Mitas E09 front and rear

@@LUK1SLC4 thank you 🤘

Thanks ❤

Thank you very much for your support!❤

Su viskuo aš spėju😁

Jonavos rajonas

Dominator GP1

@@LUK1SLC4 :o i was looking for this one and now i know how it sounds, Thanks!

There is a speed sensor on the front wheel, its on the left side of the axle, the inner ring in the sensor is broken. Your issue might be different

Thank you!

😮😮

No, the motorcycle broke :(

The oldest has 56000km

Thanks, Mitas E09 front and Mitas C02 rear :)

@@LUK1SLC4 Thank you very much.

Yep, that's the only thing that broke on the Freewind hehe

Ola amigo sou do Brasil e tenho uma ano 2000,me mande contato do clube da Freweend

Sadly, I can not find a link to this music as it is taken from the GoPro Quik App as the GoPro Originals soundtrack, it's named "You Know".

@@LUK1SLC4 ok no problem, thank you :)

Yeah, slipped😀

Labas, ačiū 😁 Negaliu pasakyt nieko blogo apie XF, vis dar turiu jį. Keičiau tik dėl daugiau galios ir nes norėjau lengvesnio. Aišku XF važiuoklė nebuvo visiškai pritaikyta mano važiavimui, bet visgi darbą atliko puikiai, ramesnism važiavimui tikrai rekomenduoju😁

O išmetimas tikrai įkaisdavo iki raudonumo, pas maneęs ne orginalus išmetimas kuris automatiškai paliesindavo visą mišinį dėl geresnio pralaidumo. Kiek domėjausi reiktų riebint mišinį. Patikrint vožtuvus taip pat rekomenduočiau. Be to XF oru aušinamas tai jam reikia judėt, todėl stovint tikrai įkaista😁

Šiaip po jūsų video ir apsisprendžiu xf’ą pirkti, kad galėčiau sodyboje savaitgaliais miško keliukais pavažinėt 😁 iki jūsų lygio, kad ir kaip norėčiau toli dar pirmas soft endūro bus 🙂 Šiaip nedaug ir tokio tipo kontento lietuviškų video yra aišku norėtųsi serijų po minimum 45min., kiekvieną dieną kaip serialo 😁

@@Splin73ri5 smagu girdėti, kad kažką įkvėpiau😁 miško keliukais, į sodybą nuvažiuot ir panašiai tai XF pats pats, puikus motociklas pradėt važinėt softenduro. Yra FB grupė Suzuki XF650 Freewind lietuva, ten kartais pasidalina skelbimais, pakalbam apie gedimus pasidalinam patirtim😁 o dėl video tai deja šiemet labai mažai laiko turėjau važiavimui, tikiuosi ateinantį sezoną video pakepsim daugiau 😁😁

Where can I find more info about that plastic sprocket?

I loved this bike as well, it is unbeatable, but now I also have another bike but did not sold the XF

Hi! I used Mitas e09. It is not the best, but it did the job

Hey! I'm using Mitas E09 on the front and Mitas C02 on the rear :)

Thanks❤️

Hey there! It highly depends on the tires you are willing to install, i had mitas e09 so there were no issues, my other friends had bulkier tires so they needed to raise the fender a little bit

@@LUK1SLC4 alright we'll see when they arrive then! Thank you very much!

If I remember correctly this is a Leoshi handlebar, I did change it only because I have bent my original on. But this one is thicker so it handles crashes better :)

@@LUK1SLC4 is it a fat bar?

@@naikala11 No, it is not a fat bar, it was the same measurements as the original one. But the bar walls are thicker.

Jo, bandysim

@@LUK1SLC4 mes ir kilsim, susirašom gal per kažkur?

Thank you 😊

Honestly, I almost did not use it with the original exhaust, but it felt more responsive, and maybe a little bit more low end torque. Also, FLAMES 😃🔥🔥

@@LUK1SLC4 thank you i thing to put the same exhaust in my freewind too

@@naikala11 But keep in mind that the GP1 exhaust is really loud, you should consider a db killer with this exhaust

Vis dar gyvas ;)

@@LUK1SLC4 o Gurilovic išmetimą pakeitėt, kiek pastebėjau? 😅

@@kelkcierka965 nee, vis dar su gurilovičium😃

Neužmušamas šitas, tik gaila kad tepaliuką degint pradėjo🥲

Everything can be an Enduro if you try hard enough

@@LUK1SLC4 maeby R6?

@@piniu1986 seen someone do it ;)

Tauragės rajonas😉

Duodam :)

Prieky E09, gale C02

Redline 😄 I have an aftermarket dominator exhaust which is basically straight through so I think that's why its spitting flames

@@LUK1SLC4 thx :)

@@LUK1SLC4 We loved your videos, it's awesome that you're going to use freewind for that. As I see, you regularly answer the questions you are asked. Can you tell us if you have changed the geometry settings or the shock absorbers? Was the ground clearance sufficient? Friendships

@@user-ib3lt2xv2g Hey! Thanks for watching. Currently I have changed the bike to KTM LC4, but for Suzuki I have changed the front fork oil to higher viscosity, but I cant remember which was it. Also, the rear shock is from DR650RSE so the bike is stiffer and higher

@@LUK1SLC4 thank a lot for your answer ! Yes, I saw that you were now driving in ktm... of course it's more powerful and lighter. That's a bit why we didn't subscribe... we like the Tom Barrer side when you used freewind at the limit! Greetings from France 🇫🇷

Nice to hear that :)

I'm using a GoPro HERO 10

I started riding with stock suspension, only thicker oil in front forks. Later my rear shock died, so I installed DR650 rear shock

@@LUK1SLC4 This is interesting how this shock match the Freewind as the DR 650s stock rear travel is around 260 mm while the Freewind has only around 160 mm. Thanks for the clarification! The Freewind came to my radar somehow and seems like a very good durable bike for medium-distance travel and some off-road sections. I have the V-Strom 650, 1st generation with a stock suspension but it's way too heavy and incapable even in light gravel roads...my heart hurts when I hear all the clanking of the forks.

@@lyubengeorgiev1751 Well there I have set the preload on the DR650 shock to minimum and then compressed it for a bit before installing, this may be causing a little more stress on the bearings but I really needed more travel and stiffer rear shock. But there was not other modifications needed to fit the rear DR650 shock. The XF is pretty good for offroading

@@LUK1SLC4 I will definitely find one to try it. Thank you very much for the great videos and have always safe adventures with it :)

@@lyubengeorgiev1751 Sadly, the XF will have to go soon as I have a replacement for it already :)

Well, the plastics do not break easily, but they are really easily scratched

Px tie plastikai

Thanks! ❤️