so she could never see him marry my mom,but I think she would have really loved her,and especially my brother and me. R.I.P. Grandma👼

This prayerful song for a son really made me burst into tears

Thanks for the video 👍🏼

Do you know what kind of tweeter I would need for a ts315

My alto ts312 have the same problem, is that driver the same?

Excellent review and demonstration. Thank you for doing this. Question, couldn't the heat sink be installed on the new speaker while it's still out of the housing to make it easier?

Would anyone be kind enough to link some bigger appropriate tweeters, from amazon or ebay. Ones they know will fit.

Hey, where did you buy your "HF Horn Drivers Alto TS215s" at?

I wish I could find this song on Spotify or iTunes 😩

Hello, thanks for the video... Blew one of mine and ordered replacement but wondering did you add or replace the heat sink paste? If so what paste do you recommend? Thanks

If people think these speakers have 1250W or 1500W or even 2000W...yeah right. In your wet dreams. The amp draws 450W from the mains at full, efficiency is perhaps at 30%. Forget all this gazillion watts nonsense. More important is efficiency and sensitivity per 2.84V input. I suspect the TS212 is like 20W highs, 90W lows. Just got hold of Pyle 1" CD and B&C 1" CD, one as a cost effective solution for others, the more expensive one for my self (7 speakers to change the highs). I cant run them with the knowledge I have some 20gram 5W Neo tweeters in them :)

i don't understand how people blow there tweeters on these I've had mine just over 2 years and played them super loud one time i had them going at max just before clipping for about 7 hours and there still fine speakers have a clip light for a reason