It’s literally the same playbook. Remember when the media made fun of him for talking about coyotes? He could show you people a video of Biden Harris and every politician you think cares about you raping children and praising Satan and you people wouldn’t even blink. You’d say “yep that’s what I stand for!”
@drunkingsailor23592 күн бұрын
Rare for a honda on a craftsman mower.
@drunkingsailor23592 күн бұрын
I think lawn boy or snapper did something simular years back.
@stevenz85193 күн бұрын
😂
@danielscott91373 күн бұрын
Either....
@harrisonb2973 күн бұрын
Not bees brother 🥶 them some wasps
@DougJohnson-om3uw3 күн бұрын
Everything thing is a lie
@1yabeyabe4 күн бұрын
Who's going to tell him those are not bees?
@shybri19694 күн бұрын
I had bees in my shed, but had no idea that nest was in the chute 😮 I rolled it to the street with an active nest it it 😮😮😮
@frankiefixdiy4 күн бұрын
that is too funny. Hope you enjoyed the video Good stuff.
@gordonpalnau44406 күн бұрын
Great reveal 👌 I will attempt this on my own mower! Thx
@frankiefixdiy5 күн бұрын
Thanks Gordon, you can do this!
@bobstanden65796 күн бұрын
My mtd mower wont run with one of those fitted Any idea way ? Bob
@frankiefixdiy5 күн бұрын
Are you saying it won't run with the rpm meter hooked up? I am not sure what you mean, please be more specific I will see if I can help.
@barenekid969517 күн бұрын
Zep industrial strength Degreaser from Home depot is Significantly better than Simple Green. Even takes carbon off of pistons.
@frankiefixdiy17 күн бұрын
Excellent feedback! Thanks 'B'.
@ggwoutdoors2a18 күн бұрын
90% Iso alcohol or denatured alcohol, won't harm the plastic tank.
@MrTIGERH175219 күн бұрын
Try Pine Sol, cleans great, will not damage plastic. I dunk whole carburetors in the stuff, and it cleans everything, but does not even damage the gaskets or diaphragm's. Partial disassembly works best. Try it in an ultrasonic tank for even better results. Simple green at full strength cleans even really nasty greasy plastic things, with out harming plastic. We keep a barrel of it at work to clean plastic parts of refurbished copy machines. Tim
@frankiefixdiy19 күн бұрын
Nice suggestions Tim! Thanks for posting.
@_droid19 күн бұрын
Put some kerosene in there for a few days. It won't harm the plastic or anything else if it's gas-safe. Also if you need to remove heavy grease like bearing grease, nothing beats kerosene.
@frankiefixdiy19 күн бұрын
Thanks for the idea! great idea. In this area it's hard to find kerosene but I used to use a kerosene heater all the time until a truck stop near the house doubled the price then stopped selling it.
@Slim142323 күн бұрын
Hi. Did you get that digital tachometer off of Ebay? How did the tachometer stay attached to the lawnmower cover? Is it magnetic or have a adhesive backside? I need a tachometer because my pushmower is running both too fast at times, and too slow at other times.
@frankiefixdiy22 күн бұрын
Here is the link to the Tachometer, it's pretty cheap. I just attached it with tape or I believe they provided a zip tie so you can attach it where you want to. Just click the link below to order it. amzn.to/4cGUACA
@frankiefixdiy22 күн бұрын
I also have a video here using the same device which explains a little bit how it works and how to turn it off and reset it. kzbin.info/www/bejne/q3ezdJuaZdWVmqMsi=vWyGsh8i2jBSxtbs
@greenmarine5Ай бұрын
Simple green is Dark Green, that must be a different application
@frankiefixdiyАй бұрын
how do you mean? That is the official simple green product there on the table, what other simple green exists?
@frankiefixdiy24 күн бұрын
Actually I did notice that, the classic simple green was really green, they probably watered it down to save production costs.
@mikehigby7897Ай бұрын
I heard Hippa has good carbs. I personally tried 2 different aftermarket carbs and the setting keeps changing on me and now I'm having a flooding issue so I had to unfortunately resort back to the more expensive OEM Zama
@frankiefixdiyАй бұрын
Thanks for the feedback!
@kimchee94112Ай бұрын
Lacquer thinner would take all the junk out but it will eat and destroy plastic. Degreaser or hot water mixed with power dishwasher detergent.
@campbellpaulАй бұрын
I like the way you think! It's good that you didn't use solvents that could potentially harm the plastic, right off the bat. I'm really sold on my concentrated degreaser that I bought in bulk about 20 years ago, that I still have some left. Awesome is another dollar store product that I have great respect for.
@frankiefixdiyАй бұрын
thanks brother, it is coming along for the toro 521, tank looks good time to see if we can get it running, it was free with parts in a box, so i have to sort it all out. What degreaser are you using. Thanks for watching my friend.
@campbellpaulАй бұрын
@@frankiefixdiy I have been using a concentrated product called clean & simple. It's theoretically like simple green, only it smells like carpet cleaner. I use it mostly on the patio, but also have used it in the past on foam air filters and small engine carburetors. I bought it because it's supposedly nontoxic when diluted.
@khandymann2 ай бұрын
very helpful..thank u
@frankiefixdiy2 ай бұрын
Glad it was helpful!
@crystalann64672 ай бұрын
what Carburetor did you use
@frankiefixdiy2 ай бұрын
hello! just get the model number off your weedeater then go to amazon and type weedeater model and carb kit. I think as I remember I had one laying around, its been a while.
@NoahLadd3 ай бұрын
I own one I believe 17 years old. Its been used and abused all these years and it keeps going I cant believe it still runs. Before purchasing I was buyins a walmart special brigs every spring
@frankiefixdiy3 ай бұрын
Nice Noah, it is a heavy duty when things were built to last. I am restoring a Toro 622 snowblower currently, total teardown, I don't know if you use them where you live but if that is something interesting it will be done in a month or so. Thanks for watching!
@jacobpoucher3 ай бұрын
Yikes
@congreet_universa3 ай бұрын
Linkage was installed incorrectly. It’s supposed to be installed in the hole from the bottom going up and to the bottom again. The way how you did it is just dropped the linkage in to the hole, and it’ll come loose later because of vibration.
@frankiefixdiy3 ай бұрын
Yes, thats why I did a followup video a few years ago directly after the original video. Thanks for watching. Link Below. kzbin.info/www/bejne/qmHEoWSretilfcU
@SN-rd7zw3 ай бұрын
Please help how do I find a plastic piece to replace mine on a free fireplace I got. It's the piece that is the background right behind the logs
@frankiefixdiy3 ай бұрын
You would have to get the model number and google it, then maybe a parts list will show up for it so you can identify the part that is broken.
@MichaelMakin3 ай бұрын
Do you have a link for your new parts? Just got me one like this free and want to get her running.
@frankiefixdiy3 ай бұрын
Hipa SRM 210 Carburetor for Echo... www.amazon.com/dp/B019OZBSJ8?ref=ppx_pop_mob_ap_share
@chrisrees70543 ай бұрын
Put some gas in it!
@shaunlaufer88314 ай бұрын
Do you have a video how you connect to caliper?
@frankiefixdiy4 ай бұрын
It was tough to film but there is just one bolt for the brake line and two bolts to remove the caliper, it is pretty straightforward. I do have a new video soon of replacing a rear caliper where the view is a bit better.
@campbellpaul4 ай бұрын
I really do like your unorthodox solution to this problem. Factory rubber gaskets tend to not like today's gasoline one bit.
@frankiefixdiy4 ай бұрын
Thank you sir, worked out very well and has a solid seal to it. Thanks for the comment!
@TimsWorkshopTJY4 ай бұрын
Probably throw this one away someday too when I buy a new fireplace but for now trying what you did. I have all the components out and just tested the fan which works just straight to AC power. I want to wire up the heating element too so the fan and heat both come on but there are two black connections? do I jump both with the hot wire? I see the ground is coming off the fan transformer to the heating element, so I believe it's already grounded. Just need power to it but not sure about the two black connectors? I'll be looking this up but if you know please share. Thanks
@frankiefixdiy4 ай бұрын
hmm, it has been a while. I would use a multimeter test for continuity on those black wires, if there is continuity i would not hook to AC power directly to it. I thought I wired the heater in my video, I would have to look back, or it could be the black is wired through a high temp sensor so it cuts power like a switch if temp goes over a set limit (limit switch)
@TimsWorkshopTJY4 ай бұрын
got one right now that I left the fireplace shell in the RV for looks but removed all the components and in the garage. We plan on buying a new one but the boards on these like you say are not very good from China. Was thinking about trying what you do for fun on the old parts to see if I can get them working less the board so glad I found your video. You mentioned about putting in a temperature control too. Basically, a rheostat. Have your tried it yet and if not do you have some tips on how to do it without a board?
@frankiefixdiy4 ай бұрын
Thanks Tim, no I ended up throwing it away myself to save some space but I did recycle it and enjoyed a few years of it first.
@frankiefixdiy4 ай бұрын
Welcome!
@dennisbruns31554 ай бұрын
Great video - followed your instructions and mower started on first pull after not starting. BUT it has started leaking from the red bulb and white breather plug on the side of the carburetor that slots into the mower frame. I took carburetor apart twice and reassembled, still leaking as described. Any thoughts? thanking you in advance
@frankiefixdiy4 ай бұрын
it sounds like a float or float needle issue, like it is getting too much fuel, was the float filled with gas? sometimes the plastic floats fill with gas at the seams and so it won't float and push the needle with the rubber tip up to seal the hole and stop the flow of gas to the carb.
@scottdunn45064 ай бұрын
Did you find them both at the same house
@frankiefixdiy4 ай бұрын
The toro and the eager one mower were found at the same house. The lawn boy a neighbor threw away.
@kraizil5 ай бұрын
Spark plug
@frankiefixdiy5 ай бұрын
Yes in a sense it is the same principle, just for a furnace to ignite the pilot and main burners.
@phillipthethird425 ай бұрын
It's an igniter for a gas furnas . ...and the ignition coil is working just fine.
@ZipKickGo5 ай бұрын
I can't wrap my head around the idea that my lawn-boy mower, same engine, brand new, will not start. It's never been easy to start. If I manually prime the carb by pouring gas or spraying some gogo juice into it, it fires off no problem, so what the hell, how could it be the carburettor that's brand new. I was thinking of slightly increasing the jetting but if by just cleaning it works, I don't get it.
@frankiefixdiy5 ай бұрын
I have experienced this as well, it seems tipping it on it's side to the left for about 10 seconss or more then pulling the rope seems to let the gas flow into the carb.
@frankiefixdiy5 ай бұрын
seems like a fuel delivery issue.
@DocHoliday-to6kp5 ай бұрын
Great Video thanks. Don't forget to burp the coolant with that hex plug next to the power steering yellow cap. It must be done to avoid air pockets and overheating. Loosen it a couple turns and idle the engine till bubbles disappear.
@monroemando5 ай бұрын
Thanks for the great video! I'm going to attempt this on my 04 Liberty tomorrow... I'll be referencing your video. 😅
@Plus9dB9965 ай бұрын
Awesome.
@frankiefixdiy5 ай бұрын
Thank you sir.
@LatinoenPittsburgh5 ай бұрын
How much do you charge me to do the same with liberty 2006?
@frankiefixdiy5 ай бұрын
Are you in pittsburg?
@cHAOs95 ай бұрын
I just started the video, that looks like a brand new mower covered in dust.
@frankiefixdiy5 ай бұрын
tell me about it, I can't believe someone would throw it away. It took some time but years later I still use it, starts every year even though it sits most of the time, I mulch leaves in the fall with it, saves a lot of bagging. Grinds them all up.
@frankiefixdiy6 ай бұрын
😂
@tanaichagedeon72476 ай бұрын
I like this 👍🏾
@john_thorpe6 ай бұрын
What are the sensors called that start the shredder when the beam is broken by paper??
@frankiefixdiy6 ай бұрын
Hi John, I think its called a paper input sensor or automatic paper sensor.