FixModBuildEXTRA

Пікірлер

@gabrielnobrega4521 8 күн бұрын

what material your table is made of?

@FixModBuildExtra 7 күн бұрын

The repair is being done on my microscope base plate

@animenerd32 8 күн бұрын

Thank you so much this is very helpful. Sub to your channel

@FixModBuildExtra 7 күн бұрын

Thanks, glad it helped!

@JamesMac-gj3fi 10 күн бұрын

Good job. The first one I did I ripped a few pads.

@jorged0712 8 күн бұрын

A $40 hot air station goes a long way for stuff like this.

@FixModBuildExtra 7 күн бұрын

Yer I thought I rushed it at first but did ok thankfully!

@JohnAnderson-km1fb 13 күн бұрын

Don’t forget cpu check

@mecksg1 20 күн бұрын

can i use a different sd card then move the stuff over to my main one when im done?

@FixModBuildExtra 17 күн бұрын

The sd cards cannot be put into another Switch once it has been in a different Switch

@prod.temporaryy 29 күн бұрын

Do the two side legs carry any function other than holding the button down?

@prod.temporaryy 29 күн бұрын

As in if the two side legs have snapped off but the back ones are still attached would I be able to solder or use a small amount of epoxy on those legs to stick them to the board firmly?

@FixModBuildExtra 24 күн бұрын

I think they are used for ground too, the amount of pressure put on these I would probably recommend getting new buttons, I found these are the same as shoulder buttons out of Switch joycons so they are cheap and easy to get. Hope this helps

@fu1r4 Ай бұрын

Kill the music, please!

@FixModBuildExtra Ай бұрын

I like it :)

@kidsalex13 Ай бұрын

when i boot into emunand, and go into settings my switch just says system update is ready, no version info

@Aanimelandia Ай бұрын

my wont proceed booting after choosing emunand it shows atmosphere logo then black screen help!!

@catastros87 Ай бұрын

If you keep the ps5 horizontal, you are good for at least 5 years. Liquid metal tends to solidify over time, but it still makes contact over the surface molecular level .

@FixModBuildExtra 24 күн бұрын

I have taken a few ps5's apart and all have had dry spots, some worse then others, laying them flat has to be the best option?

@rayvonclose4603 2 ай бұрын

Hello when i click launch it says no main boot entries found

@haha11158 2 ай бұрын

you saved me a few hours of stuggle thanks.!

@ventrue6516 2 ай бұрын

I've been trying to fix display connector, but no matter what I got black screen after replacement.

@FixModBuildExtra 2 ай бұрын

I struggled a lot until I got a microscope. Basically one of your pins wont be making a connection, they all need to be making a solid connection.

@ventrue6516 2 ай бұрын

@@FixModBuildExtra I don't have a microscope if that's my only problem. I use my eyesight or macro on my phone . I also pre-tinned the connectors on the board but nothing helpedm

@juancelzeg.mu.3555 2 ай бұрын

Is it a Nintendo Switch Lite or the normal one or the Oled one?

@FixModBuildExtra 2 ай бұрын

This is the regular Switch v2/v1. Can get a mod chip for lite and oled.

@donnynapatok981 3 ай бұрын

I experienced metal liquid several times get dry spot on my ps5 I am tired of respresd it I have replaced it with thermal grizzly PhaseSheet PTM so far so good

@kennethluton302 3 ай бұрын

I removed all the liquid metal from my PS5. I replaced it with Thermal Grizzly Cryonaut. The Xbox Series X and the PS5 have the same processor. The Xbox Series X has thermal paste on the processor, so I tried it in my PS5. No problems for the past 3 years. Only a few degrees hotter than liquid metal. No chance of shorting out my PS5, because thermal paste is non conductive. A huge win in my case! I advise everyone else to do the same. Replace the liquid metal in your PS5 with thermal paste! When the liquid metal runs out and fries your motherboard, don't say that you were not warned!🤔😁😁🤔

@FixModBuildExtra 24 күн бұрын

Thanks for the comment, I might take a look at this in the future.

@SajalKMitra 3 ай бұрын

Thank you so much brother!

@CommanderBeefDev 3 ай бұрын

heres whats next, throw it in the trash its a slow piece of shit and small, arch linux with package suyu-bin, youre lucky i told you that much, totk with 60 fps mod at 1440 smaa and fsr super scaling

@FixModBuildExtra 24 күн бұрын

Millions of people cant be wrong?

@CommanderBeefDev 24 күн бұрын

@@FixModBuildExtra poor and stupid dont maske em right

@zodiachild36 3 ай бұрын

where ddid you get the Tinfoil folder ?

@FixModBuildExtra 24 күн бұрын

google tinfoil to download, once installed should create.

@VyperRx 3 ай бұрын

Is there a way to switch between modded switch and back to normal?

@bayfinest1938 3 ай бұрын

Yes

@FixModBuildExtra 24 күн бұрын

You need to setup emunand, that will do it

@Iron1222 3 ай бұрын

And after that how can i system update?

@FixModBuildExtra 24 күн бұрын

if using emunand, official side update normal, cfw side use a program called daybreak

@Iron1222 24 күн бұрын

thanks

@xp3rsnake15 4 ай бұрын

great videos you explain really very well but if I understood correctly we will never be able to enjoy our games that have to be downloaded from the internet online ? If I want to play a game online do I have to buy the cartridge or buy it on the Eshop?

@FixModBuildExtra 4 ай бұрын

With emunand, you can play online on the non cfw side, I just never play or connect online to the cfw side.

@adrialthegoat2446 4 ай бұрын

once i switched back to my un modded switch can i turn my wifi back on and airplane mode off?

@FixModBuildExtra 4 ай бұрын

When you have emunand setup, I have wifi on the unmodded side and airplane mode on the modded side

@androidfanatic6528 4 ай бұрын

Should I still download any OFW software updates if prompted in the future? Will it break CFW?

@FixModBuildExtra 4 ай бұрын

@@androidfanatic6528 Downloading them on the official side is ok, just dont update the cfw side until its safe to do so.

@FixModBuildExtra 4 ай бұрын

@@androidfanatic6528 Updating the official side is ok, never update the cfw side until you know there is an official release out

@riuneharu 4 ай бұрын

the microsd ca be also be formatted to fat32 using hekate

@FixModBuildExtra 4 ай бұрын

Thanks, I was not aware of this

@keepitshort4208 4 ай бұрын

How to add dlcs and updates ?

@FixModBuildExtra 4 ай бұрын

The same, add them like adding the backups

@toddleychaos7698 4 ай бұрын

The partition setting will that be the same if let’s say I use a 500gb sd card? Also is do I need to do this if I want to backup my game cartridges? I bought a hard modded switch with atmosphere and hb menu but the guy told me there isn’t a way unless I make the emunand in this video.. true or not? I just want to play make backup games.

@FixModBuildExtra 4 ай бұрын

Yes, if you use tinfoil, when you open it with a cartridge in it will ask to back it up.

@toddleychaos7698 4 ай бұрын

The partition setting will that be the same if let’s say I use a 500gb sd card?

@SalarMajed-dw1ir 4 ай бұрын

Good gob brother

@geoffreyjohnstone5465 4 ай бұрын

Very nice video which allowed me to get to the end of the video very easily. Many thanks. My question is...what do I need to do next lol? I have no idea where to go from here.

@geoffreyjohnstone5465 4 ай бұрын

Actually, forget the original comment. I just replaced the Tinfoil folder with the latest Tinfoil installer, then after installing Tinfoil I can now access files via the USB C port. My Switch Lite just constantly says cant find server when trying to go online

@FixModBuildExtra 4 ай бұрын

I never try online with the cfw side so cant help with that

@geoffreyjohnstone5465 4 ай бұрын

@@FixModBuildExtra Wondered how to use the freeshop without it but I have it working in Airplane mode

@jacquesmazieres5081 4 ай бұрын

😊

@frogomg420 4 ай бұрын

So i can pirate games with it ?

@baydirman5854 4 ай бұрын

No no make backups of your games* big red man gets angry at the word "pirate"

@AsdrenK 5 ай бұрын

i insert the sd card with the HATS folder it still shows me "no sd card" instead of launching Hekate

@FixModBuildExtra 4 ай бұрын

Either a bad sd card, not copied correct or there is an issue with the sd card slot

@adagames75 5 ай бұрын

When I copy the hatspack folder into tolhe root of my sd card , certain files fails to copy , how can i fix the issue please help me .

@FixModBuildExtra 4 ай бұрын

Probably download again

@oraliafigueroa1876 5 ай бұрын

I have a switch that is hard nodded and on the screen at 1:57 but now won’t turn on. What can I do?

@blenls 5 ай бұрын

can i have a bigger microsd card? for example 300tb?

@FixModBuildExtra 5 ай бұрын

yer

@GoopRoblox 5 ай бұрын

hey! i just modded my switch and i was wondering how to switch back to cfw after switching to ofw? do i just restart like normal and it will boot to hekate, or will i have to go in rcm

@FixModBuildExtra 5 ай бұрын

Depends if you have a mod chip, if you do when you turn it on it boots to Hekate. if you use an rcm loaded you will need that to boot to cfw

@Project_Dreadman_official 5 ай бұрын

Yo just to let everyone know you can connect your WiFi on Emummc with no problems. Hats blocks communication to the Nintendo servers and blanks your console’s serial number. But you don’t have access to the eshop or can update you games but if you edit exosphere.ini file and the system_settings.ini file you can get the eshop back an update your games. Also if you are banned on Nintendo’s servers Emummc is useless.

@Goodgamer78 5 ай бұрын

What microscope did you use?

@FixModBuildExtra 5 ай бұрын

This one: kzbin.info/www/bejne/l5K8qnSFhM6Zhdk Did a review on my other channel, it is really good!

@angelofdeath0203 5 ай бұрын

When I try to launch the CDW EMUMMC I run into the following error. "Error while loading fss0 atmosphere/package3 wrong ini cfg or missing/corrupt files! Failed to launch HOS! press any key..." I have tried to relaunch and reboot and keep running into this issue. Any solution that comes to mind for this?

@Project_Dreadman_official 5 ай бұрын

Redownload the hats project. If you still get the same error just use sysmmc CFW. It’s the same thing and you can play the games you bought on the OFW side

@Project_Dreadman_official 5 ай бұрын

Also make sure that you set up Emummc correctly just like in the video

@angelofdeath0203 5 ай бұрын

@@Project_Dreadman_official thank you! I will give that a go and see if it works 🙂

@Project_Dreadman_official 5 ай бұрын

@@angelofdeath0203 ok np

@angelofdeath0203 5 ай бұрын

Great video! At the end if it asks if you want to start software of update does it matter if you update the software or should you not do this?

@FixModBuildExtra 5 ай бұрын

I wouldnt, always update offline

@stoogysteven2667 5 ай бұрын

What does this do?

@FixModBuildExtra 5 ай бұрын

Reballs a Switch cpu

@diamondsandteatimewithniki8805 5 ай бұрын

Does anyone know if there’s a max limit on sd cards for switch homebrew I did a 3ds recently and it was recommended not going over 128 cause there was image issues with custom themes and such ik 128 it’s recommended minimum for switch but I’m just wondering if there’s a point that’s deemed ‘too much’ for the switch

@FixModBuildExtra 5 ай бұрын

I have read people using 512gb, not sure on higher as its not readily available but I think it will go higher.

@diamondsandteatimewithniki8805 5 ай бұрын

@@FixModBuildExtra thank you for confirming!

@victorpacsai1524 4 ай бұрын

1.5 tb from mig dummper site@@FixModBuildExtra

@javierprados9662 5 ай бұрын

I tried with 2 sd cards and both failed, they are now corrupted without solution

@FixModBuildExtra 5 ай бұрын

Thats a shame, I have done a lot of these now and never had a single corruption.

@mohdfaizal2953 5 ай бұрын

Hello..can u do video about how to solder back sp2 capacitor 🙏 i'm accidentally knock off that capacitor during modchip installation

@pedro_franco 5 ай бұрын

Great video, thanks for sharing! 👍 Just leaving my suggestion for a future video: please consider another background music and also showing some more the final result at the end of the video.

@FixModBuildExtra 5 ай бұрын

Will do, thanks

@i.e.2 5 ай бұрын

Should the SD Card be from san disk company or it doesn’t matter it’s work from any cd card??

@Project_Dreadman_official 5 ай бұрын

As long as it is a notable SD card company

@berniasd012 3 ай бұрын

just make sure that it is fast enough

@ChespinGator 5 ай бұрын

Very good video 🔥, can you do a tinfoil video setting up and protecting from servers?

@Project_Dreadman_official 5 ай бұрын

Hats already protects you from the servers

@ChespinGator 5 ай бұрын

@@Project_Dreadman_official ok thanks, I use the checker and setter anyway but is it automatic built in on atmosphere?

@Project_Dreadman_official 5 ай бұрын

@@ChespinGator well it depends. Are you using the hats pack?

@ChespinGator 5 ай бұрын

@@Project_Dreadman_official yes it's a April one I think the April or June one,

@Project_Dreadman_official 5 ай бұрын

@@ChespinGator yeah then it’s gonna protect you from the server

@skrilla.scratch 5 ай бұрын

Awesome vids.... Any insite in switching out battery port on switch?

@benlo202. 5 ай бұрын

This was very helpful.

@onelinkgadget 6 ай бұрын

kzbin.infos1qfjQ_uGy4?si=3IF0btpQFybQ7lkj Thanks man 😅

Ең жақсы KZbin

Пікірлер