I'm not clued up enough to give you a definitive answer on that. You're best getting in touch with CANformance so they can let you know.
@Irandal3 ай бұрын
Hey, great job ! Quick question : how do you manage to get the rpm to your original cluster ?
@laurenceandthemachine2 ай бұрын
That’s all done with the Discovery 2 dashboard controller from Flatcap engineering. All sold through House of Torque.
@BMW-whatever3 ай бұрын
What was top speed?
@laurenceandthemachine2 ай бұрын
Not sure what we had whilst going round the ring but Ive had 130 quite easily on the autobahns before.
@guntars52813 ай бұрын
Some dude pops up on KZbin saying he is going to put 8 speed BMW transmission into Disco 2. Me-sub.
@sergeifil69903 ай бұрын
Land Rover discovery 2 ty n57 Engine Conversion?
@danielsharkey46273 ай бұрын
Did you have to cut the bell housing for the starter motor?
@laurenceandthemachine3 ай бұрын
Yes the bell housing needs to be cut. House of torque have since brought out a nice 3d printed cover for this.
@sb1980s4 ай бұрын
Great video mate, Ive just had my gearbox out. Any tips for getting the transfer case back in? I’m one man on a driveway.
@laurenceandthemachine4 ай бұрын
Ah driveway working is hard. Best bet is to get it on a jack and get it into position that way. The hardest bit is locating it on the shaft so just turn the propshaft flanges until it goes on. Thats just one of those things that gets easier the more times you do it.
@DE4N6664 ай бұрын
God I wish I had lads and a garage I could do this with. Would love an m57 auto in my puma 90
@laurenceandthemachine4 ай бұрын
We’ve done plenty of those! They drive so much better!
@MarkWright19635 ай бұрын
How do you make a Land Rover owner happy? Make it a BMW!!!!
@mohamedalharthi12705 ай бұрын
🤩🇰🇼 i have 2004
@benfel94036 ай бұрын
Fascinating! Thinking of welcoming a Disco 2 back to the family so this is just what I needed! Ace !
@BJ-kn2te6 ай бұрын
Well that was like watching paint drying
@eversleyowl6 ай бұрын
I drive a Jeep rather than a Land Rover, but still really enjoy the videos even though some of the content is not directly applicable to me. Keep 'em coming!
@Rico010006 ай бұрын
Ah yes, this was mine in December 😂
@dr.crimper17336 ай бұрын
Better music and more dust/eye protection to keep you safe for a long life with family
@lesbrock67196 ай бұрын
What size Jasic are you using Bud ?
@laurenceandthemachine6 ай бұрын
It's a Jasic 200. Brilliant little welding. Not found a better welder yet. Makes a bad welder look good!
@lesbrock67196 ай бұрын
@@laurenceandthemachine Looking to upgreade mine was thinking of R-Tech but will give it a look cheers
@almiller23516 ай бұрын
Like the video mate, enjoy watching the work! Not as keen on the music but that's just me!
@gerardbooth406 ай бұрын
I have it on good authority that 'Mrs Machine' isn't so keen on dust! Anyway, as an old Jag fan, I feel your pain.
@djwaxstyles16 ай бұрын
Did you lose the off-road gearing from the new ECU?
@laurenceandthemachine6 ай бұрын
Do you mean low range? If so, no. A few have asked this question but my low range and diff lock is operated by compressed air so all you have to do it flick a switch to put it into low range
@metlhamokwena25436 ай бұрын
Great content. Just an observation that you seem to have removed the transfer box shifter. Does this mean this conversion will mean doing away with the 4 wheel drive!
@laurenceandthemachine6 ай бұрын
The diff lock and low range in my car are all powered actuators and compressed air. Instead of messing with levers you simply turn a switch.
@user-ln1ml1py7c6 ай бұрын
Low range?
@laurenceandthemachine6 ай бұрын
The diff lock and low range in my car are all powered actuators and compressed air. Instead of messing with levers you simply turn a switch.
@adelkandil40696 ай бұрын
Hi mate thanks for a great information mate I got a quick question I have dis2 but I am planning om606 turbo mechanical my question if I have to fit zf8hp how could that be controlled any advice would be much appreciated.
@laurenceandthemachine6 ай бұрын
I would say the best people to speak to is CANformance Engineering. They will have more info than I do.
@MePeterNicholls7 ай бұрын
I’m really impressed by your abilities tbh. There’s stuff I want to do. But a) no shed b) don’t know enough! lol. Currently working on L322 on a drive way. 🫣
@Ankeneering7 ай бұрын
How the hell is the underside of a UK Land Rover that oxidization free???!
@Chumley3607 ай бұрын
Very interesting swap. I noticed you don't have a range selector in the console, what are you using to shift the t-case and does it also work your center lock?
@laurenceandthemachine7 ай бұрын
Hi yes. All the hi-lo and CDL is controlled by actuators and compressed air. So its it’s just a switch these days. Miles better than fighting with levers.
@Chumley3607 ай бұрын
@@laurenceandthemachine Awesome.
@murrayblair677 ай бұрын
Beautiful conversion Lawrence!👌 I’m off to loder a bunch of stuff from House of torque!
@tanko7127 ай бұрын
Hi, how did you get the dashboard to display RMP, Oil level, water temp? What's the trick with the wiring?
@laurenceandthemachine7 ай бұрын
Your best bet is to buy a Flatcap Engineering dashboard controller from House of Torque. Pretty much a plug and play box and makes the entire dashboard convert to the correct readings.
@user-ju6hj3no4m8 ай бұрын
Brilliant x x
@SilveriusPurbaDocsilHistory8 ай бұрын
Nice one let's celebrate together 🎉😂
@gaynorstones73988 ай бұрын
Made me cry 😢
@laurenceandthemachine8 ай бұрын
Happy tears we hope!
@sleepycatpictures11768 ай бұрын
Nice one! Merry Christmas!
@JimBiddle.8 ай бұрын
Great video, had me thinking of chopping in my stroppy D2 for a D1, always loved the Trophy colours. And the end, classic.
@danehank8 ай бұрын
Love it😂
@titantechph97119 ай бұрын
just wnated to ask discovery 2 to m57 where did u get the mounting kits? thank you
@laurenceandthemachine8 ай бұрын
Hi mate, I made all my own engine mounts and gearbox mounts. Easy job really, It's just making sure to get the engine in the rightplace so that the transfer box will still fit on as it's longer overall than that td5.
@titantechph97118 ай бұрын
Thanks mate great build!@@laurenceandthemachine
@eversleyowl9 ай бұрын
Really enjoyed the series. Must have been a challenge to film and participate at the same time! I hadn't realised this was an open event, had thought it was just members of your club. Is it Landrovers only or could we bring a team of Jeeps?
@laurenceandthemachine9 ай бұрын
I must admit I'm not well up enough on the rules of the game to say whether you could bring a set of jeeps. If you email [email protected]. They will be able to get you an answer.
@eversleyowl9 ай бұрын
Some great one liners, my favourite was "even the runs are dry", pmsl.
@danehank9 ай бұрын
Well done Laurence! I thoroughly enjoyed that series👌🏻
@philbeehag29969 ай бұрын
Hi Laurence. Nice Discovery. What engine mounts did you use. Was it a straight bolt in or did you have to weld in new engine mounts? Phil
@laurenceandthemachine9 ай бұрын
For my engine swap I have made custom engine mounts. With this I could then mount the 6hp and 8hp box as seen in the video linked below. kzbin.info/www/bejne/aH7Rk3yYmcqLf7c I've had a lot of people asking about the conversion, maybe the next one I do will be filmed so everyone can see the job.
@philbeehag29969 ай бұрын
@@laurenceandthemachine thank you. Keep up the great work. Love this Discovery 2.
@JimBiddle.9 ай бұрын
So, I've just bought a Disco2 TD5 from a mate, he's spent many monies on it, but I'm thinking of an engine conversion like you and your brother have. Would you rate them over any other conversion?
@laurenceandthemachine9 ай бұрын
I would definitely recommend this conversion. especially with the 8 speed too. Did you see the video on the 8 speed swap?
@JimBiddle.9 ай бұрын
@@laurenceandthemachine Yes, I'm working my way through your videos. Thanks for taking the time to reply. Appreciate it.
@andrekaru69219 ай бұрын
Very good video👌, I also plan to change the engine for my disco 2, but what type of M57 engine did you install? M57 184/193hp control vacuum, M57N 204hp euro3 control vacuum, M57N 204hp euro4 control electric, M57N 218hp euro3 control vacuum , M57N 218 euro4 control electric. One more question, which F series 8speed transmission did you put under. Thank you!
@laurenceandthemachine9 ай бұрын
I originally fitted the M57N 218hp Euro 3 vaccum controlled but now it is mostly electric controlled thanks to the DDE6 controller. The gearbox I used for the 8 speed swap was the 8HP70x.
@andrekaru69219 ай бұрын
Thanks👍
@andrekaru69219 ай бұрын
Hi, now I'm looking for a gearbox and the bmw f series, only gives me GA8HP70Z, is it the same as GA8HP70x?
@laurenceandthemachine9 ай бұрын
I'm not well up on the exact codes for this. But if you email [email protected] they will sort you out with what you need. They may even have one in stock.
@jacquesdewet26617 ай бұрын
@@andrekaru6921 - I'm taking a wild guess here, does the "x" stand for x-drive?
@MarcoBoom9 ай бұрын
Did you think thats its Possible to fit an 8HP to an 2006 Range Rover Vogue 3.6 TDV8 ?
@laurenceandthemachine9 ай бұрын
Hhmmm I couldn’t be sure on that one. It sounds like something that could be done because they have the 6hp fitted I believe?
@MarcoBoom9 ай бұрын
I checked the hole Internet and cant find anyone done this. Jea the 3.6 tdv8 Had the 6hp26 and the 4.4 tdv8 Had the 8hp i cant affort the 4.4 so i needed to buy the smaller one 😅
@user-nd6tj5ci7o9 ай бұрын
Is it possible to know the cost of the engine, gearbox, all necessary parts, and the cost of manual labor?
@laurenceandthemachine9 ай бұрын
For this, you’d best to speak to House of Torque. He has a team that will do the conversion for you and they will be able to give you more accurate costs.
@przemo75509 ай бұрын
gearbox?
@laurenceandthemachine9 ай бұрын
Hi mate, when we did this the car had the 6HP-26 in it, which was good but have a watch of our video where we put an 8 speed in it. They are something else... kzbin.info/www/bejne/aH7Rk3yYmcqLf7c
@Cchange4us9 ай бұрын
Hey mate, did both the standard transfer case chassis mounts still work?
@laurenceandthemachine9 ай бұрын
They did for me because mine was already converted. When I did the engine conversion I changed the transfer box mounts but not by much. Couple if inches if that.
@Cchange4us9 ай бұрын
Great work. I'm considering using an 8hp with my D2a om606 swap. One concern i have is that the box will have too many gears - being honest, do you actually find yourself using 7th and 8th?
@laurenceandthemachine9 ай бұрын
Oh yeah 7 and 8 are great cruising gears. Keeps the revs at about 2000rpm at 80 mph. Just nice for fuel consumption.
@trilhoscdtm9 ай бұрын
How do you engage the low gear?
@laurenceandthemachine9 ай бұрын
Hi mate, all the diff lock and low range selection is done with compressed air and actuators on my car.
@the_hamrat9 ай бұрын
You're a mad lad and I love it!
@davepreece56329 ай бұрын
I’ve searched the internet and can’t get an answer I want to do this sort of swap but have no knowledge of mechanics do u know of anywhere I can drive to have all the work done and hand over cash and if so what would be a ball park figure thanks for any help 👍🏻
@laurenceandthemachine9 ай бұрын
Hi mate, if you're serious about having a conversion done send me an email at [email protected] and I'll put you in touch with some guys I know do a good job.
@stuartbowler752610 ай бұрын
Nice video, very interested in the Disco 2 M57 conversion. I am partiuclarly interested in the original conversion you did and how much fof the original Disco 2 wiring you kept? Things like fuse box, bpdy wiring etc. There doesnt seem to be alot of Disco 2 info online, most people are doing it to defenders.
@laurenceandthemachine9 ай бұрын
Hi mate, all the d2 wiring stays the same barring all the plugs that go to the engine thanks to the house of torque control boxes which you can find on their website. We have done all types of conversions and I would say the d2 is one of the hardest due to the tight space in the engine bay and trying to make the interior look half decent but whilst it is hard, it is defintely worth the conversion, makes a world of difference keeping up with Golf R's!
@stuartbowler75267 ай бұрын
@@laurenceandthemachine This is great. I am hoping to rechassis my disco 2 at the same time as the conversion. does the m57 sit in the right place to mount to the td5 mounts on the chassis?
@laurenceandthemachine6 ай бұрын
@@stuartbowler7526 I made my own chassis mounts but I'm pretty sure you can buy some engine mounts to make it fit with the td5 mounts.