I use it pretty often and enjoyed making it so not a time waster for me.
@ClRobite22 күн бұрын
I do not think you gave an honest review of this vector auto heat press comparing it to just Cricut heat press which I love . Years to me it was a learning thing but I have used it works great for me your-must have missed the pressure part and yes I wish it had more but a cardboard under neath sometimes I do it twice but my t shirts turned out great. So you recommending not buying it is not fair. I have shoulder problems that is why I decided to try this kind of heat press but you just comparing it to the Cricut heat press just was not fair I have had other videos say they had problems with it , but they had used others to compare but still think this could be just adjusting to how it works.
@TheresaBDIY21 күн бұрын
I only have the Cricut press so I don’t have the ability to compare it with others. My HONEST review is only based on my opinion. I’m glad to hear that you found a way to make it work for you.
@ClRobite22 күн бұрын
Sometimes if in doubt i press twice and but a cardboard under neither padding
@sajaabdelaziz288424 күн бұрын
I I
@rebeccabledsoe455025 күн бұрын
I love to craft do a variety of crafts
@TheresaBDIY21 күн бұрын
It keeps things interesting!
@rhondalovett7797Ай бұрын
Well, like everyone else I can’t get this machine to work properly. I have heat pressed a couple T-shirts after extensive problems. Now, yesterday, after he pressing a T-shirt, this machine will not respond to any buttons that I want to push. The lights are showing under temperature just the top triangle on the top of it looks like888 and then it’s showing and then it’s showing count and mode and the mode is flashing and it’s beeping I tried turning it off. I don’t know what to do. Have you heard of this problem before? Do you know what to do get back to functioning.
@TheresaBDIYАй бұрын
I wish I could help. I ended up donating the press because I was never going to use it.
@celticwarrior777Ай бұрын
The blue should be dry first. Then do the waves yes
@TheresaBDIYАй бұрын
That’s not how I do it but it’s a way to do it
@celticwarrior777Ай бұрын
Its a heat gun with a fan?
@TheresaBDIYАй бұрын
Nope, just a heat gun with a more narrow nozzle
@EverleeWunderlichАй бұрын
Blue
@rhondalovett7797Ай бұрын
I have this machine and cannot make any sense of the instructions that comes with the machine. Is there anyway you could send me instructions in your own words how to set the timer and the temperature? Thank you so much in advance for anything you can do to help me to get this up and running.
@TheresaBDIYАй бұрын
I wish I could help. I ended up donating the press because I was never going to use it.
@barbarajenkins8050Ай бұрын
So sorry that I missed your live. I was on WhatNot, lol. I look forward to your premier there. Sammie added large IOD transfers to a piano roll and it turned out beautifully! See you tonight. Best of luck!❤
@TheresaBDIYАй бұрын
Thanks 😊
@lindahutchings5394Ай бұрын
Sorry, I missed the live. Looking forward to projects. I did buy a wooden chest to make a sewing box. Hobby lobby has some great sales.
@chandazargo2302Ай бұрын
Hey Theresa, good to see you and going to try to make your What Not show tomorrow night!
@TheresaBDIYАй бұрын
So true!
@Fluids-creativityАй бұрын
👏👏👏
@michellesuniqueboutique3405Ай бұрын
Beautiful Thersea!!! I am wishing for cooler temps, being from south Alabama I know u can relate seeing that you are in Florida. What part of Florida are you from again? I have missed watching you. Hope things are good. Take care n happy creating
@TheresaBDIYАй бұрын
Thanks Michelle! I’m in Orlando
@lindahutchings5394Ай бұрын
Love fallish ideas!
@simplyme16102 ай бұрын
Wooow ❤ what a beautiful idea ❤ all signs looks so beautiful ❤❤ perfect stencils art ❤❤ you are super talanted ❤❤ thank you for sharing my dear friend ❤❤❤
@TheresaBDIY21 күн бұрын
Thank you so much 😊
@30inon2 ай бұрын
Hi Theresa, really cool video and the result is absolutely amazing! I tried to do the same thing exactly, but it all went so messy and blurry, I didn't make it to the foam stage, where it gets the cells and all that realistic appearance. I'm so confused. Like, what am I doing wrong? I'd be thankful if you could give me some tips and advice. Thanks🙏
@TheresaBDIY21 күн бұрын
Just more practice
@jbird732 ай бұрын
You know da rulez
@HeIsYourRisenChrist2 ай бұрын
As for the audio volume, I didn't have a problem w/it. It was fine for me😉
@HeIsYourRisenChrist2 ай бұрын
Hi Theresa, I think all of your work is beautiful✨ How lovely that you chose bible verses, they all make quite the statement. I love the stain color of #1 the whole thing came out great, really good work👍🏼and #2, reminds me and looks like material, that was a great choice with the striped paper, you did it so straight and the lettering came out great in black👍🏼Your faith sign is gorgeous, the green color for the lettering is perfect👌🏼 It's too hard to pick a favorite, they're all so nice😊I think maybe I'm leaning towards Proverbs 16:24, I really like how the white lettering stands out against the dark stain. Stay blessed and keep up the great work🫶🏼
@michellesuniqueboutique34052 ай бұрын
They all turned out great Theresa! Thanks for sharing. Good to see u on here. Take care
@kathyray81652 ай бұрын
Thanks for the inspiration!! ❤ working on scrap wood ❤
@barbarajenkins80502 ай бұрын
Beautiful ❤
@TheresaBDIY2 ай бұрын
Thank you Barbara!
@denakennedy67522 ай бұрын
Please turn up the volume! 🙂
@TheresaBDIY2 ай бұрын
I definitely will on the next video. I don’t think there is anything else I can do to it now.
@lindadelira88082 ай бұрын
Volume is very low on my end too.
@lindadelira88082 ай бұрын
Audio not volume. Sorry
@TheresaBDIY2 ай бұрын
I wish there was something I could do on it. I will make sure to turn it up on future videos.
@tracyknight51862 ай бұрын
Your audio is very quiet 😕
@TheresaBDIY2 ай бұрын
Oh no, I just checked it and it seemed ok on my device
@SecillyJonesandKids2 ай бұрын
Sounds normal on my device as well. @@TheresaBDIY
@CatherineMERCIER-fl7hq2 ай бұрын
Bonjour, comment vous réglé la température et le temps? s'il vous plait
@judyromano22292 ай бұрын
I've yet to see a good review on this one. I've seen 2 comparison videos with it and HTVRont. The ront won, hands down. I love my ront and the cost is great
@silkeschumann72612 ай бұрын
The Vevor according to the first two review videos I watched has pressure issues and a slightly uneven temperature where it is a tat cooler at the back. Pressure surely can be fixed with adding height to the bottom with bookbinder cardboard, or a few posterboard sheets or wood panels, a pizza paddle or some such things somewhere in the house or next crafters store as well es thick stiff felt plates.
@tinataylor93273 ай бұрын
Vevor offered to refund $144 or send new machine. I said I’ll take the $144 refund. Thank you.!
@TheresaBDIY3 ай бұрын
💯 take the refund! Glad you were able to get it!
@tinataylor93273 ай бұрын
The struggle is real with this one! I posted comments on Katrina’s page also. I haven’t even been able to use it to press a project. Plastic shipping material was electrical statically stuck to the top of the plum unaware to me, so when I turned it on to start testing the functions, I’m seeing smoke and plastic smell. Turned it off let it cool down cause I figured. OK that’s just expected. It wasn’t until I was going through the manual again and on the back page is where they tell you to remove that material which it wasn’t on the silicone mat when I went to add the handle. My set up button does not work. I’ve been emailing their support since I purchased the machine on May 23. I’ve since asked them to either return or credit my money because it’s already past 30 days. They told me to press I could wipe off the melted plastic, which you can’t! The other day they responded they would be willing to send me $24 which I responded was absolutely ridiculous. Then they offered $75. I told him I want at least half my money back.🤬
@TheresaBDIY3 ай бұрын
Oh my! That’s horrible! I’m so sorry you had that experience!
@MsCree013 ай бұрын
I think it pays to read the manual first
@TheresaBDIY3 ай бұрын
Thanks, I did read it but it wasn’t written the best.
@Teesocrafty3 ай бұрын
I think you may need to increase the pressure or using a pressing pillow. Fellow Content creator
@TheresaBDIY3 ай бұрын
I’ll have to try! Thanks
@robinbuchanan42483 ай бұрын
that helped me a lot
@TheresaBDIY3 ай бұрын
I’m so glad!
@joyaclub3 ай бұрын
Seems like the HTVRont is the better choice.
@TheresaBDIY3 ай бұрын
I’ll have to look at it! Thanks
@TheHanyou3 ай бұрын
Vector? That's a new way to say their name. Granted, no one seems to know how to say Vevor anyway lol
@TheresaBDIY3 ай бұрын
I definitely said it wrong lol
@blueemeraldcreations-sandr61213 ай бұрын
From what I understand, there's 5 settings for pressure. P1,p2,p3,p4,and p5😊
@Teesocrafty3 ай бұрын
@blueemeraldcreations-sandra6121! Hey Ms. Sandra yes you are correct there are 5 settings.
@TheresaBDIY3 ай бұрын
Thanks!
@Bionicbabyy3 ай бұрын
Its not you. Someone else was having a similar problem as well. When you opened the item did you have to remove a plastic piece or sponge in the middle under the press plate?
@TheresaBDIY3 ай бұрын
I can’t remember but I did check it the other day. Thanks for trying to troubleshoot with me ❤️
@darlahpotechin16683 ай бұрын
I am finding that all auto presses are a learning process. I guess the same goes for a manual. I keep a book on each blank with which autopress or manual press. I find the auto presses most often need pillows to increase pressure despite the clearance. You do waste blanks with a new press due to the learning curve. I do have the htvront, original vevor autopress and the Cricut autopress. The Cricut autopress doesn’t seem to need pillows with tshirts but I have not been able to test it much. It won’t engage unless I lock it other than 4 times. I have had a ticket in on it and I had to jump through many hoops 8 videos and now they are not responding. It’s my 1st experience with Cricut getting an item that doesn’t work. I am not impressed. I do buy vevor products and all directions are - well lacking. They do need help with proper manuals. Once you figure out how to adjust pressure on a manual I find it easy but adjusting pressure is a learning curve. The manuals usually they are larger - mine is a 16x20 and I find it useful to have size. I suspect your issue was pressure not time or temp. Best press I had years ago was a pneumatic press till it died. They don’t make it any longer. Sigh
@Teesocrafty3 ай бұрын
That doesn't sound like a bad idea because it is a learning curve. Even as a content Creator I find the manual hard to understand sometimes. I will def start keeping a book with all the times and temps and pressure etc.
@TheresaBDIY3 ай бұрын
Thanks for the comment 😊 seems you have quite a lot of experience. Sorry to hear about your trouble with the Cricut.
@tecisme47533 ай бұрын
I watched another video on this heat press. She had problems also. Did you calibrate the heat temp? I have a cheap infra red temp gauge that will get you close to an accurate temp setting.
@TheresaBDIY3 ай бұрын
Thanks for the tip! 😊
@ArieHugz3 ай бұрын
Because each heat press is different sometimes using the recommended settings for blanks isn’t always ideal especially with this lemon of a machine. I would recommend more heat and firm pressure to do those mouse pads thingees. PS this heat press is a fail for me
@ArieHugz3 ай бұрын
Because each heat press is different sometimes using the recommended settings for blanks isn’t always ideal especially with this lemon of a machine. I would recommend more heat and firm pressure to do those mouse pads thingees. PS this heat press is a fail for me
@TheresaBDIY3 ай бұрын
There are probably some pressure settings somewhere but the instructions are horrible. lol
@nahnisjourney14063 ай бұрын
Katrina’s Graceful Creations just reviewed it as well, and didn’t have good results. I hope you both can get it figured out. Maybe contact VEVOR and get better clarification on how best to operate their auto press. Also, let them know about the crack at the bottom front of the press. Who wants a press with a crack in it? Not me. After watching Katrina’s video, I decided to search for orders who are reviewing the same auto heat press. That’s hide I landed on your page. New Subscriber.
@TheresaBDIY3 ай бұрын
I reached out to them about the crack when I received it and didn’t hear anything back 🤷♀️ I don’t think the crack poses any issues with the machine but I doubt that I will ever use it so it’s going to get donated.
@Teesocrafty3 ай бұрын
Hey @nanhnisjourney1406 I hope this press isn't gonna be problematic. How are you?
@nahnisjourney14063 ай бұрын
I thought it was a “VEVOR” auto heat press. Is VEVOR made by VECTOR?
@TheresaBDIY3 ай бұрын
I think you are correct, it’s definitely Vevor.
@UshasRides3 ай бұрын
The different modes are for different pressures... although honest, having seen how crazy fiddly it is to adjust temp and time I've lost interest in this one. Thanks for the review.
@TheresaBDIY3 ай бұрын
Yes, exactly! They are probably there somewhere lol