Yes, if you apply too much solder, you can make a joint that will fail under vibration. Not all that different from crimping improperly.
@jidissafi7413Ай бұрын
I wonder what it takes to get a clean delamination of the copper layer on PCB stock. God knows it doesn't seem to have any trouble lifting off an old board when you don't want it to. 🤬
@djtot7312 ай бұрын
How many cocaina it can bring?
@franciscoe.99894 ай бұрын
Great Job How far can it go with payload and battery capacity?
@Extremflug4 ай бұрын
Hi. I guess a 0.5kg payload would be possible. Range should be 5-10km I guess. It is not really a fast plane...
@Schlipperschlopper4 ай бұрын
Ich habe auch so einen schönen alten Fimag: kzbin.info/www/bejne/i2jZd3ulZ9Fknbs
@easystar1234 ай бұрын
Hi there, I have two Calmato Sports 40 planes and a friend is selling his Calmato Sports 60. Is it a well built plane and is it strong? Do you enjoy flying it? I have an 91 fourstroke which I think would be a good engine for the Calmato Sports 60 if I do buy it. Regards Aidan
@Extremflug4 ай бұрын
Hello Aidan, this is a good plane, you should buy it before someone else does. It needs some improvements, though. I added a link in the video subscription. In that thread I uploaded many images so you can see what I did.
@frankmabo39405 ай бұрын
if you test a 12v rated pump to 24, you are overvolting it's current capacity considerably, but in this case you undervolted to 50% the 24v rated pump which will barely have enough current to push it.
@svenwinter98968 ай бұрын
Welcher Motor ist das?
8 ай бұрын
Bitte luftfilter drauf machen 👌🏻
@Extremflug8 ай бұрын
Ja, das war eine Vorsichtsmaßnahme. Wir haben den abgeschraubt, um die Ansaugung mit einer Holzplatte verschließen zu können. Nachher ist die Regelung der Einspritzpumpe festgegammelt oder so, und das Ding geht durch und wir gucken alle blöd... Gibt's ja genügend Videos von, Stichwort "Diesel runaway". ;-)
8 ай бұрын
Einer der wenigen mit Motorenverstand Nicht gleich Vollgas 👌🏻👌🏻
@heikos9298 Жыл бұрын
War der Hammer. Könnte ich den ganzen Tag anschauen. Danke fürs mitschleppen und aufbauen
@TMaxElectronics Жыл бұрын
das kommt mir doch irgendwoher bekannt vor :P danke fürs filmen :D
@adilabusafa Жыл бұрын
أهلاً وسهلاً ومرحباً بك-يتعذر التعليق-لا أعلم .
@dawdawsd1 Жыл бұрын
Sorry to say but this is an overengineered and not very practical tool. Here is one that is both practical and very easy to build not to mention will cost less than 10 euros. kzbin.info/www/bejne/q5SWc5WJnb5_ppI
@aldoluparelli5257 Жыл бұрын
Stupendo volo spettacolare, ottimo pilotaggio Vorrei costruirlo per favorr Hai il file del disegno? 😊😊
@fungames24 Жыл бұрын
Some cheap tips are made from 100% iron. Once oxidised, they become quite useless for heating or wetting solder. Copper tips work fine even with an air gap. The heating element bumps against the tip at the front.
@parentteachernight Жыл бұрын
Why on earth is this in my feed?
@madvelila Жыл бұрын
Does the soldering tip need to bottom out so far that the bottom of the tip touches the cheramic heating element?
@khalidlraqi Жыл бұрын
Wieviel kostet das Bitte
@peternaumilkat5543 Жыл бұрын
😊Endlich kapiert!😊
@893516 Жыл бұрын
Zanima me pobuda imam isti ovakav genetator
@frikkiesmit327 Жыл бұрын
Personally i wont make mine like that. I feel it must be simple tool and one must make clamp quicker. Yet your tool remains unique and has beautiful clean finish and it still gets job done.
@TheLukas1966 Жыл бұрын
schönes Ding 👌🏻
@Dr._Spamy Жыл бұрын
Aus Sicht der Birnen, dürfte der Softstart vermutlich auch noch ein Bisschen schneller gehen. Aber das wäre vermutlich nur schwer zu realisieren, ohne daß irgendwas anfängt zu schmoren. 🤔
@Vassilika1 Жыл бұрын
Na ja, das liegt vielleicht auch an den zusammengetüdelten Servo-Kabeln. 🤣 Ich habe immer noch eine FC-18 jetzt in 2022, und werde diese wohl bald wieder benutzen. Mein 13J Sohn und ich sind wieder am Modellfliegen.
@cap2c484 Жыл бұрын
That's a really interesting test and I believe clearly shows the benefits of a crimped joint, especially in an application where there would be flexion or vibration.
@jannadem Жыл бұрын
I took video of the real thing, the same concept in Italy, in 1978
@user-ki9ez8wx7f Жыл бұрын
Nice video. Which voltage should we use, boss?
@rajeshpenta7735 Жыл бұрын
Exallent 👍👍👍
@aliasmari Жыл бұрын
Great 👍
@perseusaut2 жыл бұрын
this is German perfection
@StrzalaOstryPazur2 жыл бұрын
Ładnie wyglądający przerost formy nad treścią. To można zrobić znacznie prościej
@ivanveljanov30482 жыл бұрын
I use a thermal paste-arctic and get optimum thermal conductivity !!!
@BlessingsNFaith2 жыл бұрын
This charger won't let me charge my 3s battery it keeps saying input voltage lower than 11.5v
@benjamengabriellewis88182 жыл бұрын
Could you have just used thermal paste?
@danieltee77822 жыл бұрын
…fast unmöglich, vor allem, wenn man Zivilist ist… :D :D Sehr gut!! :D :D
@manlioalvarez43932 жыл бұрын
Hello Extremflug, one question I have a Kadet LT-40 plane, would you recommend this 15cc engine, do you think it would fit? I would really appreciate your comment as your videos are very good. Greetings!!
@Extremflug2 жыл бұрын
Hello Manilo, I just had a look at the LT-40's data, and it is nearly identical in size, but about 1kg lighter. So I assume the 10ccm version might be enough. You have to check though, if they are identical in weight or the 15ccm is just a tad heavier, you might go for the 15cc and enjoy the extra power. But, especially if you choose the 15ccm version, you absolutely neet to do the following: 1) Clear the space behind the firewall, I think there is a board midway to mount the tank on. Then apply generous glass fiber reinforcement connecting the firewall to the fuselage sides and bottom. Gas engines shake more than glow. 2) I highly recommend to use the Du-Bro No. 682 Motor Mount. Exactly this one! Try to source one via ebay, it is definitely needed. 3) Get a double-strut front wheel, like I did on my plane. Single-strut does not work well with the heavier gas engines.
@manlioalvarez43932 жыл бұрын
@@Extremflug I appreciate your information very much, it is very valuable, sincerely thank you. Greetings.
@dalewhitmore1432 жыл бұрын
How do you get the CH1 DC power supply. It does nothing when I push the button
@JamesPatrickKelleher2 жыл бұрын
Lots of people in the comments think this test proved the crip joint is better BOTH failed. You have to support the joint such that it does not flex.
@dondeivid2 жыл бұрын
Did you use OS91 Muffler??
@Extremflug2 жыл бұрын
No, this is a muffler from www.kpo-flugmodellbau.net. Since I was not satisfied with the exhaust position, I have since combined the stock muffler and a modified "Simprop Whisper 10-15ccm" muffler. Images are here: imgur.com/a/RSZaxI9
@SpaceFlamingo072 жыл бұрын
10/10 very smooth flight
@washingtonluizvasconcelos27402 жыл бұрын
Top. Congratulations.
@Mark-wx1ho2 жыл бұрын
I am thinking about buying the same plane and engine. Was it difficult to balance with the added weight of the engine?
@Extremflug2 жыл бұрын
Not that difficult, but I have two batteries 2s A123 26650, one for ignition and one for RC each. I put those as far back in the RC bay as possible. Now the plane is maybe a tad nose-heavy. But adding a bit of lead at the tail would be no problem, the weight would not be heavy because of the good leverage. But you really need to reinforce the firewall with a couple layers of glass fibre inside to transfer the load to the fuselage sides. Otherwise the engine might fly on it's own one day I fear. I have uploaded some build images for you: www.dropbox.com/sh/fqp5r3auail1dc0/AABvQAxkn0tm69IpfPF2Aq7Pa?dl=0 Please tell me when you downloaded them so I can take them form the server.
@Mark-wx1ho2 жыл бұрын
@@Extremflug Thank you for the info. That was very kind of you.
@Mark-wx1ho2 жыл бұрын
Downloaded. Thanks.
@kuyajayyoutubechannel63272 жыл бұрын
Can I use lighter?
@coryulrich64892 жыл бұрын
I think a better question is, who the hell is soldering a ferrel?