Its still a strat. Only bad if someone tries to rip u off
@thepropview95173 күн бұрын
Stealth camping and lights do not mix. Also, like he said, keep your cell phones turned to silent. Also keep talking to a minimum and whispering low as possible
@Lordbaccus3 күн бұрын
Why would I want a Fender guitar? let 1953 DIE already
@nikolaki12 сағат бұрын
😢
@madeyoureadmyname302710 сағат бұрын
What exactly are you playing?
@alanmeyers395721 күн бұрын
Ran when parked
@christopherfoote128428 күн бұрын
1 gram=1 milliliter.
@michaelwalker4799Ай бұрын
lol this waas fuynny at best this is tractor grade
@Poopyfingerz2 ай бұрын
Hae you tested it with magnets? 🧲😂
@pnwriverfisher2 ай бұрын
It’s called the Lone Jack
@TrueBlueServant2 ай бұрын
Chemistry it's very basic Chemistry :) Trump 2024!!!
@Enslin072 ай бұрын
I dont understand I have the same calibration weight and scale options If i choose 200g calibration option and place 50g scale on it still say pass? Why is this?
@KentuckyColonel2 ай бұрын
Sounds like it's a bad scale.. all these scales are chinese junk..
@kenlinden96213 ай бұрын
Tried to get all shots 'simultaneously'... but, plans go awry...
@kristincahill9883 ай бұрын
how do you test them?
@adammonahan6872 ай бұрын
He just showed. 10k acid. The acid will eat through plated material but not through gold filled material
@thewalkingrob88403 ай бұрын
More likely would be palladium not platnum in white gold
@KentuckyColonel2 ай бұрын
You're actually 100% correct
@koskey063 ай бұрын
Let me guess... You thought on eBay someone was selling $1,500 worth of gold for $25...... And your mad? Lol
@KentuckyColonel2 ай бұрын
Nope. I thought someone was selling $5 worth of gold plated copper as 18K... and I was right.. and shut this seller down..
@HighSierraBob4 ай бұрын
Home Depot has a 30% vinegar and will work faster.
@KentuckyColonel2 ай бұрын
Defeats the purpose of doing it with grocery store vinegar and sea salt.. I could simply use HCI or nitric and complete the task in 15 minutes.
@YoStu242Ай бұрын
I tried plain vinegar+salt method but it either doesn't seem to work or takes absolute ages using 10% vinegar (strongest I could find around here)
@goldsilverjunkie4 ай бұрын
Recording like 2pac 😂 hello from Chicago
@sasquachbigfoot90704 ай бұрын
I’ve asked this question on a number of different channels, and no one knows for sure - the questions is: did Ford on their 60’s and 70’s heads have the 3 angle valves and seats or were they all straight 45 degree valves and seats.
@KentuckyColonel4 ай бұрын
Good question... I would venture a guess it was a simple 45 degree cut and lap. To answer that question 100% I would try and find a head repair manual from the 1960's.
@MattsRageFitGarage3 ай бұрын
Every old Ford FE and Windsor stock head I ever worked with were just one angle on the valve job. Even a freshly rebuilt set of D8OE heads off my 351W reman long block are one angle and it's all freshly re done.
@johnny89racer4 ай бұрын
Cool vid :-) Do you set the 46 degrees from vertical (stem) or horizontal (seat)? Thanks.
@KentuckyColonel4 ай бұрын
I will have to go back and watch the video again to give you an accurate answer.
@JohnDoe-pv2iu4 ай бұрын
DOOE=D 1970s, first O last number of decade 0, second O is original application (don't know O off top of my head) usually C orT car or truck, E is part type, E is engine. That casting is a 1970 production iron engine block. It should be the early heavier/stronger block but you need to measure it, this could be a 9.2 inch deck height before Ford went to the 9.5 inch deck height. It will work fine but be aware of the measurements, they will effect parts selection and final assembly. The first tank should have Red Devil lye and Tri Sodium Phosphate and the second one should have clothes washing 'Soda' the first was where you were,(the paint department of the big-box store)( the second product is in the cleaner/clothes washing area of Walmart). What you are using is probably safer but a lot less effective. Put the metal can on an old grilled stoke up the Fire. Both baths will be done by morning. Be safe and Take care, -John
@JohnDoe-pv2iu4 ай бұрын
PS, I forgot to tell you... Have a big pot (like an old syrup kettle) full of real hot (was recently boiling) water, a couple of cans of WD40 and your air hose with a blower nozzle. Rinse with a cup of t h e water and a little brush or rag and blow dry with the compressed air. If you start seeing ANY Flash rust, go ahead and spray down the block with the WD 40. Start with the oil passages, then bearing areas and lifter bores and then the deck surfaces. It will prevent it from rusting and can be wiped off with the LAs Awsome from dollar general store, when you are ready to paint the motor. Ya'll Take Care, -John
@harrymills83684 ай бұрын
Ok, this is awesome. Very very cool.
@JohnDoe-kp8xu4 ай бұрын
What is the name of the jig that holds the grind stone?
@KentuckyColonel4 ай бұрын
A flat vice
@JohnDoe-kp8xu4 ай бұрын
@@KentuckyColonel Thank You
@jayquitlong47765 ай бұрын
Don't buy real gold online or else you might get scammed, it's better to buy gold plated the one that says pvd gold or vacuum plated gold it will last long and does not tarnish easily and a lot cheaper.
@user-lr6qn8oj4h5 ай бұрын
Lol
@dmon18545 ай бұрын
Hack
@NAFOARMY5 ай бұрын
Testing 1 spot may not be accurate 🤷♂️ id give it an AP bath and see if it leaves foils to recover. If it does, even at 14k foils, that's a big chain and should produce at least 1 gram id think. But if it singed like that with even a drop of 10k, id say its plated at best. Many people watching dont even know what GF is. I know the Colonel does. But many people still think it means solid gold, it doesnt people! Gold filled is generally 1/20th of the items total weight in kt gold. And that gold covers the outside like an extra, extra, extra heavy plate of gold. See example below. 1/20th 12k gold on a 20 gram necklace. 1/20th of its total weight would be 1 gram of 12k gold. Then, after processing, because its only 12k and 50% pure gold at 12k (out of 24 parts of gold), you have to half that 1 gram of 12k by removing other alloys. So you finish with 0.5grams of 24k gold from the 20gram 12k gold filled chain you started with. Or about a $32 payoff. Gold Filled is almost always worth more than sterling silver. If you find a buyer locally, it pays decent. If you sell Gold Filled lots on Ebay, people pay top dollar so they can refine them themselves. But eBay takes massive fees from sellers. So you must shop around, or recover the gold yourself. I can process a large batch of this stuff in 1 day. From recovery, to refining, to melt. Easier over 2 days, but i can do it in 1 day. AP bath is how id like to start it, if im in no rush anyway. My yields are always over 22k, but ive never refined 999 before that i recall. But if i process them 3x, im certain id hit 999 fine. But with only 22k solution to test, i cant tell? Its all pretty when im done. I sell it at 24k and my buyers are happy. I sell just under spot though, at 95%-98% of spot.
@richardsnyder48946 ай бұрын
Automotive battery acid is just 29% to 32% sulfuric. Much safer and cheap.
@jpbonhomme50516 ай бұрын
I'm going to try this with a lab vibrator
@Anarchy-Is-Liberty6 ай бұрын
Well, your first problem is... Ford!! No, actually they ARE precision machines (valve refacing machines)! But now I know why you Ford guys can't win races, it's all how you're doing things! ROFL!! The chatter on that valve you "refaced" is incredible! he he That thing ain't going to seal shit! Mid-range pitted? ROFLMFAO!!! WTH is that? ha ha ha!!
@marilynquiles22566 ай бұрын
lol mines says2000.00
@durtyt47706 ай бұрын
I don't get a mat phase with his ore running 130g ore 100g soda ash 25g potasium nitrate and 75g otc borax
@KentuckyColonel6 ай бұрын
I was too paranoid about a high viscosity/sticky pour to use that much soda ash but I'm going to try it...
@KentuckyColonel7 ай бұрын
Reading some neg feedback with this ore around the interwebs. Remember; if you buy ore, don't expect paydirt, because it's not paydirt material.
@themahoneymine7 ай бұрын
OK, that was cool.
@KentuckyColonel7 ай бұрын
The flash-over is cool
@JustKentucky7 ай бұрын
No free gold huh? Imagine that! 😅😅😅this dude made over $30,000 selling this stuff on EBay! I wonder how much that works out to a grams per ton equivalent? Suckers
@KentuckyColonel7 ай бұрын
I don't know if I would go that far as to call people suckers who buy this ore. If people have issue with Jason I am sure they will take it out on him in the EBay reviews.
@fakeufo7 ай бұрын
Jason certainly sold this on the premise of being able to pan gold from this ore and that's the only reason people would buy this stuff. There's no what they call "free gold" in this ore or very small amount like you stated. Thanks for the videos!
@KentuckyColonel7 ай бұрын
You make a valid point or two
@durtyt47706 ай бұрын
25lbs is an extremely small sample and most "ore" unless you're high grading isn't going to be rich. And the free gold in this ore is very fine in this stuff. I did a couple pans and was able to see it. when I bumped it up. But most of it requires a x40 loop to see individually. I bought 75lbs. Have processed about 50% down to -50 and am using a sluice to "speed" up concentrating it. So far I've produced 3/4 of a gram. Oh and I'm using a crazy crusher so it's taking a long time.
@themahoneymine7 ай бұрын
That was a good and scientifically objective test. You're getting REALLY good at this sir.
@KentuckyColonel7 ай бұрын
Thank you for the accolades... I do science for a living, so it comes easy, God's Blessings for sure!
No free gold in this material? At all? Well, that changes the game.
@KentuckyColonel7 ай бұрын
If a midget little pixie fairy could fart baking powder... that's about the amount of free gold I observed in this stuff.. Besides those two little pickers of course.. Rich ore though just not free milling.. or doesn't appear to be..
@harrymills83687 ай бұрын
@@KentuckyColonel It's not right my man he made it sound like this was panning gold. You can't pan this stuff and find anything but black sands, stupid pyrite. I'm not interested in smelting i just want to pan this stuff but I'm not buying any of this. That really sucks too i was looking forward to it but waited until you did these reviews.
@kelseyrainwater39187 ай бұрын
Did it have any stamps on it 14k stamp?
@KentuckyColonel7 ай бұрын
I think they were stamped..
@grahamh27587 ай бұрын
For cleaning just use an old drill bit & scotchbrite, you’ll spend 1/4 of the time and it’ll come out better
@KentuckyColonel7 ай бұрын
You're prob right! Thanks for the comment and please subscribe!
@KarlBretz-sp5ni7 ай бұрын
Okay you showed the dirty valve 4 times oh my......use a cordless drill and sit down Emory abrasive cloth I see a lot of pits mine didn't look bad.Started 3lb hammer extension & 7/8 socket put heads in a long cardboard box pop springs 2 minutes
@Kobewankenobiofficial7 ай бұрын
You sure that's the swift mine?
@KentuckyColonel7 ай бұрын
You'll have to read the book on why I think it may be... it's a complicated story but I back it up with a lot of evidence.
@Frost1776_28 ай бұрын
Those transistors/pills contain beryllium so be careful
@everettbass86598 ай бұрын
Ive been to Bell county Ky.Jonathon Swifts name is carved on a rock next to a road,Ive seen it and many many other signs and symbols.
@KentuckyColonel8 ай бұрын
This "lost silver mine" is said to be from West VA to Georgia, it's in ever eastern state in the US.. Lots of claims. Read the book if you get a chance.
@DCUPtoejuice8 ай бұрын
Exit wound on right side of head, bullet enters from rear and the movement forward is limited because John already was crunched forward and held there by his very tight back brace, then rebounds backwards. That doesn't mean Oswald shot the bullet, but the fatal blow came from the rear.
@bad406camaro8 ай бұрын
SMH Looking good or as good as you can is not the same thing as properly refacing a valve. There is so much wrong with this video. Please don't do this. Most machine shops charge only a few dollars each to reface a valve
@KentuckyColonel8 ай бұрын
It works in a pinch.. the jest of the video isn't a perfect deal here, it's getting it running if this is all you have available. Geeez
@harrymills83688 ай бұрын
Is it worth the price they're asking?
@KentuckyColonel8 ай бұрын
The bags they sent me were worth it... so far.. I'm not even half way through going through everything..
@harrymills83688 ай бұрын
Rright on! @@KentuckyColonel
@colin3518 ай бұрын
If I was gonna play with hot sulfuric and nitrates anyway, I would go ahead and distill a batch of nitric acid
@KentuckyColonel8 ай бұрын
This is easier than dealing with the distillation rig and cleanup.. It works, I wouldn't have believed it worked as good as it did unless I did it myself..
@colin3518 ай бұрын
@@KentuckyColonel cool
@johnhutchings51129 ай бұрын
You are out there
@KentuckyColonel8 ай бұрын
You have no idea how out there I am..
@lumilooxinternational35929 ай бұрын
The guy must have been really dizzy in there
@KentuckyColonel9 ай бұрын
Don't think there was a "guy" in this thing.. maybe a "thing" in this thing.. but certainly not a guy..
@bd50589 ай бұрын
If you set your vise to 46 degree then your stone is set to 44 degrees?
@Kakaporetail9 ай бұрын
Gold filled should be renamed to something more to how it actually is. Like, if my bottle is water filled, you would think it is filled to the neck with water. Not just lightly wrapping around the sides.