I would like to watch 3 hour video ty.

A good day is when we learn something new. If it wasn't from your channel, I would have never attempted BGA repair. You do make it look like anyone can do it though. I would have to argue that for sure. It's not easy at all, especially if you shake the slightest bit. One little twitch will remove more parts from the board than you can replace. awesome recovery too! My dad was the same way when he would work on something. If it didn't work after he worked on it, he would tear it back apart and start troubleshooting it to find out why it still didn't work. He always said, "Never give up until it works, everything is repairable!" granted when he worked on electronics, the micro electronics weren't really around until later in his career, 50's - early 2000's.

Good job bro

Amazing work brotha

❤❤❤

what about the lifting heat ??

Bend haha I get it

you could offer free service and people will still find something you complain about. I let my customers know if they complain about the price, I will add another hour to the bill, and next time don't call me for anything. That probably really isn't the way to handle it, but I get sick of the cheap asses out there. Great recovery bro.

What flux did you use? Sir

Awesome Work! 🔥🔥🔥

Awesome video thanks a lot! what temps did you use lifting cpu?

Where can I buy that microscope? Sir

You're a GOAT. Nice work Justin.

Champ

That one had a few challenges it seemed like. Great work though. I don't understand why you took the template off the sandwich before you melted the solder? it seems like that would have caused more problems than it was worth, but It worked pretty good in the end and that's all that mattered. I found out the hard way about using too much heat on a processor already too. I destroyed a Nintendo switch processor trying to clean it up to reball it, and the whole time I was cussing you out, because you make it look like a child can do it. lmao! I do learn a lot watching your videos though. I do know that this Hakko soldering station is a beast, and it does the job 100% better than that cheap Yihua. I only use that for vintage electronics now. Awesome repair bro!

I can watch 4 hours video for swap or repair. thx bro

Good job hermano!

The goat! My brother ❤

Nice save Justin. You’re always doing solid work. Keep it up

Nice job dude 😎

I love the videos bro. Keep up the awesome work.

Hello, I have a question. My S21 also has water damage and wont boot up. I have a completely working donor phone. Is replacing just the UFS also possible or do the CPU and EEPROM always have to be changed with it

hi bro. what kind of glue do you use? And how thick is the copper wire?

Nice work! Whats the ballpark on a repair like this? My wifes 5A just died the other day and the shop I took it to said its dead and that data recovery attempts would $1200. Thanks

probably this hot air station stop working while he was trying to remove it 😂

I guess whoever was working on this board before might have noticed that he doesn't have the stencil for this CPU so he decided to stop half way through 🤷‍♂️

What a dumb@$$. WOW.. They are lucky they didn't rip any pads on the board and the CPU. Good work like always. This past weekend i just got done rebuilding a Galaxy S9 Plus. And replaced a Capacitor. Fun times.

nice save!!!!! ❤

Nice work man 👍🏾 stupid techs need to learn thier limits 😅

Which machine did you use for cutting the shield? Plz sir

I just rebuilt a Galaxy S8 Plus that i bought off Ebay not working. Now everything is new. OOPS **I DROPPED IT* ill send it your way and tell ya the cat pushed it off the table.. LMAO

The lighting is way better aswell!

Loving your vids mate. Could you say your air temps throughout your work? Would be much appreciated :)

I'm about to drop my phone across the room if it doesn't start working the way it should. lol I'll send it to you and fill out a ticket saying, "I just set it on the counter, and it stopped working...🤔 don't worry about how the screen got broke, it came that way..."🤣 LMBO! Lighting is much better. I'm sure once you record a few more videos you will get it dialed in the way you want it, but for the most part, it was pretty clear. Just to let you know. Don't buy polarized lights. if you have to have it polarized, you can buy a lens for that. way cheaper than buying a new light. I think it works good just the way it is anyway. Oh, by the way. I got my Hakko 203 finally. That thing is like a whole new soldering experience compared to the Yihua. I only have the temp on 320 deg vs 800 from the Yihua! Another great recovery too!

He's a witch, I tell you. A witch!

There is definitely an enhancement in the lighting but i guess using additional unpolarized light source will decrease the effect of the polarized light source , also i think your camera contributes to the issue , there are new models with auto light exposure control , i would recommend this model for you "Mechanic Mos 4k pro".

You did an excellent job 👏 Samsung made the separation of their sandwich boards a nightmare, they are using a solder alloy with high melting point to solder the two boards together not only that but they added glue to maximise the suffering 😅 By the way can you do a more in depth review for the U15 programmer ? What it can do and what it can't do ?

Fake im have ps 5 is your turnf of ps 5

Another great recovery. I don't know what you do with the old boards you remove from the phones, but there are a few companies out there that will pay you for them for the precious metal recovery on them. Might as well make a little cash of the trash I guess. lol

Wonderful 👍👍👍❤

I've seen so many people drop their phones in the water it's not funny. It seems like every time I go drop the boat in the Gulf, someone there drops their phone. lol I'll have to put a sign on the boat, "If you drop your phone in the water, send it to I Micro Repair. He will fix it!" lol I hope you are going to make a video on the PS5. As soon as I finish repairing six more Nintendo Switches, my next project will be repairing a PS5. I'm waiting on my new Hakko FM-203 to arrive, so I can't do much until it gets here.... woot woot!

You need some secondary lights aiming at your work at close to a 45 degree angle, to off set the glare

👍👍👍Nice ❤

Goddamn phone is trashed 😅 your the GOAT legend in California

You are amazing my friend👍👍

Another successful data recovery. I didn't think anyone had an S10 still. Nice job!

His ps5 doesn't have any room for fan

Nice ! Great Job Bro 👍doing same things here in Tokyo.

Surge101 beat me to the comment. I would use a dual gooseneck LED light. Depending on what you are looking to spend, you can find them for sale all over the internet. I've been an electrician for over 30 years and deal with lighting glare with clients all the time. An indirect light will reduce the reflection you have. I do have one queation? What brand of iron and heatgun do you use? I have been looking at a hakko and weller, but i don't know how well they are for heat transfer to the tip and especially the micro tips.

Gooseneck lights might be good for you , they are good to reduce the reflections, if you get a reflection just move the light slightly. I changed my ring light for them and saw a massive improvement. Great watch as always.