im asking about stainless steel 316

Thanks for your comment, the answer to your question is yes! Please reference submittal 17.01 for more information. If you have more questions reach out through our live chat or ask a question feature on our website.

Gracias por su interés en Victaulic. Comuníquese con nosotros por correo electrónico a [email protected] para que podamos ayudarlo a comunicarse con su equipo de ventas local. Podrán proporcionar soporte de productos y capacitación a nivel local. ¡Gracias!

Thanks for reaching out, The Style 31 is designed to join AWWA sized pipes that match in outside diameters. The Style 31 is not designed to transition between two different outside pipe diameters. Please use the link below to see our product submittal for more information. www.victaulic.com/products/style-31-awwa-coupling/

Control valve probably mounted upside down. The charge line should be before the shut off so it can be drained of water but charge

@@salp5387 I was able to figure out that the air side solenoid was bad so the water was passing straight through an draining out...thanks for the help anyway

Your strainer is clogged on the back of the actuator (silver hockey puck) there’s a yellow brass collar coming out of the back to 1/2” threaded nipple elbow to a union. Take apart the union pull the brass collar and clean the ring(slips off the top) make sure you can put your finger on the bottom of the brass and blow air through the top so it comes out of the side holes. Put back in and vwalla.

Thanks for your comment! If you are referencing the bolt pads rotating during installation, this is caused by pressing down on the bolt with the impact tool. To avoid this, you need to prevent the impact tool from pressing down on the bolt pads while tightening the bolts. The bolts will bring the coupling housings together without pushing down on them. Please keep in mind that having the bolt pads off level will not impact the performance of the coupling in any way, provided it still meets our visual inspection criteria. Hope this helps!

Customer feedback is what drives innovation at Victaulic, we appreciate your comment! While this is not part of our current offering, we would refer you to our IGS™ product line for your 1” Fire Protection needs → www.victaulic.com/products/firelock-igs-groove-system-fittings/ We’d be happy to connect you with a local salesperson if you have any questions!

Thanks for your comment! The standard air pressure for a Victaulic Series 768N dry valve is 13 to 18 psi. Please refer to Victaulic submittal 31.80 and NFPA 13 to determine gallonage requirements and delivery times for your system size and application.

Cap falls off literally in the video genius

Thank you for asking. The forces experienced by buildings during a seismic event are more closely related to ground motion than the overall magnitude of the seismic event, so the measurement of peak ground acceleration (PGA) is generally used for seismic simulations. A single seismic event, measured with one magnitude for the overall event, will have many PGA measurements depending on relative location and the local ground conditions. This test had acceleration inputs of 1.3 g, meaning 1.3 times the standard acceleration due to Earth’s gravity. Typical accelerations during seismic events are between 0.05 g and 1 g.

Thanks for reaching out. Please visit the link below to get more information on careers at Victaulic. jobs.jobvite.com/victaulic/

We would like to gain more information to best answer your question. Please visit the link below to get in contact with Applications Engineering. www.victaulic.com/technical-questions/

This design is dumb becuz the gasket oxidise over the time and it leaks...

We would like to gain more information to best answer your question. Please visit the link below to get in contact with Applications Engineering. www.victaulic.com/technical-questions/

Hi, we've got those too, feel free to reach out to you local Victaulic distributor HDPE in 905-907 range, ST100 for potable water, etc.

Hi Muhammad, Thanks for reaching out. The lubricant is for installation purposes, not for sealing purposes. The lubricant helps the gasket/coupling fit into place and helps to avoid pinching of the gasket during installation. The compressive force created by the two coupling housings during installation seals the joint.

Obrigado por nos informar sobre sua dificuldade em encontrar o suporte local da Victaulic. Nós temos uma equipe de vendas no Brasil. Entre em contato com [email protected].

NASA is less relevant than Hollywood

Thanks for reaching out, there are no hydraulics or heavy, cumbersome tools involved with this cut groove. You can check out this animation to see how it works → kzbin.info/www/bejne/gpqlnZ2ui9pnabM

Thanks for reaching out, 2 - 12".

Hi Dominic, The RG1200 is designed to groove only carbon steel pipe. Our two most common copper grooving tools are the VE26 and VE226 roll grooving tools. Here’s some more info on each: VE26 Roll Grooving tool: www.victaulic.com/products/style-ve26-vic-easy-field-roll-grooving-tool/ VE226 Roll Grooving Tool: www.victaulic.com/products/style-ve226-vic-easy-field-roll-grooving-tool/