All the best John! We've just had our first hatch. Unfortunately only 4 eggs out of the 27 we put in the incubator. So it might be the other eggs weren't fresh enough. But love my 4 little fluff balls!

Hey Grace, it sounds like there may be a factory fault. Try plugging into a different power source to see if it makes a difference. If not, I would recommend contacting the provider.

Turn your CA level to like -1 and it should heat up more. I realized that by putting CA in negative, it got hotter

I covered with blankets this recently and it definitely helped. Had 4 hatch so far 😊

Yeah it works for sure it just needs the little humidity and temperature guage so you can monitor it . Have one in the top floor and one in the botton , and i also check the middle of both floors and closer to the walls of the incubator to make sure its not too hot or cold , temperature should be at least 99 towards the wall and 101-101.7 in the middle right under the fan , as long as it does not stay at a constant 102 in the middle it should be good because 102 is hot for the chicks and i dont put any water because it rains a lot where im from humidity should be around 20-30 in the first 18 days , after that add a bit of water untill the top floor hits atleast 60 humidity and check it constantly so it does not drop low and whatever you do DO NOT open the incubator its not worth saving one chick because all the others will be affected and could get stuck to the shell , only way you can open it is if its super humid inside and you can be super quick in opening it fast and closing it fast , this way i only had like 10-20 eggs that did not hatch out of the 112

@@gracemajor3343 i will try this thank you

I would also like to add that the incubator is very unsafe for the chicks in both floors because the top floor chicks can get their feet stuck in the fan and the ones in the bottom can hit their head on the spinning fan , i would recommend putting tape where the top floor is covering the fan and poking small holes in the tape to allow air flow and for the botton floor , the fan can be covered with like a metal mesh or something that has holes in it so it allows air flow and wrapping whatever you put there with wire so it stays in place so the chicks wont hit their head on the spinning fan i learned this the first time i used the incubator because a chick in the top floor got hit with the fan , he was bleeding a little bit but he made it thankfully.

Not sure... hopefully you won't need it

Yeah i think we might just get a generator instead i had gotten the battery for the two clips on the incubator that i thought it was gonna have but sadly it did not have it you got a good deal on that one i see all it needed was the built in light for the candling of the eggs.

Actually very tasty and not as hot as we thought

R240

120W

​@@mccainlifetnx so much. But please what's the difference between 110v and 120ws

The voltage is 195-245V not sure what the difference is between W and V but I'm sure Google will tell you 😉

@@mccainlife so grateful for your response

Not yet but we will be trying again soon!

That's a tricky one, you can try opening the incubator slightly to let some of the humidity escape but keep an eye on the temperature as you don't want that to drop too much. I hope you come right!

Try placing a barbecue stick in the lid and the incubator to allow it to pass through or reduce the humidity. This is what I did and it worked.

The incubator is great, easy to manage and we relly enjoyed using it, although we didnt get any chicks on our first round due to electricity issues we are hopeful for the next batch! We are posting our part 2 now! kzbin.info/www/bejne/qqPTk4WFo5WGsJI

Thanks so much! 😊

Thanks so much Kurt! We did look at a number of camp sites that side but difficult to find pet friendly. We're headed down the coast now, we're a bit behind on our videos 😅

@@mccainlife ahhh yeah that is the trick! Riverbend is pet friendly so maybe check them out the next time you in that area. Safe travels and look forward to your next post!

🥺🥰

Thank you 😊

Appreciate the feedback Rich. Thanks very much

@@mccainlife I wanted to comment more but I’ll message you privately instead.

We have something awesome planned 😁

😎

Thanks so much! Cool surname 😉

Thank you so much Steph 💓

We're so glad you'll be following along 😊

Thank you so much 💓

We mis you too! Thanks for the comment 🥰

Thanks Darryn! 😊

Thanks Bianca 😊

Thanks so much, we appreciate it! 🥰

After my video I struggled as well. When I went back to work I couldn't see the screen and it was awful. I completely understand where you're coming from! But it did get better, it just took long! I will do an update video soon. All the best with your healing, artificial tears were my best friend - keep using those to help with the dryness.

@@mccainlife Two and a half months in and life is doing a lot better. My vision started to really improve after two months. Still have dry eyes but they are getting better. My eye sight still struggles at shorter distances, but I can see almost perfect far away. Doctor said it's totally normal and that I should be better in about another month. PRK is deffinately a long game!

Thank you so much!

You won't be disappointed 😊

Wait for the jolion it’s amazing

@@SonicView09 even this one is good, tried and tested. No guarantee a new model the best, except in looks