ronenfe

Пікірлер

@smithies_jocks Ай бұрын

Sounds like your butthole has high pressure.

@GMC1CHRYSLER1CITROEN2ALFA1. 3 ай бұрын

כל כך אהבתי את התוכנית בזמנו. וגם היום מנקודת מבט אחרת !

@ronenfe 3 ай бұрын

I bought another one just to confirm. It tastes the same. Stay away.

@carlosmsx 5 ай бұрын

do you know the protocol use your ecu? is iso 9141-2 ?

@ronenfe 5 ай бұрын

Sorry, I don't know about protocols, it's obd1 so each manufacturer has its own , I don't think it has a standard?

@carlosmsx 5 ай бұрын

@@ronenfe What brand/model of can clip do you use?

@ronenfe 5 ай бұрын

@@carlosmsx you can read my story here: www.twingotuningforum.de/thread-41455.html

@ronenfe 5 ай бұрын

www.aliexpress.com/item/4000125462567.html?spm=a2g0n.order_detail.order_detail_item.3.5a66f19cRRJCbO

@carlosmsx 5 ай бұрын

@@ronenfevery very thanks!

@yingyangorca4124 5 ай бұрын

Put some boots on champ.

@ronenfe 6 ай бұрын

play.google.com/store/apps/developer?id=Festinger+Software

@JH-tc3yu 7 ай бұрын

Is the app active whenever it's open? Or can it run in the background? I don't see an on/off button

@ronenfe 7 ай бұрын

Hi. You simply press back to exit the app or close it by pressing the rectangle and drag the app app from recent apps list. If you don't see the app notification, it means it's closed. Let me know if I was clear. I think I explain it in the video.

@ronenfe 7 ай бұрын

7:20

@TechImaginist 8 ай бұрын

It was very hard to pull out (Pun intended). But you can actually break off the rubber and yank it with a nose plier or push it in, which causes it to fall down to the bottom, which is open, and thus can be removed.

@ronenfe 8 ай бұрын

Open the choke

@ronenfe 8 ай бұрын

Yes. Like I said it was the throttle stop screw adjustment and the choke.

@mattjacomos2795 8 ай бұрын

G'day, I'm having a similar issue starting my XF, Did you ever work out the issue?

@ap0kalyps3 8 ай бұрын

bro I have the same problem... every video of removing transit bolts I look at, they just pull the fuckers out like nothing and with sharp, I tried straight pulling (like it suggested in the manual) I tried rotating while pulling, I got blue fingers from all the pressure of those white caps digging into them I can't fucking get them out...

@ronenfe 10 ай бұрын

Now when I think about it, maybe you should not remove the metal bolts completely, just loosen them and pull them? And then it will get out?

@ianmcintosh6457 10 ай бұрын

Bought a Sharp washing machine before watching this guy. 😅 Managed to prize the awkward things out although two dropped out the bottom of machine. Video helped .You tube to the rescue again. Thanks for posting. 🎉

@ronenfe 8 ай бұрын

Do you mean they got broken inside?

@MickFitz-nd4te 10 ай бұрын

Speaker connection has 2 pins from pcb The pin nearest to the centre of cluster Is it plus or minus Regards Michael

@ronenfe 10 ай бұрын

From what Im saying in the video looks like the outer pin is the positive and the inner one is negative. You can check with multimeter the voltage.

@ronenfe Жыл бұрын

This indeed fixed the issue. Probably the connection wasnt firm here at the beginning of my trst in the video.

@xioopgu Жыл бұрын

Your weak sir

@jedrzejgadua-zawratynski6573 Жыл бұрын

The worst product and company. Impossible to remove. Glad to see I am not going mad.

@חנהסופר Жыл бұрын

26:42 ועד הסוף => 😂😂😂😂😂

@ronenfe Жыл бұрын

מה זה

@חנהסופר Жыл бұрын

@@ronenfeהקטע עם הכלב בתוך התיק, קורע אותי מצחוק כל פעם מחדש😂😂😂

@ronenfe Жыл бұрын

@@חנהסופר איפה ראית את זה בעבר?

@חנהסופר Жыл бұрын

@@ronenfe לא ראיתי, ראיתי עכשיו וצחקתי😄

@ronenfe Жыл бұрын

@@חנהסופר חיפשת הקלטות של על גלגלים?

@josecaro816 Жыл бұрын

under the bike, on the left side where the shock pump is, there is a hole, there you put a screwdriver and turn it clockwise, once it is fully tightened you will turn it 13 clicks to the left side, that would be the measure indicated by the manual. if you see that it is still too soft you can tighten it. if you see that it is still too soft you can tighten it. otherwise you should recharge the pump with nitrogen.... greetings from colombia

@ronenfe Жыл бұрын

I tried both setting without seeing any difference. I put air with 150 psi. But the shock is now leaking. I have to rebuild it. But it was the same on a different shock and even after rebuilding. Are you saying yours is different than what you see here?

@josecaro816 Жыл бұрын

@@ronenfe in my case it was the same, it was too damped and it was due to lack of maintenance, I took it to a workshop and there they repaired it and put nitrogen, that way it was good again ..... do you have the manual of the bike?

@ronenfe Жыл бұрын

@@josecaro816 yes I have the manual. Can you maybe post a video showing how hard is your suspension when you move the bike on the sidestand with the hand like I did?

@leerespass4716 Жыл бұрын

How u know it was bad??

@ronenfe 11 ай бұрын

If I remember correctly the wire got torn from the connector.

@Helloitskovo Жыл бұрын

Hi mate, which year is that bike?

@ronenfe Жыл бұрын

This was 2001, I only had it for about one year.

@Helloitskovo Жыл бұрын

@@ronenfeokay thanks, I have the same from 2001 as well but I cannot find the plug to attach to my gear indicator :p Edit: Ah so it is in the fuse box.. 😅

@ronenfe Жыл бұрын

@@Helloitskovo are you talking about supplying a 12v to power it up?

@Helloitskovo Жыл бұрын

@@ronenfe no I can't seem to find the red plug to plug my gear indicator in. So the fuse box is for powering the indicator is what I understand and then there is still the gear indicator plug somewhere.

@ronenfe Жыл бұрын

@@Helloitskovo there is no plug for a gear indicator. This device uses 2 magnets that you mount next to the gear shift. You can connect another wire to the neutral sensor wire. The 12 volts goes to one of the fuses that has current only when the ignition is on.

@LastCommodore Жыл бұрын

easy to do on a small tire like that.

@AlanCorna Жыл бұрын

Hi ronenfe! Great video! You know, I bought a k2001n android stereo and I cant put the agama launcher like a principal launcher. How do you config in your unit? I try in the agama launcher settings but every time that the stereo start, run the original launcher.

@ronenfe Жыл бұрын

You just change it in the settings of the device. You go there through Agama settings.

@crimson2013 Жыл бұрын

Great you got this working ! , It won't run on windows 7 or 10 correctly , would it be possible for you to share the VM file ?

@ronenfe Жыл бұрын

I think it can run on any 32 bit os. I don't think I still have the system that runs it, I switched to using a clip, because it's kind of useless.

@ronenfe Жыл бұрын

If the program doesn't crash for you, it should be ok as long as the the USB to kkl adapter driver is installed correctly

@ronenfe Жыл бұрын

Now I see in the forum post I posted, that I had to use windows XP so maybe I'm confusing with the clip installation. Check the forum post link in the other comment here.

@bmwe6xcsm913 Жыл бұрын

How does it feel? Do you like it more with this ratio?

@ronenfe Жыл бұрын

It feels good, but I think next time I'm going back to original because I don't really need to go that fast. Also with the Kenda big block I had before I couldn't go fast anyway because of wobbling. With the Michelin anakee adventure I can , but again, I don't really need to anymore.

@ronenfe Жыл бұрын

It can also save fuel though

@omarkyem8229 Жыл бұрын

Best video about testing LS2 helmet so far

@oferholtzman7385 Жыл бұрын

אחלה הדבר על הטורבו

@bruzmoto 2 жыл бұрын

murag bayot mohapak

@ek5445 2 жыл бұрын

Ok, thanks!

@ek5445 2 жыл бұрын

Hi, thanks for video. Is this an XF650? I have a dr650 and noticed that I can not achieve good chain tension even after tightening. Two of the links seem too tight too easy flex. I cleaned and greased, but found it does not want to cooperate. Mostly its just a bit jerky and noisy and not as tight on acceleration. It seems like someone may have switched my chain without me knowing. I can't figure out why it does not want to stay tensioned. Neither sprocket are worn too bad. Any thoughts? I noticed the XF is more similar to the Dakar model. Do you like it? The US model is just the dr450 or dr650.

@ronenfe 2 жыл бұрын

Your chain is too worn. Replace chain and sprockets. Yes I like my xf650 very much. I have it for 5 years already.

@ronenfe 2 жыл бұрын

No point to clean and grease a sealed chain, it can even shorten its life if you damage the rubber rings

@chrissmyth60 2 жыл бұрын

Its the inner padding that goes out of date because it wears down over time

@ronenfe 2 жыл бұрын

I read it's also other parts like foam and plastic

@dariusmocan4157 2 жыл бұрын

hy to me works good but hawe a problem night i dont see nothing no lights you now wich one is the bulb for night lights ???

@ronenfe 2 жыл бұрын

There are 2 bulbs for the backlight

@johnnysprocketz 2 жыл бұрын

you got lucky, mine was absent to the party, wish it was stuck to the bottom as yours was.

@ronenfe 2 жыл бұрын

Are you absolutely sure? The replacement I got also has the link stuck at the bottom. If not, contact Amazon, they sent me a replacement without any issues.

@johnnysprocketz 2 жыл бұрын

@@ronenfe yes I am 100% sure, don’t assume everyone who opened a box without a master link in it overlooked it stuck to the bottom of the box, your one of the lucky ones.

@johntaylor3255 2 жыл бұрын

A terrible video. If you are going to post something, look at it first & spend some time doing it properly.

@Shri27. 2 жыл бұрын

Thanks for the video !! Looks like the JT chain's connecting links are all stuck at the bottom of the package

@scottyscotty77777 2 жыл бұрын

I lost the key for this same ignition. If I take it apart like you have done, is there a key code someplace on the tumbler cylinder? Thanks

@ronenfe 2 жыл бұрын

I didn't see anything, but when I tried to switch cylinders for the helmet lock, I moved the wafers from the old to the new, but the key wasn't working. So it may not help to switch the wafers from the old cylinder to the newer for the helmet lock. I think each wafer has a number.

@ronenfe 2 жыл бұрын

How will the code help anyway if you don't have the key. will need to cut a new key based on the wafers you put. Maybe it's possible, search online, it doesn't seem easy.

@ronenfe 5 ай бұрын

You can just file the wafers to work with the new key

@ridelife507 2 жыл бұрын

Thanks bro

@urthalenharr9408 2 жыл бұрын

Poor camera angles....moving all around made no sense

@ronenfe 2 жыл бұрын

It's not easy to do it by myself using my phone

@laynetravis 2 жыл бұрын

Hi ,my light in my lcd screen is burnt.. how can i change it? thanks

@ronenfe 2 жыл бұрын

There are 2 bulbs under it. You need to remove the dashboard.

@laynetravis 2 жыл бұрын

@@ronenfe thanks for advice

@guitartalks7130 2 жыл бұрын

Can i change the color of the screen? I want a White light not yellow. But i didn't see the the lightbulb

@ronenfe 2 жыл бұрын

There are two bulbs under it, it won't become white, it will become an uglier orange

@Dar7635 Жыл бұрын

@@ronenfe hello! What bulb type are those? The left one stopped working so I need one. Can I get a led one in a different color or it will look bad? Thanks!

@ronenfe Жыл бұрын

@@Dar7635 you can try, it looked bad when I put white led. The screen still makes it kind of Orange. It should be t4 bulbs.

@Dar7635 Жыл бұрын

@@ronenfe for some reason I think it was t5 but it was a long time ago that I took it apart! Thanks! I'll try red maybe!

@ronenfe Жыл бұрын

@@Dar7635the t5 has longer base, if I remember correctly when I tried a t5, the rubber cap didn't close properly.

@cagdastopraksk 2 жыл бұрын

Heyyy

@secretosdelamecanica6223 2 жыл бұрын

m.kzbin.info/www/bejne/e5Kzi6lrftGVsLM

@greg230076 2 жыл бұрын

can you help me with this program?

@ronenfe 2 жыл бұрын

Yes

@greg230076 2 жыл бұрын

@@ronenfe on what pc do you work this program?do you have a download link for it?

@ronenfe 2 жыл бұрын

@@greg230076 I used oracle virtual box and ran xp 32 bit

@greg230076 2 жыл бұрын

@@ronenfe do you know where can i find xr25pc?

@ronenfe 2 жыл бұрын

@@greg230076 turborenault.co.uk/resources/xr25pc-software.93/

@Lizyla79 3 жыл бұрын

Hahaha lol 😂 great info

@yeixonperez7908 3 жыл бұрын

Hi. did you manage to find the source of interna noise?

@ronenfe 3 жыл бұрын

I don't know, it disappeared by itself soon after, maybe something in the clutch was binding.

@ronenfe 3 жыл бұрын

it went an engine rebuild a month before, maybe it's related and it was part of the break in

@emptyfridge3962 3 жыл бұрын

Hi! I have an issue with my right mirror hitting my windshield when I turn the handlebar to the right. Left one is ok and the mirror mount seems to be at the default position on the handlebar. Any idea what could the problem be? Love the freewind btw. Awesome bike even though it leaks some oil in my case 😂

@ronenfe 3 жыл бұрын

Either change the brake lever angle or the handlebar angle.

@emptyfridge3962 3 жыл бұрын

@@ronenfe wow thanks for the quick answer! I tried changing the brake lever angle but it's already way up. I'm suspecting the handlebar is moved to the front because of a possible fall that the bike had from the previous owner. I'll try pushing it back a little I guess 😂

@ronenfe 3 жыл бұрын

@@emptyfridge3962 no problem, just remove the 4 plastic caps, release the Allen bolts and change the handlebar angle.

@emptyfridge3962 3 жыл бұрын

@@ronenfe Thanks again! You're great! Ride safe!

@janescott6276 3 жыл бұрын

Bloody demented got three out fourth won’t budge any advice please welcome before I lose my mind

@ronenfe 3 жыл бұрын

Just break it

@ronenfe 8 ай бұрын

Maybe use lube or just loosen the metal bolt half way and pull it.

@gustavoandrefeyh1691 3 жыл бұрын

great video, i talk about brazil, i would like to know what is the amount of oil that goes in this shock absorber

@ronenfe 3 жыл бұрын

I just had to do it again because it leaked again. It's very little. Maybe 100-200ml?

@gustavoandrefeyh1691 3 жыл бұрын

@@ronenfe if you put 150 ml maybe it works, I couldn't find anything about it on the internet

@ronenfe 3 жыл бұрын

@@gustavoandrefeyh1691 it's not how you do it. You need to fill it completely and bleed out the air. Search for dr350 shock video. It's similar.

@nohandle196 3 жыл бұрын

Do you happen to know if this is the same setup in a 2010 new beetle? Thanks!

@ronenfe 3 жыл бұрын

Sorry. I don't.

Ең жақсы KZbin

Пікірлер