Wow! Thank you, how do you get the white cheddar flavor? Just stick to it?! inquiring minds want to know😊
@M4Z1G12 күн бұрын
woah
@mary529218 күн бұрын
thanks fron Colorado!
@juhaszpeter4796Ай бұрын
Would this idea work with two laser lines? With the one in the levelers.
@alvarobyrneАй бұрын
might you have done all for laser cut, skip the 3d printing, maybe? great work!
@StarlynightlightАй бұрын
Why am I crying?
@rondlh20Ай бұрын
Thanks for the welding demo, very useful
@LeadDennisАй бұрын
you are so talented, Thank you for providing us with software as well.
@ScorchWorksАй бұрын
Thanks, I appreciate the kind words.
@LeadDennisАй бұрын
Please keep making videos.
@almahbara2 ай бұрын
شكرا
@DanielStolc2 ай бұрын
When I press initialize laser cutter it says there is a USB error, why is this?
@ninjazxd2 ай бұрын
I just printed one myself for the Hopper 30 but it wouldn't work no matter what I tried. It seemed like it wasn't wide enough. at the rear of the pull. I've seen where others in the comments confirmed it fitting the hopper 30 but maybe mine is slightly bigger. I guess the first print had an issue I couldn’t find so I reprinted it and it worked great.
@DennisdeLange3 ай бұрын
Coffee grinder works too for powdered sugar and/or salt
@kneedrabell48623 ай бұрын
❤❤ Loved your presentation. The beginning reminded of the Bionic Man starring Lee Majors. Thank you for sharing! Great content!
@GabrielSaboia-jl7nu3 ай бұрын
too slow
@GabrielSaboia-jl7nu3 ай бұрын
If it could maintain the folder you open files, and filetype, in the drop down menu it would be awesome!!!
@craigracummings3 ай бұрын
Similar technique without the frame: kzbin.info/www/bejne/nJ3aiI1nptJ-rqMsi=tGYcdR2k_GyAfBYc Good video though! Good method for large area!
@derekpatey11614 ай бұрын
how do you get the positioning light on please?
@ScorchWorks4 ай бұрын
This video covers the positioning light. kzbin.info/www/bejne/qGWql5eJaax3p9U
@derekpatey11614 ай бұрын
@@ScorchWorks Thanks mate much appreciated
@radharanidutta33764 ай бұрын
Bro i can't make 3d model of nodes can ypu please suggest buying link
@KalinStanishev4 ай бұрын
I have a problem with the rotary settings. I have allowed the rotary use but when I turn the laser on it either doesn't find it (USB error) or it keeps spinning and doesn't stop (as if it's looking for the home point). So far I have not found any solution to this.
@ScorchWorks4 ай бұрын
Pushing the gantry up to the y end stop switch will stop it from spinning.
@SB-gl4lh4 ай бұрын
you should sell these!
@stevechopping30215 ай бұрын
I have only had a K40 for about a year but K40 Whisperer is great
@Drtai0075 ай бұрын
Anyone watching in 2024?
@narchitek5 ай бұрын
Thanks for this! I had a friend print me out the file and it worked great as a replacement zipper. I had to use an M3 nut and 18mm M3 screw. But it works perfectly. Glad I didn’t trash my yeti! Shame Yeti doesn’t offer something like this to help their customers.
@Suzukimarshall5 ай бұрын
VTEC kicked in
@yamlcase2305 ай бұрын
Please tell me the Slow Mo Guys are gonna film this
@theConservativeTAKE5 ай бұрын
will this work with a/c?
@vlaimereputten41815 ай бұрын
SHIFT + CONTROL + R
@GisellePadilla-jt6qh6 ай бұрын
How To Make Popped To Air Popcorn Salt Stick
@such_a_delight97486 ай бұрын
Omg this problem has been plaguing me for MONTHS. What a great solution.
@derekdonahue56336 ай бұрын
Most of the work seems to be figuring out how to make a sifting contraption out of the cage wire and wood to do this. That's the part I'm struggling with right now. Has anyone figured out a site where you can buy something to staple the fencing onto? This idea isn't talked about enough and it's exactly what many people need to do. Thank you for making this video.
@mulyadimaksum79316 ай бұрын
Hello, thank you for the information and your video, I also have a laser machine that uses K40 software, and I am oversize the working area , But it requires a large motor power, so I made a gear ratio..After that the laser can run smoothly. But after entering the scale settings I encountered a problem... If I make a square object the results are accurate... But after making a circle object, the results are very weird, this is not oval shape or anything else.. on x Axis the diameter is correct but on y Axis the diameter u correct...
@mulyadimaksum79316 ай бұрын
Do you have solution
@ScorchWorks6 ай бұрын
Can you e-mail what a circle looks like to the e-mail address in the help menu? I am guessing something else is going on with your machine.
@mulyadimaksum79316 ай бұрын
@@ScorchWorks thank you.. i Will send the picture..
@mulyadimaksum79316 ай бұрын
@@ScorchWorks .I've sent some photos and a description of my machine. I hope you can provide a solution to my problem... thank you and good luck forever
@privacytest91266 ай бұрын
This is fantastic - how have I only just found out about this after all this time?! Thank you so much. 🙂
@The1200mike7 ай бұрын
Just what I needed, Thanks!
@aeonjoey3d7 ай бұрын
Oh MANNNNNN now I have to build on of these now that I've seen it's genius implementation, THANKS, ugh giving me work to do. haha, thanks for this video, I was wondering what I would need to do to clean up this xeriscaping
@fjmplsma7 ай бұрын
The zippers on these yeti coolers as are ridiculous Even brand new it is hard to open the lubricant doesn’t do much Sure enough one year in and it’s broken Will not buy a yeti with a zipper again
@TracyCady7 ай бұрын
I didn't have the materials to build the frame out of wood. So I ziptied the landscape fence to the top of an indoor dog kennel. And hosed it off. I let it dry and the wind blew the debris away. I had to pick out a few things by hand but not much.
@ScottishAtheist7 ай бұрын
Honestly, brilliant. I have been using a griddle, it takes SO LONG.
@playmkr2787 ай бұрын
Did you use a CNC router and what do they cost. I know prices vary but I wanted to get one exclusively for puck engraving.
@ScorchWorks7 ай бұрын
My machine is pretty unique and purchased second hand years ago. Any cost info about my machine would be useless (I paid $1600 which would be a steal for a comparable machine today)
@warpig3727 ай бұрын
I'm going to use the same method but i will be laying a tarp underneath so i can drag the dirt away when im done.
@aborntexan8 ай бұрын
Super cool! I gotta try this! I just stumbled across F-engrave last night. Did some vcarves with it this afternoon. It worked great. Thanks for creating this tool.
@Tinyteacher11118 ай бұрын
Thank you for your advice! Right now, I wish I had a handy partner, didn’t have health and back problems, weren’t a perfectionist, 4’ 9”, pushing 70, and didn’t have an issue with what was a beautiful yard in Michigan! I have stone beds that are in an L shape, with really cool stones that have fossils, Petoskey stones, sparkly stones, etc. I realized they were growing weeds, baby trees, and roots were coming out. I started to inspect, and found a mess! There is heavy plastic underneath, but huge roots, like trees, grew from somewhere, and poked holes in the plastic, lifted it up, and now I have two layers of dirt and roots intermingled with stones I need to free (and free the big worms above and below the plastic), sift and clean the stones, build up the dirt, level, replace the plastic or use sand or something to lift it higher. I’m breaking my back pulling everything out and cutting long roots with loppers, cutting little roots, moving the worms, trying to figure out what to fill the dirt in with, and looking on You Tube to see what to do. Now I guess I’ll have to build a sifter, sift, wash, level the dirt, put more plastic or paver sand down, and replace the stones. It will take me until the end of the summer! Oh, boy!
@Cowboydjrobot8 ай бұрын
This is great, im trying to remove all of the rocks in my yard and this would be a great way to do that without throwing away the soil
@CL-me3ip8 ай бұрын
It's such an incredible software!! It's working perfectly! (v.0.03) Big thanks!!! You saved my life LOL! Especially it doesn't need to be installed. (Talking about those annoying .msi installers and no admin rights) If I have to find some problems, they are: 1. It costs a lot of memory (around 6GB?) when loading two PDFs (50ish pages)? 2. I hope if there are previous/next page buttons too. BTW, your website is a place where saves all the treasures!
@ScorchWorks8 ай бұрын
1. You can turn the resolution down to save memory (will result in lower quality image) 2. PageUp PageDown on your keyboard works for previous/next page.
@CL-me3ip7 ай бұрын
@@ScorchWorks Awesome! Thank you so very much for this app! This is actually saved my time and my brain on comparing the different version of drawings.
@ayidas8 ай бұрын
It worked!! Thank you!!
@ThomasKelly-p2p8 ай бұрын
You don't need a blender to grind salt and dried seasonings... You can also use a mortar and pestle! 😂
@ThomasKelly-p2p8 ай бұрын
You don't need a blender to grind salt and dried seasonings... You can also use a mortar and pestle! 😂
@ThomasKelly-p2p8 ай бұрын
You don't need a blender to grind salt and dried seasonings... You can also use a mortar and pestle! 😂
@ArturNowak-fd6dg9 ай бұрын
Witam graweruje mi odwrotnie kropka jest po prawej zamiast po lewej
@ScorchWorks9 ай бұрын
Sounds like you need to select "Home in Upper Right" in the "General Settings". This setting is for machines that have the home position in the upper right corner (not in the upper left corner)