That's a good-looking knife. I have 2 Sitivien, and both are great values. Thanks for the video.
@nerv5th2 күн бұрын
The 144, 146, and 147 look similar; they probably had the same designer. Thanks for watching and have a nice day.
@zealotzealot48486 күн бұрын
Great knife
@plaguedoctor56397 күн бұрын
What do you think are the best files for removing sprue marks? Would you recommend the army painter files or the citadel files?
@nerv5th6 күн бұрын
I have both, but I use the Citadel mold line remover tool, a scalpel knife, and some fine sandpaper in most cases.
@elonex7777 күн бұрын
Thanks a lot the latest maps are still not released as digital versions. Please could you also do the End and the Death volume 2 and 3 maps. I know the 2nd is the Vengeful Spirit but there is no single full image of it anywhere...
@nerv5th7 күн бұрын
Yes it looks like they did not update the website for a while I will try to buy the rest of the maps when they are released. I'm not sure when they will be released probably next year. Thanks for watching.
@bmoviebmovie7 күн бұрын
Thanks for reviewing. Had no idea this one was a smaller sized Two Sun.
@nerv5th7 күн бұрын
Very inexpensive and long-time-forgotten small tanto folder. I have founded it a year ago. Thanks for watching.
@JeremyK-f3b7 күн бұрын
You should be very happy that buck is the older model much better than the new buck lite
@JeremyK-f3b7 күн бұрын
I have one from 1994
@JeremyK-f3b7 күн бұрын
You’re knive is 2011
@JeremyK-f3b7 күн бұрын
Sorry didn’t hear you say 2011 so you all ready looked it up
@nerv5th7 күн бұрын
@@JeremyK-f3b Yes Thanks for watching.
@jasonthompson85108 күн бұрын
My knife doesn't work
@ReligionAndMaterialismDebunked9 күн бұрын
Nice. The exact one I've wanted. Hehe. Shalom.
@woodentulike2no11 күн бұрын
Thanks for this nice review I just picked this knife up at Walmart today and I'm very pleased for 35.00 and I must say you have a very nice collection of folding knives my friend
@nerv5th9 күн бұрын
Thank you for watching I hope you will enjoy your new knife and stay tuned for more videos. Have a great day.
@mojavedesertsonorandesert953111 күн бұрын
This is nice! 👍🏼
@billboppre734511 күн бұрын
WHy are you wearing gloves??
@nerv5th11 күн бұрын
To keep the knives clean. Thanks for asking.
@mojavedesertsonorandesert953111 күн бұрын
Why does it matter?
@Wcquick16 күн бұрын
Fun budget EDC knife review, good looking products. Good channel, liked and subscribed
@nerv5th16 күн бұрын
thanks for the sub
@nealjohnson830916 күн бұрын
Sitivien knives are great cheap knives. Well built and very good action. The blade steel is budget steel so don't expect to much but it's okay. Buy the ones with jade g10 scales and dye them different colors to add flair to them.
@jamescullum541217 күн бұрын
Thanks Patrik!!
@nerv5th17 күн бұрын
Thanks for watching James.
@ix875018 күн бұрын
Im considering buying a grey feather milled pattern TR-4 with a Magnacut blade. I own a standard black aluminum protech SBR and I love it so much it has made me always want a larger protech model. Originally I was just going to go with the big brother Rockeye but something about the TR-4 really seems like I will enjoy it more so i am watching a few vidoes about it before I decide.
@nerv5th18 күн бұрын
Les George has great knife designs the SBR and also the Rockeye look to me great but for me the TR-4 like you did say speak more I fell in love with the ergonomics it has great size and fits so well in the hand. I recommend that you try it out in person that is the best way how to proceed it is not a cheap knife so better be sure. Thanks for watching and have a great day.
@mario918119 күн бұрын
How long does the lume last? It is not Swiss Superluminova thats why i asked
@nerv5th18 күн бұрын
I would compare it to Seiko Lume it will shine for some time but not all night. Thanks for watching.
@mario918113 күн бұрын
@nerv5th it's not so good as Lumi Brite cause on my Darth Tuna it lasts all Night,and Superluminova on Laco,Phoibos.....it lasts definitely all night. Thx all I wanted to know. Is it true that it's got a Ronda 515 Quartz movement?
@nerv5th13 күн бұрын
@@mario9181 Sorry I don't know what quartz movement is inside and unfortunately my stopped after around 3 years.
@JohnPaul-ve4pg22 күн бұрын
That’s a Ti isn’t it?
@rubencortez919822 күн бұрын
Nice!
@bmoviebmovie23 күн бұрын
You did not comment about that monkey head stamped onto the non-show-side of the handle. Is that a "faker mark" or is that something to expect from a Spartan Harsey variant.
@CNYKnifeNut23 күн бұрын
That specific version is a fake of a Monkey Edge exclusive. That's Monkey Edge's logo. Edit: supposed to be* monkey edge's logo, I guess is more correct.
@nerv5th23 күн бұрын
Yes I forgot about the monkey that is a dealers exclusive version. They faked the basic model and the best collaboration one the monkey edge frag grip version.
@Sln_man25 күн бұрын
You should take a look at the Sanrenmu Partner pt711 model and compare the price.
@nerv5th25 күн бұрын
Yes it is a nice knife with a similar design for 15 eur really good value. Have a great day.
@jensebu786 күн бұрын
it's kind of the same knife. SRM makes the Atlas for Böker!
@nerv5th6 күн бұрын
@@jensebu78 I did not know hat but it makes sense. Thanks for sharing.
@jensebu786 күн бұрын
@@nerv5th I watched a lot of German videos. It's always said in these. Your welcome 🤗
@TopDog876227 күн бұрын
SRM is overlooked far too often. The Rubik has become a kind of classic for them. This model is a bit over priced for what it is.
@nerv5th24 күн бұрын
Yes they are overlooked because their main business is OEM manufacturer and have a couple of knives and tolls on the side. Thanks for watching.
@Foodiedad1727 күн бұрын
Uh oh. Mr. Brown micarta! 😂😉
@rozinemuriel141327 күн бұрын
How do i connect them to my phone?
@nerv5th27 күн бұрын
They have to be charged and when you open the case and go to your device's Bluetooth setting you should see them if not they are turned off or you have a bad pair and you have to open a varanty request with the seller.
@sonnyd82029 күн бұрын
Great review...I am seriously thinking about getting one also you have a great collection.
@nerv5th29 күн бұрын
Thanks unfortunately this one is only borrowed from my friend. Wish you a nice day.
@wind-catcher445429 күн бұрын
Whats the drill with the gloves? Every reviewer tends to wear disposable gloves. Thats weard as fuck since you're not a doctor :D
@nerv5th29 күн бұрын
How do you know I'm not a doctor? Anyway, I like to keep my knives clean plus it looks much more professional than my bare hands. Thanks for watching.
@wind-catcher445428 күн бұрын
@@nerv5th Sorry, mate ! maybe I was a bit rude. My fault. I appologize. Probably I'm an old dinozaurus and used to see bare hands of the reviewers. Its Ok. BTW thanks for the review of the fake CQC7. I'm almaust got frauded with that one. Turned out ok. And as for the waved Endura - its funny but waved Cara Cara 2 is better since its FFG. One thing to mention is that added wave feature is the coollest thing on.....axis lock (crossbar, clutch lock whatever). I dig my waved Griptillian.
@nerv5th28 күн бұрын
@@wind-catcher4454 No problem I understand. I'm happy that you did not get scammed. That is why I make those PSA videos. Thanks for watching and have a nice day.
@TimsSchoolOfFishАй бұрын
Nice one, brother 👊🏻
@nerv5th28 күн бұрын
Thanks for watching.
@josef6184Ай бұрын
The fake ones: - Less sharp letters on the pivot. - Smaller holes between the 2 words "DEMKO" and "KNIVES" on the pivot. - Larger facet on each side of the slot hole in the blade. - The texture on the titanium scales looks too sharp. - The clip looks too shiny. - The "D" of the word "Demko" on the blade looks more like a capital "I" than a capital "D". What else?
@nerv5thАй бұрын
Thanks for sharing.
@johnkeo358Ай бұрын
If you like the way Emerson opens, check out the snaggletoothmf mod you can do to other knives like the coldsteel and Benchmade knives
@nerv5thАй бұрын
Thanks for sharing. Have a great day.
@jamberrycloudАй бұрын
I went with the spacer method (folded some tape over itself and made small holes for the screws to pass through). Just 0.2mm to 0.5mm thickness should be enough, depending on tightness preference.
@nerv5thАй бұрын
Yes I agree that is the cheapest way how to resolve this issue and you don't need to have other knives with matching pocket clip configuration. Thanks for sharing.
@jamberrycloudАй бұрын
The clip on mine is also no joke. I added a small strip of folded tape under the flat part with the screws to act as a spacer. That extra 0.2mm thickness makes the clip useable now, but 0.3-0.5mm is likely better. Would've gone clip-less if the screws weren't so long and could be screwed back in to fill the holes though!
@nerv5thАй бұрын
Yes Exactly I made a video update on how I have solved this problem. Thanks for sharing. Have a great day.
@jamberrycloudАй бұрын
Oh nice! Didn't realise there was an update video!
@st33pd87Ай бұрын
In your comparisons you showed a Boker Plus, Knifecenter exclusive (looked like Micarta scales/handles - what model is that, please. Thanks for the vid. 👍
@nerv5thАй бұрын
Hi at 9:41 Boker Plus Jesper Voxnaes Little Friend Burlap Micarta KnifeCenter Exclusive kzbin.info/www/bejne/d4vMq5-Nl5ilm9k
@kaifrolic5668Ай бұрын
I appreciate you listing all of the important data in the description. Keep it up! I would probably get this knife because I like the tanto visual but sadly this wont be legal to carry in Germany so I'll probably pass.
@nerv5thАй бұрын
Yes Unfortunately this one is not 42a complaint design you could still have it at home. Thanks for watching and have a great day.
@SanguivoreАй бұрын
Just discovered these and they are fantastic! Great and detailed video, bud.
@nerv5thАй бұрын
Thanks for watching. Have a great day.
@SanguivoreАй бұрын
@@nerv5th You as well, my friend! God bless.
@bmoviebmovieАй бұрын
Did not know that Nashorn also designed the "Viking". Love his "Beluga". No missing his rhino maker's mark.
@CNYKnifeNutАй бұрын
It looks like they're gonna be using the same trash clip on the upcoming Terzuola Tac-Master, except with hidden hardware.
@khakicampbell6640Ай бұрын
Satisfying comparison section. 👍 Interesting to see all the subtle variations of tan micartas.
@nerv5thАй бұрын
Thanks for watching.
@airtow6766Ай бұрын
Thats a great blade grind. PF knives are one of my favorites for the money. Thanks
@LovesM855A1Ай бұрын
“You def have to put your finger deep inside”😂😂😂 thats what she said!
@seniorfrog6622Ай бұрын
The XL is a beast! Love mine.
@nerv5thАй бұрын
yes it is thanks for watching
@TopDog8762Ай бұрын
I like PF. I am a collector, a large part of my collection are budget knives. I still have eleven PF in my collection. They are a good solid built knife. PF was hot at one time, an up and comer. My top two PF's are the Beluga and the Skalor. So take my next comments with a grain of salt. PF has not been able to keep up with their competitors, the likes of Kizer and Kubey. They could stay with their main stay materials of D2/K110 and the occasional 14C28N. But their designs have become boring. I can't remember the last time I bought a PF, its been well over a year ago and I buy an average of 5 knives a month.
@nerv5thАй бұрын
Yes I understand and unfortunately you are right this is a problem with a lot of companies they just release so many new models that they become boring because at some point they just repeat the same with small changes. What I like about PF is that they know what they are doing and their knives are priced accordingly. Thanks for sharing and have a nice day.
@DarkWaterActualАй бұрын
Well said @TopDog8762
@DsPsLsАй бұрын
Love it❤thanks for great review👍
@mistersmith3986Ай бұрын
I have this same knife. Then I tried to swap the scales with my other Rat 1 D2 because it has a satin blade which I like better. I wouldn't work. So then I tried a blade swap and that wouldn't work right either. It wasn't till 30 minutes later that I noticed a few differences between this model made in China and my other Rat 1 made in Taiwan. Thanx for the video my Bladed Brother 👍 ⚔️ ✝️ 🇺🇲
@nerv5thАй бұрын
Sorry that you had problems with the swap and thank you for sharing your experience I hope it will help other people. I hope you have a great day.
@WhalesWillyАй бұрын
They were good for what they were 10-15 years ago but they have yet to innovate and adapt
@nerv5thАй бұрын
Yes and the is hope with new models with magnacut blades.
@Panzerfaust9161Ай бұрын
Ok at time stamp 10:10 what was the name of that knife? You sounded like you had a mouth full of oatmeal when you mentioned the name. Thanks.
@nerv5thАй бұрын
At 10:10 the knife you see is a Chinese OEM design sold under a couple of names like Kesiwo GT956 or Freetiger FT956 or Tunafire 956 You can see the unboxing here kzbin.info/www/bejne/ZpPLkmergKmWj9U
@anonymous4201Ай бұрын
I understand it’s a budget knife but is it actually any good?
@nerv5thАй бұрын
It depends on what you want to use it for. For example, a garden knife to dig in the dirt is excellent as well as a backup garage or tool knife. I would not use it in any situation where my life would depend on It.
@norryvampАй бұрын
Tento je velmi cute.
@nerv5thАй бұрын
@@norryvamp co je na tom prosim ta cute?
@norryvampАй бұрын
@@nerv5th je taky malicky zlatucky :*
@bmoviebmovieАй бұрын
Sadly, the more expensive a knife is, the less likely I would EDC or use it and more sadly, I could not afford to buy two of every knife I wanted. Thank you for showing.
@CNYKnifeNutАй бұрын
Decent design, shame they went and took a huge boker on it.
@RoninDoshoАй бұрын
I picked one up during the international knife day sale at Boker. I like this knife, but I don't know if I would have paid $141. The sale price of $99 seemed fair enough. I'm glad you showed the clip being tight. They always fall short with their clips beginning with the Kwaiken. You would think they would make a better one, especially since this is a "plus" model. I plan on having different scales and a custom clip made by another KZbinr who has one. All in all, like you said it is a robust knife. Probably not that great for small hands.
@nerv5thАй бұрын
If you have any chinese brand knife with a similar hole pattern on the pocket clip try to swap it I had luck with my.
@willchen7073Ай бұрын
I just got this earbuds today ❤ trying them out all night and what the F ! They are damn awesome for the price I paid ! I love them , they have the sounds and quality of my $189 JBL pro I had , love it love it