Group Imaging Channel

Пікірлер

@mostlikelywedoitservices6926 21 күн бұрын

Looks great. Nice design.

@mostlikelywedoitservices6926 21 күн бұрын

This one from chair back quarter back. With tree placement. Why did you go so far to the right? I don't know the view angles pulling up toe the building so that is why I am asking.

@kristinebalagtas8062 Ай бұрын

What kind of cardboard is that?

@groupimaging Ай бұрын

it is coroplast (brand name) specific material is "fluted polypropylene " same material used to make all political signs and yard signs.

@kbcr8tions Ай бұрын

Where can I get the easel

@groupimaging Ай бұрын

anyone who has a cnc router can cut it out. I made my own, but now am out of business. you have cut out the shape in coroplast and then cut halfway through where you see it fold. also cut out the tabs with cnc if you can. otherwise you could do this by hand with an excto knife. Sorry I can't be of more help

@seglite5305 10 ай бұрын

how you printes the patter ?

@christiantardieu7561 11 ай бұрын

What is called the part that you guys have put on the back of the letters to hang it on the wall

@groupimaging 11 ай бұрын

they are called studs

@christiantardieu7561 10 ай бұрын

@@groupimaging Hi , I have look for studs every where on amazon or for signage on the web but I could not find this material Could you share a link or a place where I could find these "studs" please thank you again

@groupimaging 10 ай бұрын

I found right Terry. They at letter pads www.montroy.com/com/item.php?item_no=11%2F2PAD&item=11%2F2%22+LETTER+SUPPORT+PAD+

@anaarbulu4342 Жыл бұрын

Gracias!!!!❤ por fin alguien con una idea nada complicada y fácil de hacer.👍🏻

@DjCopezz Жыл бұрын

Amateur

@nickolas9375 Жыл бұрын

Mind if I ask what you charged for this install?

@abdoulazizdembele314 Жыл бұрын

good

@mulyonos1445 Жыл бұрын

Produk dan pekerjaan yang bagus! Saya Mulyono dari studio Astaka Aditama Jakarta, pengin tahu dan membutuhkan bahan "hard coating eps styrofoam for props". Bisa dibantu kah?, dimana bisa saya dapatkan/beli? Terimakasih.

@gabiallati2976 2 жыл бұрын

well done , so happy for your work. what kind of cellecone is it ?

@user-hx5vh9uh2n 2 жыл бұрын

Any idea how to repair a wall full of holes from letters removed on a stucco wall?

@groupimaging 2 жыл бұрын

Sorry no

@johnstefanik4116 2 жыл бұрын

What is the heat gun and attachment you are using?

@groupimaging 2 жыл бұрын

It is a tool from 3M and uses just a standard heat gun. I think the 3m tool is about $400

@Jimothythe2nd 2 жыл бұрын

What kind of hardware is this? Where would I buy these parts?

@groupimaging 2 жыл бұрын

it is all off the shelf parts. the alumunum is 1.5" sch 40 the holes in the ground are 2" abs black pipe about 24" long the fittings are a product called speed rail from www.hollaender.com/

@micro963 2 жыл бұрын

Nice sign thank you for sharing👍👍👍how thick are the letters?

@groupimaging 2 жыл бұрын

.250 alum and tapped holes

@Taesha5160 3 жыл бұрын

Any banner could install like this?

@groupimaging 3 жыл бұрын

we gave up on this, it was too hard on long runs to get the ripples out of the print on the wall.

@Bolsa340 3 жыл бұрын

Which is the vinyl used? thx.

@groupimaging 3 жыл бұрын

I think just a standard calendared vinyl. Not made for block. But it worked ok

@BryanRodriguez-uk6ub 3 жыл бұрын

What machine was used to create the vinyl graphic?

@groupimaging 3 жыл бұрын

Hp 360

@bloopentertainment1380 3 жыл бұрын

How was this made

@groupimaging 3 жыл бұрын

we used 2lb eps foam and created a hollow box and glued it together for the body. then we made more pieces on our cnc router with the detail and glued them to the faces. we coated it with a bedliner spray machine for a hard coat and then hand painted it. I hope that helps.

@lukebaskerville621 3 жыл бұрын

what type of vinyl is this ???

@konangivijayalakshmi6030 3 жыл бұрын

How much gap is sufficient for letters Pls say

@joefletch3946 3 жыл бұрын

What kind of feeds and speeds are you using? Also, what type of endmill are you using?

@mannyaguilar67 2 жыл бұрын

It's an oscillating knife not a router bit (end mill).

@xfsart4437 3 жыл бұрын

any idea if the polyurea comes to be applied by brush?

@groupimaging 3 жыл бұрын

Sorry, it cures in 10 seconds when part A contacts part B. not possible to hand do it. requires a $25k machine that pressures the chemicals to 2000psi at 165 degrees to then spray out of the gun, then cures after mixing in the nozzle of the gun in less than 10 seconds.

@qw6939 3 жыл бұрын

I saw some interview and randomly thought “what does these red carpet/media conferences backdrops printing look like” this is exactly what I was looking for when I looked it up on here!

@litsmixtv 3 жыл бұрын

Nice work sir beautiful design

@sabrinanorris1042 3 жыл бұрын

What machine do U use

@groupimaging 3 жыл бұрын

we use a Multicam 3000 cnc router. equiped as a swiss army knife so we can do all kinds of materials from aluminum to coroplast. ours was $130k, you can get one cheaper from them in the $80k range that will do this all day.

@brendamcalpine1341 3 жыл бұрын

Where did you find the post? How long are the segments and how much does it weigh?

@groupimaging 3 жыл бұрын

We make Tradeshow displays a the posts are a part of our other stands. You would not find this readily. We used 1.25” alum tubing and sewage the ends to 1.125” so the slide into the end of the next pole. The base is 2”x 3/16”x12” aluminum flat bar. We turn the post on a lathe and drill and tap it to screw it to the base from the bottom

@BellaviaSigns 4 жыл бұрын

Fun video but hard to sit thru without sound or music

@Lime_1509 4 жыл бұрын

Do u do video game charachter cutouts

@leonardodasilva4112 4 жыл бұрын

So this is regular banner material ?? What glue did you use and how long will it stay up? Also fid you remove the staples aftrr install

@narayanrane3757 4 жыл бұрын

How to remove this nameplate

@groupimaging 4 жыл бұрын

You are correct and if that is a fear you can have an usher with gloves hand out all of the servings so no one who is not sterile touches the other cups

@antiochbaptistchurchenoree8723 4 жыл бұрын

Love the disposal part, but I have a problem with the initial pickup. When the people pick up their cup, there is the possibility that they are touching other cups, and one person could reach their entire hand down in there and contaminate the whole bunch.

@tripleRdesign 4 жыл бұрын

Awesome 👌

@doyouworshipthemaster 4 жыл бұрын

What's the min thickness you can use for the aluminum?

@groupimaging 4 жыл бұрын

they need to be thick enough to get threads on them for the studs. I would say best at 1/4" but you might be able to do 3/16" aluminum. we did some thinner ones and almost pushed the studs through the front.

@kidsstudynow6901 4 жыл бұрын

Motion sensor door ...add a motor to the top like at a supermarket.

@kidsstudynow6901 4 жыл бұрын

Every is still touching it.

@Rico-qy8cg 4 жыл бұрын

Very good design scheme, as a board manufacturer, let me learn a lot.

@groupimaging 4 жыл бұрын

What board do you manufacture?

@danrapp2497 4 жыл бұрын

just 2 issues to consider. is it ADA compliant and void the compliance of the existing handle and how will people know how to use it ? most will just grab it ?

@groupimaging 4 жыл бұрын

Dan, we have added decals both on the handle and on the door frame to illustrate how to use it. as far as ADA, you can still use the existing door handle to open.

@danrapp2497 4 жыл бұрын

That's awesome thanks