after this video went up they had to invent an emoji for the guy: 🐐
@Kelsiervin17 күн бұрын
thanks man! that really help!
@XianjuanjungleloveАй бұрын
you rock! so simple and perfect!
@jorje58965Ай бұрын
Wow, I don't even understand how it works, but it works. THANK YOU! And I was duct aping and bending metal and struggling for months.
@euphka7687Ай бұрын
Thank you sm man 🙏❤️
@livelifefamilyzoneАй бұрын
Aia's talent and love for music 🙌 Shout-out to the sound team, sounds good. 😊
@contechsound84014 күн бұрын
Thank you for appreciating.. God bless
@laksanardieАй бұрын
Terima kasih bang, sampean penyelematan bagi saya wkwk.
@user-sw8rc3gt8cАй бұрын
My repaired M50X's salute you. Thank you very much for sharing!
@Hairdresseroctopus22341Ай бұрын
THANK YOU SO MUCH, crazy how well this works. For those wondering about the size, some people here said a 2.5 mm works best but the ones I found near my place were too short, so I used a 3.5 and while it was a little harder to push through the slits they worked perfectly.
@starwolf7365Ай бұрын
Kinda works for me. But my zip ties on hand were harder to put through the gap and I needed pliers and to inverse the zip tie. Maybe you need something thinner than what I have to get the cross over of the zip tie to be just right to get the hinge to operate correctly.
@punishedsneedАй бұрын
Fixed my M50xs with this trick. You're such a hero for this, man.
@noober98704Ай бұрын
fantastic little fix, thanks a bunch! saved me the trouble of getting it repaired or paying someone to 3d print parts for it
@sheumack2 ай бұрын
Aug 2024 - Another set saved. Original ATH-m50, so already a 10+ year old pair. Thank you so much. This is a really elegant solution. When you start looking at the construction, the between the top of the headphone and hinge gets smaller as you open the headphones up. This puts just enough material in the gap to stop it opening too wide. But it also means you can still close the headphones up to fit in the drawstring bag. So all upside.
@Abyssalll2 ай бұрын
You just saved me 120 bucks. Thank you, brother!
@ammar62 ай бұрын
DUDE, this worked so well!!!!
@brianwhitehead86342 ай бұрын
This was so helpful, thank you so much!
@sakkomusic2 ай бұрын
Man, thanks for the tip! I've worn mine for like 5 years. One side was broken a while ago, but somehow I kept on working on them 😂. Yesterday both sides were broken so I was looking through different solutions, and your solution is I think the easiest, cheapest and most effective 🎉 God bless you, brother
@leonardoortega13023 ай бұрын
I am shocked at the simplicity and how well they turned out!
@adacskipper3 ай бұрын
Bless you man, you saved me $300
@mgtn933 ай бұрын
Thank you so much legend!
@wojciechrazik3 ай бұрын
It also work for other headphones! Thanks to you I've "fixed" Odio hinge! This is soooo brilliant!
@leventeszabo14514 ай бұрын
Thank You Sir, I had the same problem and i thought its not fixable.
@jvrdvd4 ай бұрын
thanks it works!!
@AmagrasMUSIC4 ай бұрын
You just saved me 250! Thanks!🙏
@axil60224 ай бұрын
perfect fix
@prod.oscarbeck4 ай бұрын
thanks
@danilbalashov43864 ай бұрын
Thanks!
@carlosbarbosa7935 ай бұрын
In my opinion all comparisons should be as similar or same conditions as possible. Said so, 16” K sweet are out!!
@arlwav5 ай бұрын
ur the best brother
@lujuanhurtado86645 ай бұрын
?? do you have the pair of quick beat zildjian hi hat 14" inch sized that were demo'd / recorded in with this u-rube video just curiously asking ...😊
@2punkkk5 ай бұрын
thank you!
@Kinziik6 ай бұрын
THank you!! 👍🏼
@stevenfederico25946 ай бұрын
What i play K cons.
@abrakadeep88106 ай бұрын
Thank you A LOT for this! :) What a fun and easy fix! :)
@DrFridge_6 ай бұрын
Thank you so much. Absolute life saver
@beepover6 ай бұрын
The best way is to throw it away and buy something better sounding!
@miguelito56026 ай бұрын
I found a pair of mx50's in the free bin and once they sounded amazing other than the broken hindge and leaky sound pads, I tried 3D printing like 7 diffrent things to fix this and spent at least an hour googling and a humble zip tie that took 30 seconds to find and install makes these things basically brand new. Thanks so much for sharing!
@mangosarefun7 ай бұрын
I WOULD SUCK IT IF I COULD!!!!! FULL HOMO I DONT GIVE A FUCK THANK YOUUUU!!! 🙏✨
@Rionugrahaputra7 ай бұрын
thank you
@BladeDoomer868 ай бұрын
Genius bro! Unfortunately the swivel on my M40x broke completely, so wasn't possible to use this trick. But now that i switched to M50s, I think I'll do this preemptively!
@ALSOGREATDBM8 ай бұрын
yooo try tuning ur snare drum sometime 😭
@jeromewilson8 ай бұрын
Amazing stuff! I'm very grateful :)
@DefinitelyNotZixie8 ай бұрын
After using my LE Dark Green M50x for many years, its hinges snapped a few days ago. I found this small piece of hard plastic on my desk and didn't want to throw it away because I knew it came from my stuff. I found out it's the hinges, and I'm so freaking disappointed. I'm glad I found this video to be the ultimate lifehack.
@TheDuxan8 ай бұрын
Thank you, it worked! For anyone else trying this make sure to get 2.5x150(or longer)mm zipties, anything thicker than 2.5 won't work and anything shorter than about 150 won't work either. Once again, thank you so much!
@kurolines78008 ай бұрын
Saved me $200, thank you!
@ItsExotic_YT9 ай бұрын
thanks bro
@prutser1329 ай бұрын
Thanks! It worked for me.
@ngunhleithawng32489 ай бұрын
Nan awnmawi tum-dan ka lo zohnak ah cun thungai-thlakin vun țang deuh uhla cu hlasak khalah nan thiam zet ding tiin ka lo hmu.
@prodcrumley9 ай бұрын
At first I was like, how is this going to work, but it works so great!! Thanks for this :)
@shrainmusic10 ай бұрын
Dude, you are a genius. I just broke the hinge on mine. Gotta find some cable ties lol