Hey y'all, how do you get the grey hi/lo beam switch separated from the white internal piece (2:28 - 2:56)? I've tried prying on it with flathead but worried that plastic will snap. Thanks 2014 Outlander 800R XT
@user-ub8uc8gq7r3 ай бұрын
Absolutely pathetic 😂 that’s why you need a REAL truck. #FORD
@arkansasmudkings99613 ай бұрын
It got it out? But why ford
@aidenlacey10344 ай бұрын
Are those the mud tires???🙏
@JayDean-n5w5 ай бұрын
So how did it ruin the truck as you mentioned in the Title?? You ruined your TIRES
@moochiezminizmedia6 ай бұрын
My only complaint with the video was the music was too loud to hear the instructions lol
@brentsims76116 ай бұрын
What’s the setup on that tj like is it stock wheelbase and how much lift on it
@arkansasmudkings99616 ай бұрын
@@brentsims7611 i believe it’s stretched 5 inches total. On ford 9 inch and a dana 44 front. Air locker rear and welded front. Roughly 4 inches of lift and 37 reds
@brentsims76116 ай бұрын
Got ya I have a 98 tj and I’m thinking about stretching it and like the look of this one
@JGpioneers6 ай бұрын
@@brentsims7611thanks, it's mine. Hmu if you want to know more details
@singletrackmarc8196 ай бұрын
(The stickies are so grippy) as they wont hook up for shit lol
@JGpioneers6 ай бұрын
Easy now. It's only like the 3rd trip on the tires. They aren't broken in yet
@РатмириЗаремапутешествиепоБашк6 ай бұрын
Тундра мощь💪👍
@joesweeney45277 ай бұрын
How to remove a skin tag
@davidd-eh2nu7 ай бұрын
Sounds like cupped or feathered tires and look at how steering wheel shakes at high speeds.
@danvanhoose67839 ай бұрын
Ruined that field.
@arkansasmudkings99619 ай бұрын
Grew back the next season
@Mudderking200109 ай бұрын
Your not supposed to lock tight the primary only the secondary
@makariussulit10 ай бұрын
I had a 1 tail light for everything and trying to delete it and run rear turn signals and only running/brake light for the license plate, do you have an idea how to wire this? TIA
@sharrky225310 ай бұрын
hey i live close to batesville
@sicodecsarl924910 ай бұрын
Hello, it is possible to mount the torq locker in a differential with abs for Europe, thank you!
@arkansasmudkings996110 ай бұрын
Unfortunately, these are not compatible with abs models.
@Eqinofc9 ай бұрын
@@arkansasmudkings9961 In my understanding they do fit, but you have to disable the abs
@shwugyytcodm11 ай бұрын
Tundra is nasty!!!!!!!
@boricua938 Жыл бұрын
The video is good but the music got to go get
@arkansasmudkings9961 Жыл бұрын
Yeah something happened to it when it got uploaded. Just didn’t realize until too late
@evan7476 Жыл бұрын
very interesting video! I just got a leveling kit put on from them this week(new struts and springs, not just a spacer/puck) and am wondering if I will run into similar issues down the road.. mine is a 21 trd offroad though(SR5 TRD OR), I dont know why that would have any difference from a normal non trd SR5.. would be interested if you heard anything about what makes it being a trd special? great video man!
@LandonJP07 Жыл бұрын
Why didn’t u have it in 4x4
@shwugyytcodm11 ай бұрын
He did, it’s the lsd trying to find traction. If you turn your traction control off all 4 tires would off been spinning especially on slicker surface. But tundra is a beast
@Patrick-pc5xw Жыл бұрын
I've got 32s on my 550 grizzly pulls the fine
@cjunior125 Жыл бұрын
Just did this! Thank you!
@dirf554 Жыл бұрын
Lots of variables for sure. But I run these on my Sahara with 18 inch rims and they have gotten be through some sticky situations. Being a truck and having a trailer may have added the challenge. But STT PROS’s are great tires
@MrNathan07 Жыл бұрын
That is a lot quieter than I was expecting from a M/T tire, that's a nice Jeep too.
@arkansasmudkings9961 Жыл бұрын
Thank you! And yes it surprised us as well. Expensive tires, but you get good life out of them. Perform similar to an AT offroad
@Synic08 Жыл бұрын
That just seems less fun than not breaking it and just cruising.
@arkansasmudkings9961 Жыл бұрын
Depends on the day and depends on the rig. If he had built it a little better, he would have had no problems in this hole. It’s fun to push the limits and see how you can improve your rig to make it through stuff that a “cruiser” can’t do.
@richardbygrave9117 Жыл бұрын
You look like you are missing the indent ball that goes on the end of the large spring
@twan4228 Жыл бұрын
Same exact thing happened to me lol. But I didn’t ride mine around after that 😂😂
@arkansasmudkings9961 Жыл бұрын
Yeah I can't believe he just immediately went to fire it up after sinking it like that
@luisgarci6815 Жыл бұрын
too much air they only need 7psi
@JoseGarcia-tr9mp Жыл бұрын
Man, sorry to hear about your problems, nothing more frustrating than dumping a pile of money into mods only to have those mods cause you problems that require you to spend even more money.
@maungsacca Жыл бұрын
I have these tyres on a pickup truck someone lent me. I put the tyre pressures down to 24 psi and reduced the noise dramatically. Will play some more. What psi are you using?
@RP-vr8pi Жыл бұрын
What exhaust set up you have? Sounds really good
@arkansasmudkings9961 Жыл бұрын
It’s a dual in, single out, flowmaster super 44. I forget the exact size, but I used factory tube size
@RP-vr8pi Жыл бұрын
@@arkansasmudkings9961 thanks for the quick reply
@olhunter8761 Жыл бұрын
I have a 6in Fabtech on my jeep TJ and I have no problems at all
@arkansasmudkings9961 Жыл бұрын
Completely different geometry between solid axles and independent suspension
@NattsluffyGaming Жыл бұрын
I think you are having an electrical issue with some wire thats not waterproof anymore, take a look at all the connectors and wires that go under like u showed. There is probably something …
@MarkKoekenbakker Жыл бұрын
It may not be your style, but it's the style of the 30's to the 50's. And many like that.
@arkansasmudkings9961 Жыл бұрын
I agree. Just wanted to have it the way I wanted while I still drove it around
@MarkKoekenbakker Жыл бұрын
Twenty-five to thirty pounds and you're swinging it in one hand? I do not think so. ;)
@arkansasmudkings9961 Жыл бұрын
🤷🏼♂️
@luv2thdk Жыл бұрын
incredible build
@judeprim3108 Жыл бұрын
yo
@arkansasmudkings9961 Жыл бұрын
Yes sir!
@jonesingaround3260 Жыл бұрын
I broke Friday evening. Missed the chance to wheel with yall
@arkansasmudkings9961 Жыл бұрын
One of my buddies did the same thing. Just gives you the excuse to build back better!
@arkansasmudkings9961 Жыл бұрын
I think I saw the picture of your knuckle ripped in half
@jonesingaround3260 Жыл бұрын
@@arkansasmudkings9961 it broke my kingpin bolts. It's been repaired and upgraded. Did 6shooter knuckles, and trunion bearing eliminators
@akl634 Жыл бұрын
I need this size’s 31/10.50/15 285/70R/16 available there
@arkansasmudkings9961 Жыл бұрын
It is available in the 31x10.5r15 but not that r16 size.
@akl634 Жыл бұрын
Available in 31/10.50/15
@arkansasmudkings9961 Жыл бұрын
Sure is!
@jonesey1981 Жыл бұрын
Thanks for taking the time to make this.
@arkansasmudkings9961 Жыл бұрын
Absolutely! Results vary, or course, but I figured that people would appreciate seeing how a real-world test would go on these trucks
@СергейКосенков-д5т Жыл бұрын
Very cool ZJ!!!😍 Hello from Russia!
@Durango214 Жыл бұрын
3 days later Facebook Market for sale never seen mud garage kept 😂
@johnlopez82798 ай бұрын
so true
@leadpilled5567 Жыл бұрын
I get 18.3 out of my Eco-boost F150 on 34X12 manually calculated not by the truck. And that’s prob 75% highway 25% city
@leadpilled5567 Жыл бұрын
Mud tires wear weird even when the truck is aligned properly inflated and rotated. You need to rotate every 5000 keep proper pressure. I’ve been running milestar Patagonia and I get 45k + out of a set on a F150. Doing a chalk test might also help
@arkansasmudkings9961 Жыл бұрын
I rotated these fairly regularly, but I've had much better luck out of other brands since this. I got 50k out of a set of nitto ridge grapplers, and I'm currently 20k into a set of nitto terra grappler g2s. They are holding up much better. I've heard good things from patagonia as well
@mikebarry3491 Жыл бұрын
With the wheels being a +1 offset how far past fender do they stick out. It was hard to tell with the flares on.
@douglastaylor716 Жыл бұрын
Is that 18 by 33s
@arkansasmudkings9961 Жыл бұрын
I believe these were 16s, but it’s been so long that I can’t remember for sure