Sonoran Tech

Пікірлер

@BACKSPIN9ball Күн бұрын

Thank you so much, I have watched countless videos hoping to find a tutorial for how to set this up isolated to only vms running in proxmox cos I was scared to break my home network and this is exactly what I was looking for. Now I can practice OPN sense on my proxmox vms and once confident enough I can deploy this to my physical home network. Thanks again

@SonoranTech-hf5hf 20 сағат бұрын

Glad it helped! I didn't want to mess up my network either. :)

@bluesquadron593 3 күн бұрын

appreciate the overview

@marinuspretorius8230 4 күн бұрын

Hope you can help me here. I have setup everything exactly as in the video. Couple of things. First my wan interface in opnsense does not get an ip in the cidr block specified in proxmox (192.168.10.*) It still gets ip from my main system. (192.168.1.40). Then the second thing is that the VM that I setup within the same network as opnsense does not get internet access. I have reloaded the opnsense services as suggested but my opnsense still cannot ping my ubuntu desktop vm. The ubuntu vm can ping opnsense gateway. Here is just some info on my setup. internet --> netgear orbi outer --> netgear switch ---> 2 cables from switch into my proxmox server (1 in management ethernet and 1 into the WAN port for opnsense) I have been struggling a lot with this. Please help

@SonoranTech-hf5hf 3 күн бұрын

On the IP address, proxmox isn't going to give it an IP unless you are running a dhcp server, so it is likely getting the ip from the main dhcp server for your network. To make it easier, you can manually set the IP addresses to avoid any complications with dhcp.

@Sbruce8887 2 күн бұрын

@@SonoranTech-hf5hf Great vid but this had me stuck for a while as well until I realised you had 2x physical NIC's, one for the WAN and one for the Management.

@johngreyvenstein5987 7 күн бұрын

Hahaha classic “having a computer” exactly right hehe

@jgarfield 12 күн бұрын

Better off just using gravity sync and setting both as resolvers.

@SonoranTech-hf5hf 12 күн бұрын

I tested this and it didn't work the way I wanted. Originally I set up two pi hole instances and configured dhcp to return both. When one instance was turned off, the clients didn't fail over quickly, causing a dns failure across all clients in the house. There is probably some caching/etc on the client driving this.. but anyway, using keepalived made the failover immediate and invisible to clients.

@patrickk.6154 17 күн бұрын

First: Great Video! I have installed it on my Proxmox in the same way. Really great! Have you been able to solve the problem why the opnsense settings always have to be reloaded after rebooting the VM?

@SonoranTech-hf5hf 17 күн бұрын

No unfortunately I haven't figured that out yet. I started playing around with putting an opnsense VM as the first device in my network (just behind the cable modem), but got distracted and didn't finish it... was hoping that would solve the problem. Maybe I'll get back to it one of these days.

@ErikS- 22 күн бұрын

A video on how to configure opnsense internal to a proxmox environment, was something difficult to find. Luckily, you made one 1 month ago😀 Thanks! Maybe a question though... In the video, you referred to one bridge as being a "management interface". Maybe you could explain such a config (in a new video)?

@draft13 22 күн бұрын

PERFECT; just set mine up.

@lon3wolf878 24 күн бұрын

Great explanation!😄

@SonoranTech-hf5hf 23 күн бұрын

Thanks! 😃

@_pixelpicnic Ай бұрын

Good video - Thanks for a few ideas. Shoutout to dave!

@SonoranTech-hf5hf Ай бұрын

Any time!

@SB-qm5wg Ай бұрын

Is anyone shocked? When I saw MS decompressing p/w protected zip files on their cloud, I figured things like this were coming.

@SonoranTech-hf5hf Ай бұрын

Not surprised at all. I should have talked about this in the video, but it got me thinking about the apps we use in a home environment. So let's say I decide to use Word on files stored locally at home.. how do I know Word isn't doing the same thing? There's a good argument for open source here and even building directly from source.

@SB-qm5wg Ай бұрын

Great video. Exactly what I was looking for. Thank you.

@hawolex2341 Ай бұрын

Concerning. This is the reason I have a TrueNas here at home. And a dedicated server on Rent a server on Hetzner. Have all my docs sinked 4 times a day with Rsync. also have Nextcloud there så sync my phone pics, who syncs back to my server with a sync every 15min. Tailscale and look the ports.

@user-gr4vx8xz1l Ай бұрын

liked your video and subscribed

@SonoranTech-hf5hf Ай бұрын

Thanks!

@Sico10001 Ай бұрын

Thanks so much for this. Was really useful. Would be interesting to compare to Azure Archive.

@SonoranTech-hf5hf Ай бұрын

Yeah it’s been quite a while since I looked into the azure storage options.

@iLeanonsyrup Ай бұрын

do you work in IT?

@SonoranTech-hf5hf Ай бұрын

Background is in software engineering.. so more writing code than system administration

@kristof9497 Ай бұрын

Thanks.

@MarkConstable Ай бұрын

Oh BTW, any Proxmox SDN with EVPN + VXLAN examples would be really cool ;-)

@MarkConstable Ай бұрын

Excellent clear instructions. Not a complaint but it's odd that even in 4K the output of the various shells is quite blurry. I appreciate the lack of upsell and annoying talking head shots... 100% focus on the task at hand.

@SonoranTech-hf5hf Ай бұрын

Oh no I put the annoying headshots in later videos.. point taken :) Thanks for the comment on the blurriness, it is probably because by screen isn’t 4k.

@MarkConstable Ай бұрын

@@SonoranTech-hf5hf Heh, yes, I just watched your VLAN video and there you are... double sized extra sauce head shot ;-)

@freddie2153 Ай бұрын

Great video thank you for making. was very helpful!

@SonoranTech-hf5hf Ай бұрын

Glad it was helpful!

@ChrisDePasqualeNJ 2 ай бұрын

Nice and simple. IN the past I had OPN with 3 nic's running in Proxmox on an HP Elitedesk. Onboard nic was for management for Prox and then I had two USB 1g Nics - one for WAN connected to my secound ISP and one for OPN LAN. I had LAN going to a Firewall running OpenWRT with 3 different wireless networks. Iot, CAM and Stream. And crated three dif vLAN's in OPNsence to hand out DHCP 172.16.6.x 172.16.7.x and 172.16.8.x. All was well. But then I upgraded to Prox 8.1 and tried to use the SDWAN on Prox. I wanted to be able to be able to add dif OPN vLAN's to different VM's Its been a mess and I broke every thing. :-( I'm hoping you may be inspired to make a video on my config. The use case is to keep my IoT stuff segregated from my Cameras with Firewalls and Zenarmor plug-in. Thank you Sir.

@SonoranTech-hf5hf 2 ай бұрын

Yet another project to try :)

@mercylinuxgmailcom 2 ай бұрын

What is this appliance model , is a firewall ? Which model ? (11:25)

@SonoranTech-hf5hf 2 ай бұрын

The top one is a Dream Machine SE and the bottom is a Standard 24 POE switch. store.ui.com/us/en/pro/collections/unifi-dream-machine/products/udm-se?variant=UDM-SE store.ui.com/us/en/pro/collections/unifi-switching-standard-power-over-ethernet/products/usw-24-poe?variant=USW-24-POE

@GrishTech 2 ай бұрын

At 28:30 - There is a setting under Datacenter > Options > HA Settings. Set the policy to Migrate. The default is shutdown. This way when you shutdown a host, it will live migrate things first that are in HA groups, rather than shutting them down.

@SonoranTech-hf5hf 2 ай бұрын

Thank you!

@MrSpamcho 2 ай бұрын

Is it possible to set the date to be DD-MM-YYYY?

@SonoranTech-hf5hf 2 ай бұрын

Sure.. did you want to sport that format on both the matching side and output side?

@MrSpamcho 2 ай бұрын

@@SonoranTech-hf5hf Yes, if possible this would be great!

@SonoranTech-hf5hf 2 ай бұрын

Not a problem

@SonoranTech-hf5hf 2 ай бұрын

Release candidate on github if you want to try it: github.com/g770/MediaOrganizer/releases

@MrSpamcho 2 ай бұрын

@@SonoranTech-hf5hf Thank you very much!

@bluesquadron593 2 ай бұрын

Wow just found this channel! Perfect content for me and I also like to delivery. Good luck with your youtube stuff!

@SonoranTech-hf5hf 2 ай бұрын

Awesome! Thank you!

@anthonyyoung7949 2 ай бұрын

best tutorial yet and damn is portainer the best. I am trying to create a React web app that when you click on a certain page route, it opens this so we can connect to our VNC support tools machine in AWS.

@SonoranTech-hf5hf 2 ай бұрын

Glad it helped.. it definitely wasn’t easy to get everything working but hopefully saved people some time.

@anand-nb4bb 2 ай бұрын

Hi Bro I have a router provided by my ISP its a fibre based, it has 4 ports one is for fibre-optic cable which comes from ISP. Other 2 are LAN ports one is connected to my PC via LAN cable & a telephone port nothing connected to it . Can I configure pfsense on my PC. Also what do I need to do physically on it like which port is required etc..? Can Pf sense be installed on a VM & then used on a physical machine as a firewall?

@SonoranTech-hf5hf 2 ай бұрын

I think the answer is yes, but I haven't tried it. You can run pfsense (or opnsense) in a vm on your PC and have it be a firewall to your entire home network. I believe you'll need 2 more network adapters for this (or one card with 2 adapters). You'll need to be able to pass the nics through to the VM running pfsense. I'm actually working on a video about this right now.. just picked up some extra network adapters for my proxmox server but haven't given it a shot yet.

@mercylinuxgmailcom 2 ай бұрын

What is this firewall appliance ?

@JonatanCastro 2 ай бұрын

Really cool to see! Are you able to live migrate LXCs using CEPH?

@SonoranTech-hf5hf 2 ай бұрын

I think you can but I haven't tried it. I'll need to check that out.

@GrishTech 2 ай бұрын

Live migration with LXC is not a thing in proxmox (or LXC in general). It's not a VM. The container is stopped, then started on the other node. There is a restart process for the container involved.

@metalmasterlp 2 ай бұрын

awesome videos, keep it up!

@SonoranTech-hf5hf 2 ай бұрын

Thanks, will do!

@zippi777 2 ай бұрын

Good job man but.....To maximize the space occupied on my Synology NAS, I installed ProxMox Backup Server as a VM on the NAS and make backups there. This way I make the most of deduplication and save a lot of space on the HDDs NAS!

@SonoranTech-hf5hf 2 ай бұрын

I definitely need to check out the proxmox backup server.. future weekend project ahead.

@zippi777 2 ай бұрын

Thanks for this video! Signed up!

@Darkk6969 2 ай бұрын

If you don't want to use CEPH you can use ZFS with replication which will give you HA. The data replication won't be in real time but you can configure that per VM or CT. Smallest is 5 minutes for replication. Some of my VMs are mostly static or little data changes I set them to replicate every couple of hours and it's usually pretty quick. I've used CEPH in production at work and later switched to ZFS with replication to keep things simple for me as don't have time to troubleshoot issues. As a CEPH cluster if something should go wrong it could effect the entire cluster. Where as with ZFS it only affects the node. Newer version of CEPH has come a long way since I last used it but I prefer ZFS.

@SonoranTech-hf5hf 2 ай бұрын

I will check that out. I would love to have a proxmox cluster double as a simple nas so I could pool all of my storage across multiple machines. I think ceph could do that but it isn’t worth then hassle.

@ChandrashekarCN 2 ай бұрын

💖💖💖💖

@markstanchin1692 2 ай бұрын

Hello I have the same issue in setting up as you did where the VM migrated to a host without its disk vol now I’m stuck. How do I migrate or configure the vm back to its orig host with its data. Thanks for the video.

@SonoranTech-hf5hf 2 ай бұрын

I’ll need to check on that. I couldn’t find a way to do it using the web ui.. might have to use the command line.

@cberthe067 2 ай бұрын

I think you create replicated pool so you are loosing a lot of storage space ... why do not create erasure coding pool ?

@SonoranTech-hf5hf 2 ай бұрын

Honestly was just being lazy. Since I was building it to learn and it was using layers of hypervisors I didn't put any effort into configurating the pool well.

@GrishTech 2 ай бұрын

replication is computationally more efficent. In a prod environment, you want seperate nodes just doing ceph, with your vm nodes handing the compute.