Patrick May

Пікірлер

@alskarwow5247 Күн бұрын

Hey! Thank you for the vid ! Could you explain how did you manage to obtain an autocad like cursor please ? Thank you!

@mi_jan 14 күн бұрын

This is a great breakdown Pat! ❤

@EnderAydin 19 күн бұрын

Thanks for this informative share Patrick.

@jaax2 Ай бұрын

Zillions thanks!! You unknowingly juste saved my mental sanity!

@LostMarkTwain 3 ай бұрын

FYI In some situations, when nothing else works, I discovered that if you change the wall direction of a specific wall (there is a special command for that) then it works... Go figure! 🙃 Man... this piece of software is getting worse by the day.

@PatrickMay4dProof 19 күн бұрын

it definitely seems that some features have been hanging around unfinished for a long time. I've never tried the invert wall direction to fix plan connections; usually use that to get surfaces to align in 3d/elevation. I'll see if it fixes my plan connections next time I'm against a wall! thanks for the tip!

@WilliamButtmi 4 ай бұрын

Awesome Patrick, been looking for a good explanation of the relationship between story level and sea level for years! Thank you very much!

@wheres_bears1378 5 ай бұрын

Can a zone be used to indicate finishes in an section? For example tiles with a thickness of 50mm

@danielstephen9487 7 ай бұрын

please how did you open the story settings window?

@PatrickMay4dProof 7 ай бұрын

com+7 is my shortcut; it is also under design > story settings

@GOGO666 8 ай бұрын

dumb solution

@staceyandersen5226 9 ай бұрын

Is there audio to go with this?

@craigp.vaughn215 9 ай бұрын

Great explanation!

@DSven2000 10 ай бұрын

Exactly what I was looking for, and clearly explained. Thank you!

@RomanBuha 11 ай бұрын

Hi Patrick. Thanks for the video. However, it is still not working for me. Any other solutions?

@PatrickMay4dProof 10 ай бұрын

only other thing to do is to delete the marker and start over. If you copy/paste each viewpoint into a worksheet first you can keep a record of the annotation/drafting

@DVain 11 ай бұрын

any way to turn up volume in the youtube editor?

@whxis_aisha 11 ай бұрын

Hello! I hope you can help me. I followed your instructions, but my track is located vertically, not horizontally (on the surface of the road). I tried to find a way to turn it, but it didn’t work. Could you tell me why your road is located correctly - horizontally on the road surface?

@shirkhan9111 11 ай бұрын

Can you do a video on your profile environment and what setting did you adjust to get cursor like that

@ar87ace Жыл бұрын

Thanks 👍🏼

@ayan13yxq Жыл бұрын

There should be a better way to do it.🥲

@donovan7 Жыл бұрын

"promo sm"

@conmes3077 Жыл бұрын

👍🏻

@toddoeftger3962 Жыл бұрын

I hear nothing in this video. Does it have audio?

@PatrickMay4dProof Жыл бұрын

appologies... I didn't realize the sound didn't go out with processing... maybe I'll re-record it soon

@njabulokhabako5990 Жыл бұрын

Been looking for this for some time now. Thank you

@shirkhan9111 Жыл бұрын

Amazing thank you !!

@ayan13yxq Жыл бұрын

很珍贵的经验，感谢分享👍

@conmes3077 Жыл бұрын

👍🏻👍🏻👍🏻

@ghassankanaan1767 Жыл бұрын

👍👍👍

@jeregamm Жыл бұрын

Nice! I suspect that top part could simply be part of the railing too.

@PatrickMay4dProof Жыл бұрын

yeah, I probably could have built the entire wall/railing/etc. with railings sometimes simpler is better though

@alexnader81 Жыл бұрын

Good tip! I didnt know that Enter, then Enter again for spot/points elevations! Thanks!

@PatrickMay4dProof Жыл бұрын

so many new little things like this, I pick up almost weekly

@shirkhan9111 Жыл бұрын

Great video Patrick. I was wonder if you could please cover reference level for Mesh and how to set it up properly. I am have trying to figure out how to best use the reference level for site topography with the mesh tool. For instance my FFL is 101.10 (Australian Height Datum), how would I go about setting up the reference levels on a really slope site so that I can communicate levels for site excavations and retaining walls in elevations or sections for council and other consultants? Also for my own understanding.

@PatrickMay4dProof Жыл бұрын

thank you for the inquiry. This seems like a project or case specific need. I'd be happy to do a video on how I handle stories, project 0, reference levels, and sea level; and how the mesh and floor level/contours relate to that... it may be a few weeks until I can get that video out, but I'll see what I can do

@shirkhan9111 Жыл бұрын

@@PatrickMay4dProof yes Please !! Your approach and techniques are very helpful and always up skilling me. Will be on the look out. Thank you

@conmes3077 Жыл бұрын

cool 👍🏻

@krissosful Жыл бұрын

Nice!

@krissosful Жыл бұрын

Nice ArchiCad tutorial!! Keep going, thanks for sharing👏👏

@PatrickMay4dProof Жыл бұрын

Thank you

@krissosful Жыл бұрын

@@PatrickMay4dProof 🙏My pleasure, you are always welcome to @krissosful:)

@jessexb Жыл бұрын

thank you for your hard work.

@conmes3077 Жыл бұрын

😉👍🏻

@TheJacobyou Жыл бұрын

so good info thanks 🙂👏

@ayan13yxq Жыл бұрын

you are the master!👍

@PatrickMay4dProof Жыл бұрын

Wow, thanks

@madisyntrevor354 Жыл бұрын

*promosm* 😋

@journei0021 Жыл бұрын

thank you for your video, now I know we need some adjusment when exporting .dwg format from archicad. I want to ask something if I may, do you know why the format choices can't change (it turned grey)? so now it stuck on .pdf format, it would be very helpful if you know the solutions! again thankyou for your video!

@ghassankanaan1767 Жыл бұрын

What I find weird too..is why doesn't he Slab has the option of "SHOW TO FLOOR PLAN RANGE" as the Walls and Beams have

@PatrickMay4dProof Жыл бұрын

I actually wish all tools had as flexible options for stories to be included on as the slab tool does. walls and columns only options being home story or all relevant means juggling floor plan cut plans to define relevant stories

@ghassankanaan1767 Жыл бұрын

👍👍👍

@conmes3077 Жыл бұрын

👍🏻

@mahmoudqenawi7100 Жыл бұрын

Hi Patrick, There's sub element arrow tool which let you modify morph edges.

@PatrickMay4dProof Жыл бұрын

yes, I'm sorry I didn't mention that in this video; selecting the sub element KBS is cntrl+shift. even isolating a sub element (edge/surface) and deleting will sometimes delete the entire element. This work-around has been my solution to that glitch

@conmes3077 Жыл бұрын

👍🏻

@ayan13yxq Жыл бұрын

Cool trick! Thank you Patrick

@PatrickMay4dProof Жыл бұрын

You're welcome!

@conmes3077 Жыл бұрын

😉

@paulofukuta 2 жыл бұрын

Hey! Is it possible to add another 2D symbol besides this circle? I refer to AutoCAD vegetation symbols. And that you can also change your measurements. Thanks!

@PatrickMay4dProof Жыл бұрын

yes. if the 3d and 2d share an origin, or you know a few modifier commands (add/rot/mul), you can draft and save a 2d symbol as an object, then copy/paste 2d and 3d together

@jeregamm 2 жыл бұрын

Awesome. Thanks for sharing. I really need to start using the shell tool more oftern.

@PatrickMay4dProof Жыл бұрын

yeah, the shell tool is a game changer; especially for revolved shapes

@ayan13yxq 2 жыл бұрын

Dear Patrick, Where is the slack group? Can I join in? THX.

@PatrickMay4dProof Жыл бұрын

sorry for my slow response (I don't check youtube comments very often); I sell monthly slack subscriptions for on-demand q&a and training sessions. you can email me at [email protected] for more details.

@ayan13yxq 2 жыл бұрын

Thank you!

@PatrickMay4dProof Жыл бұрын

Welcome!

Ең жақсы KZbin

Пікірлер