boa noite qual a importencia do adesivo? ele tem alguma finalidade ?
@thinkriderofficial3465Ай бұрын
Without it, there is no speed
@mikelim2576Ай бұрын
Does this can incur fatigue on carbon frame compared to x7 4 pro?
@thinkriderofficial3465Ай бұрын
Will not
@mikelim2576Ай бұрын
Considering sprints? I am comparing to my current x7-4 pro which has 5deg side swing
@MrGatossauro2 ай бұрын
😍😍😍😍😍
@ecbyzrgy2 ай бұрын
Hi, my thinkrider X7 stop working suddenly, my speed sensor was going to about 5km/hr and suddenly it went back to 0km/hr. thereafter it cannot detect any speed already. Tried to restart the whole thing and the same situation happen. Can you help to advise what I can do to make it working again, thank you
@@thinkriderofficial3465 should I be better the 3 prone or 4 prone then?
@Seasonhoooo5 ай бұрын
期待赶紧
@chailiang12305 ай бұрын
If I remove the magnet, is there any way I can recalibrate the power reading?
@thinkriderofficial34655 ай бұрын
Can do nothing about it
@chailiang12305 ай бұрын
If I remove the magnet, is there any way I can recalibrate the power reading?
@thinkriderofficial34655 ай бұрын
Can do nothing about it
5 ай бұрын
Hi, is this bike trainer compatible with Mywoosh?
@thinkriderofficial34655 ай бұрын
compatible
@chailiang12305 ай бұрын
Hi! What happen if I remove the magnet and not putting it back? Will it affect the power reading?
@thinkriderofficial34655 ай бұрын
Will seriously affect
@chailiang12305 ай бұрын
Hi! What happen if I remove the magnet and not putting it back? Will it affect the power reading?
@thinkriderofficial34655 ай бұрын
Will seriously affect
@chailiang12305 ай бұрын
@@thinkriderofficial3465 so the power reading will be much higher than the one with magnet? Is there any way I can recalibrate the power reading without magnet?
@leonardoriefel7685 ай бұрын
hello im from Uruguay , help me please , i want to reset my BC108 its full storage and I can't delete it from the application, I have used the PC, powerfun and thinkrider tools, I also don't see the option to delete with the trash icon within the application, maybe you can guide me
@thinkriderofficial34655 ай бұрын
You can connect to your computer, find the file with the "fit" suffix or format, and then delete it
@paulocorrea98686 ай бұрын
How many spacers do I need to use in a 8 speed cassette? Only 1 or 3?
@thinkriderofficial34656 ай бұрын
Usually one is enough
@fariswaerama33326 ай бұрын
Hey , how much spacer I needed and how thick are the spacer should be if my bike is 9speed 11-28T?
@thinkriderofficial34656 ай бұрын
A gasket。We included this in our kit
@leongweaihong95366 ай бұрын
How to delete the fit documents inside the bike computer?
@thinkriderofficial34656 ай бұрын
Delete it on your computer
@ellow-snowАй бұрын
Привет. Где скачать приложение на android?
@aflipz7 ай бұрын
When do the magnets need to be replaced?
@thinkriderofficial34657 ай бұрын
Replace it when it breaks
@BrunoSilva-vp1cr7 ай бұрын
@thinkriderofficial3465, qual valor de venda?
@thinkriderofficial34657 ай бұрын
It is not yet available in Brazil
@BrunoSilva-vp1cr7 ай бұрын
Qual valor aproximado para venda no brasil?
@AuxLine-bb8ps7 ай бұрын
Please help me adjust the correct tension of my thinkride A1 🙏
Hi, is it possible to bent the freehub? I might have bent them during taking out the cassette. Im not sure if its the freehub or the cassette that is bent. Thanks
@thinkriderofficial34658 ай бұрын
Hi. I can't be sure until I see the real thing
@kangdobby8 ай бұрын
When will you sell it?
@thinkriderofficial34658 ай бұрын
Korea cannot buy it for the time being.The exact time is uncertain.
@thinkriderofficial34657 ай бұрын
Will consider
@happyriding22837 ай бұрын
I hope it will be officially imported to Korea as soon as possible!
@MrKockabilly8 ай бұрын
I bought X7 Pro. But I noticed that the flywheel gets very very tough after about 11 or 12 rotation. Then it gets light, then gets tough again after 11 to 12 rotation. It keeps repeating.
@thinkriderofficial34658 ай бұрын
Hello, regarding this question, this is the email address of our engineer, you can contact him. email:[email protected]
I have same problem....the Cadence sensor show 0 rpm always ...The Power sensor is ok....any troubleshooting ??? Thx
@sovannreach9511 күн бұрын
@@vandersonnogueira9029 the same problem here
@iamjclim9 ай бұрын
Do i need to adjust derailluer?
@thinkriderofficial34659 ай бұрын
As you disassemble and install the bike, you will need to adjust your speed change
@albertau165811 күн бұрын
Can I use 12 speed cassette?
@BrunoSilva-vp1cr10 ай бұрын
Já está disponível para venda?
@spncycleph919710 ай бұрын
❤❤❤
@peucaue10 ай бұрын
I need to replace the bearings because they are making too much noisse, can you tell me how to do it?
@thinkriderofficial346510 ай бұрын
Contact our engineer and he will tell you how to get the parts and install them. email:[email protected]
@DerRofflers10 ай бұрын
How to stop the flywheel from spinning when removing the nut? It's also not shown in the video, probably for the same reason.
@thinkriderofficial346510 ай бұрын
With electric, powerful torque you can remove the nut even if it spins
@maty609310 ай бұрын
can I connect it with Strava?
@thinkriderofficial346510 ай бұрын
Sure, but you need to manually sync strava by logging in to the website。WEBSITE:www.powerfun.com。Log in and sync your data
@davemtbpowell396510 ай бұрын
Can sombody give me a link for a microspline 12 speed hub for my x5 neo please? Thanks I'm in the UK
@thinkriderofficial346510 ай бұрын
You can try to contact our official store to see if there is any way。 www.aliexpress.com/store/5793617?spm=a2g0o.detail.1000007.1.b8216e95Z7eGrH
@ricardomorgan1418 Жыл бұрын
Hello. Is there a way to see the different versions of this trainer? Or how can I know if I´m buying version 1, 2, 3 or 4? Thank you
@thinkriderofficial3465 Жыл бұрын
We need to see the appearance of the machine to tell. You can ask the dealer
@abrahamramos2573 Жыл бұрын
Se lleno la memoria qué puedo hacer?
@thinkriderofficial3465 Жыл бұрын
You can export the data and delete the data in BC108
@BraydenRhee Жыл бұрын
I haven't used it for a long time, but now I'm trying to use it again, but the blue light doesn't come on. I think the battery is dead. What should I do in this case?
@thinkriderofficial3465 Жыл бұрын
Buy the same battery directly
@SuperAlmighty121 Жыл бұрын
where can I buy new stickers and 3mm gasket?
@thinkriderofficial3465 Жыл бұрын
Contact customer service at the store www.aliexpress.com/store/5793617?spm=a2g0o.detail.1000007.1.b8216e95Z7eGrH
@elvyskennethmiguel8817 Жыл бұрын
My problem with my x7 pro is the resistance it only gives 100watts.
@thinkriderofficial3465 Жыл бұрын
Can you shoot a video and send it to our engineer's mailbox. email:[email protected]
@maurosebafloresrovera8532 Жыл бұрын
Hello, my x7pro stopped working, the lights don't blink, I need a new mainboard. How do I buy it?
hi have a question,about the noise when you plug in the power supply is it going away,because just bought trainer and the noise is still when am riding thanks
@thinkriderofficial3465 Жыл бұрын
Is it loud? Some sounds are normal
@thierryyanick1908 Жыл бұрын
@@thinkriderofficial3465 No its not loud,i don’t hear the sound when am riding,i think is normal maybe
@thinkriderofficial3465 Жыл бұрын
Ok, thank you. Thank you for your feedback. If you have any questions, please contact us
@thierryyanick1908 Жыл бұрын
@@thinkriderofficial3465 Yes,and what about on zwift,the watts stay low,is not normal,if you can help please thanks
@thinkriderofficial3465 Жыл бұрын
What is the specific situation? Can you shoot a video and send it to our engineer's mailbox,email:[email protected]
@Cap_Clark Жыл бұрын
The trainer is squeaking, any tips?
@thinkriderofficial3465 Жыл бұрын
Could you please shoot a video and send it to our engineer's email?email:[email protected]