Thank you, that's exactly what I need med to see!!!
@DIYwithMichaelBordersСағат бұрын
You are welcome. 😁👍🧰
@BobbyKoller7 сағат бұрын
Thanks
@DIYwithMichaelBordersСағат бұрын
You are welcome. 😁👍🧰
@minibike008 сағат бұрын
Use an air gun next time da
@DIYwithMichaelBordersСағат бұрын
Thanks for watching and sharing your thoughts, always welcome here on our DIY channel. 👍🧰
@tonya298113 сағат бұрын
This worked but my dryer turned back off 🤦🏽♀️
@abbiegc745617 сағат бұрын
I learned something new today, thanks sooo much!!
@itsmee81319 сағат бұрын
That was super helpful. It’s after 9p so I have to wait til tomorrow to try it but Thanks!
@DIYwithMichaelBordersСағат бұрын
We are honored to read this. How did the project go today?
@johnrisher895519 сағат бұрын
Great help, thanks for sharing this very informative DIY/ Mike! Really helped me with my son’s vehicle.
@DIYwithMichaelBordersСағат бұрын
You are very welcome.welcome. 😁👍🧰
@drysj21 сағат бұрын
What model and year is that sea doo? Anyone know?
@DIYwithMichaelBordersСағат бұрын
Thanks for watching. This is a 2003 Sea doo GTX with a 951DI engine. 👍🧰
@drysjСағат бұрын
@@DIYwithMichaelBorders thanks buddy. Good video👍
@DIYwithMichaelBorders43 минут бұрын
@@drysj We appreciate it. 🧰
@nadenehammond18122 сағат бұрын
Exactly what I was looking for. Best diy for replacement of the rollers on a sliding glass door.
@DIYwithMichaelBordersСағат бұрын
We are very honored to read this, thank you. Our mission continues to be getting the DIY community the info they need without wasting their valuable time. 😁👍🧰
@deboraramos4495Күн бұрын
Please help me! Im in Miami, rented a car at Avis and just bought a Sunpass portable at Wallgreens. When I try to create mey acount, the Sunpass website says that the cars plate is already associated with an another Sunpass acount. Do you know how to solve this problem ? Thanks!!
@richardperrin9374Күн бұрын
Great how-to video! A bit anal and slightly too careful, but a great video!
@ElfhogКүн бұрын
EVER heard of HVX??
@PaulAndrewMediaКүн бұрын
I really appreciate this video, our belt broke on the way home and I'm so glad we made it here. Battery light turned on, power steering turned off, and the car started to overheat. I'm glad this looks a lot easier than I thought it was going to be!! Appreciate you for making this 🙏
@DK1-wv8zvКүн бұрын
Any instructions on how to test the various components to determine which one failed? Or is the advice to simply replace them all at the same time when you take apart the unit?
@jeffnwv3976Күн бұрын
Is there a part number for the brake booster check valve? Can’t find one at our local automotive box stores. The Dakota has ports for 2 vacuum hoses. Can only find check valve’s with one port for one vacuum hose.
@andrewcarter9637Күн бұрын
Hello, can I use the circuit breaker to turn off power instead? There’s not a way I can easily get behind the dryer.
@andrewcarter9637Күн бұрын
Update: I did do just that and it’s working now. Thank you :-)
@MRBOSH680Күн бұрын
Bruh
@DIYwithMichaelBordersКүн бұрын
Thanks for watching.
@DanielEngsvangКүн бұрын
I have seen TWO "Professional" Husqvarna videos today, but NONE of them actually Showed how the string was wound at the end(the critical part) so i am very grateful that you put your time into actually Showing how it's done. Very well done indeed!. Cheers
@DIYwithMichaelBorders59 минут бұрын
We are very honored to read this, thank you. Our goal continues to be getting the DIY community the info they need without wasting their valuable time. 😁👍🧰
@blujay1982ifyКүн бұрын
Naw, I want a freight train horn!
@DIYwithMichaelBordersКүн бұрын
Freight train would be awesome too. 😁👍🧰
@nazmen040Күн бұрын
Excellent description but use a tripod so you can demonstrate with two hands.
@DIYwithMichaelBordersКүн бұрын
Good morning ☕️ we appreciate the feedback. We have since purchased a few tripods for the business. 😁👍🧰
@wainewizanthony7420Күн бұрын
I'll have to try this one day. By "this", I mean beef heart
@DIYwithMichaelBordersКүн бұрын
Good morning ☕️ This was a lot of fun, we recommend it. 😁👍
@DIYwithMichaelBordersКүн бұрын
If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases. Angus Beef Chart canvas: amzn.to/3WQW2hm Silicone cutting board: amzn.to/3UPutlL Heinz BBQ sauce: amzn.to/4bQAkxZ Stubbs BBQ sauce: amzn.to/4buPKbu Stubbs marinade: amzn.to/3VbUYn5 Taco Bell avocado ranch: amzn.to/3UNYGSp Silicone basting brush: amzn.to/3Vb1kDa Cast iron pan (Lodge): amzn.to/3wVEy8N GreenPan ceramic cooking set: amzn.to/3KdKTj4 Instant pot: amzn.to/4bpyLY8 Our Place Perfect Pot: amzn.to/4dRMsAU Mexican Coca Cola bottles: amzn.to/4by2Zs3 Happy Belly sea salt: amzn.to/3VdgwzH Webber grill: amzn.to/3wKW4MY Grill cooking utensils: amzn.to/3wCwBp8 Grill rescue cleaning pads: amzn.to/3KbdLZ5 Nightmare before Christmas movie decor: amzn.to/3yxhu0M amzn.to/4bOj5xr amzn.to/4bOVBIE amzn.to/3KekotY amzn.to/4bslQ7X ************************* 1. How to order a 1/4 cow - Standard order kzbin.info/www/bejne/hKjSoHd4eNapo9E 2. All of our 1/4 cow meat cuts cooked and presented kzbin.info/www/bejne/oHm5hYmngpuhqdk 3. How to oven-bake 1/4 cow beef ribs kzbin.info/www/bejne/gqPOZmyGaKx3rq8 4. How to cook soup bones to make soup broth kzbin.info/www/bejne/oqKxdKN7jLFsiJY 5. Cook 1/4 cow Chuck Roast in Instant Pot kzbin.info/www/bejne/iZjRmGaAdrR1ock 6. Oven-bake 1/4 cow Rolled Roast kzbin.info/www/bejne/b5jUlJpvfM6iabs 7. How to cook Beef Tongue in Instant Pot kzbin.info/www/bejne/iWHWZ2R_obqfnck 😎👍🧰
@garymilner2544Күн бұрын
Mike could you please give the part no. for the preload washer that you do not use again on the upper unit gear drive? thanks so much,
@DIYwithMichaelBorders49 минут бұрын
Thanks for watching, we can hopefully help. If interested in purchasing this product, visit our Amazon affiliate link below. I from qualifying purchases. Nut: amzn.to/3VrfdNs Washer: amzn.to/4aRpAyw 👍🧰
@jrobber999Күн бұрын
Thanks for the video! At 11:18 you show spinning the u joints to test the prop, mine won’t spin at all?! I actually tried 2 different units and neither can spin, is that normal? My out drive is a little different than yours, for example I don’t have a washer (with the screw) by the shifter. Is it normal for the u joint unit not to spin? My shifter only seems to go from the centre and left position and the prop always spins freely. Please help any advice would be much appreciated! Thank you
@steveboys3712Күн бұрын
My gear shifter rotates but does not lock or click in gear. Gearbox is in forward but wont shift into neutral or reverse. when i pulled it all down i found 3 ball bearings floating inside.. Are the Detent balls to lock in & out of gear. I have looked at loads of schematics but failed to find 3 balls in the parts listings.. Mercury 1987 115 HP straight 6 cylinder . Thanks in advance for any assistance
@dnappi85Күн бұрын
Your tone bothers me.
@DIYwithMichaelBordersКүн бұрын
Thanks for watching, we appreciate your feedback. 🧰
@DctrBreadКүн бұрын
video saved me much headache and money, guide was made thoughtfully.
@Norasbestyoutubechannel781Күн бұрын
I have a off switch for both batteries but still dyes. When the boat runs it shows its charging the batteries bc voltage climbs. But float on the water couple hours it's dead again. Batteries are less than a year old.
@ChanceYoungКүн бұрын
I have 2 TVs that I need to replace the screens on...... Kids 😅. But i haven't been able to find replacement panels. Where can I buy them? Where did you buy yours?
@renyaference36512 күн бұрын
I really really love this site. You guys have made a big help in hand to me. Thank you so much.
@DIYwithMichaelBorders2 күн бұрын
We are honored to read this, thank you. We are happy to hear we have made the big helping hand to you, that’s a true testament to the Power of DIY! 😁 The DIY community is the best, and our mission continues to be getting you the info you need without wasting your valuable time. You will continue to benefit greatly and save lots of cash over the years by making your projects DIY. 😁👍🧰
@Beatsnmotivation2 күн бұрын
You think you can do a 4 inch pipe
@DIYwithMichaelBorders2 күн бұрын
Thanks for watching, you may consider a reciprocating saw as well. If interested in purchasing this product, visit our Amazon affiliate link below. Iron from qualifying purchases. amzn.to/3Vs8UcL 😁👍🧰
@Beatsnmotivation2 күн бұрын
@@DIYwithMichaelBorders ur awesome thanks man !!
@DIYwithMichaelBordersКүн бұрын
@@Beatsnmotivation 👍🧰
@vision17072 күн бұрын
Thank you from 2024 . My machine is over 20 years old...thanks for sharing.
@DIYwithMichaelBorders2 күн бұрын
You are welcome, that’s awesome to hear. Hoping for many more years for your 20 year + unit. 😁👍🧰
@bendavidson64052 күн бұрын
Where can i get a service manual for my alpha 1gen 1 drive?
@DIYwithMichaelBorders2 күн бұрын
Thanks for watching, we can hopefully help. If interested in purchasing this product, visit our Amazon affiliate link below, I earn from qualifying purchases. amzn.to/4aOWHTR amzn.to/45ptgXv 😁👍🧰
@erikprestonTV2 күн бұрын
Just want to say, it is not easy to get that panel off. You should reupload the video to say otherwise
@DIYwithMichaelBorders2 күн бұрын
Thanks for watching, what troubles are you having? Let us know if you have any questions.
@kaymac2272 күн бұрын
Beautiful landscape! Love it!
@DIYwithMichaelBorders2 күн бұрын
Thank you. 😁👍
@ronaldinrio2 күн бұрын
Great, this works. On one of my cabinets though, the little lever at the back is not there, as it is has been removed. What is the best way to remove the door?
@doncheto90162 күн бұрын
hi i’m getting a new fridge tomorrow with ice make and water dispenser , installers are suppose to hook up the line and “set the temp” it would be in my best interest to have them move it to my desired location and just let it rest correct ? thank you
@DIYwithMichaelBorders2 күн бұрын
Thanks for watching, we would recommend that indeed. Keep us posted on how it goes. 😁👍🧰
@doncheto90162 күн бұрын
@@DIYwithMichaelBorders it came about 2 hours ago , im just letting it sit then tonight i will hook up everything, would you suggest hooking the water up first before plugging it into the electricity
@DIYwithMichaelBordersКүн бұрын
@@doncheto9016 Congrats on its arrival. 😁👍 Connecting the water line prior to connecting electricity is a better way to do it. 👍🧰
@brandiescott57862 күн бұрын
Do you know anything about replacing for un75tu7000
@DIYwithMichaelBorders2 күн бұрын
Thanks for watching, you will find that replacing your module for that tv model is pretty similar to the tv shown in this video. 😁👍🧰
@hapj95812 күн бұрын
Tip the machine back about 45 degrees. Take the pump filter facade off. A couple more screws from underneath/behind pump assembly. Three screws hold the pump on the housing. Put it all back together and test. Maybe 15 minutes if you're methodical. Oh, buy two pumps while you're at it. You'll need extra one soon enough.
@DIYwithMichaelBorders2 күн бұрын
Thanks for watching.
@2chill2worry2 күн бұрын
Great great step by step video! Saved me $$$ from hiring someone and I’m comfortable to do this on my own. Thank you!
@VijayKumar-nd6cg2 күн бұрын
Thank you so much .Finally fixed my garage door. 👍
@jpf83502 күн бұрын
Thank you for posting this. Had a friend ask for help with her 2014 Cruze because of a bad oil leak. Had no idea what it could be but this was the issue. Thanks!
@adamaguado2722 күн бұрын
Great video. Didn't miss a step, clear instructions, no bs. Thanks dude
@DIYwithMichaelBorders2 күн бұрын
You are welcome, we are honored to get this feedback. Thank you! 😁👍🧰
@DIYwithMichaelBorders3 күн бұрын
If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases. amzn.to/3x3KYmr 👍
@DIYwithMichaelBorders3 күн бұрын
If interested in purchasing tgis product, visit our Amazon affiliate link below. I earn from qualifying purchases. OEM Spark plugs: amzn.to/4c02G9g OEM Coil pack: amzn.to/3R9NzlN Dielectric grease: amzn.to/3KxCSW9 👍
@DIYwithMichaelBorders3 күн бұрын
A faulty PCV valve or worn out gasket will cause degraded engine performance! Below is a link to our video showing replacement of Crank/Valve cover. kzbin.info/www/bejne/rHjOlIKbYqyme7c If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases. Regular: amzn.to/3X1s0rh Aluminum option: amzn.to/3ySdQOV 😎👍🔧🔩
@thereddemongaming31093 күн бұрын
Thanks brotha
@DIYwithMichaelBorders2 күн бұрын
You are welcome. 😁👍🧰
@user-mc1dq3hl5i3 күн бұрын
Very thorough, and explanation.
@DIYwithMichaelBorders2 күн бұрын
We are honored to read this, thank you. 😁👍🧰
@luisbaez86593 күн бұрын
not even a spot on the carpet
@DIYwithMichaelBorders2 күн бұрын
Thanks for watching. 😁👍🧰
@ItIsColdHere3 күн бұрын
Thanks for explaining everything, especially the tape, as I will set up my bimini this week. Much appreciated.
@DIYwithMichaelBorders2 күн бұрын
You are welcome. Let us know if you have any questions. 😁👍🧰
@ItIsColdHereКүн бұрын
How did you decide where you wanted to mount the brackets to hold the bimini posts on port and starboard. Is it just a matter of person preference? And it seems like I could get the two brackets on myself and attach the bimini myself, but I would need a helper for the mounts the 4 straps attach to would have to be determined with the bimini upright in order to determine where the straps end and therefore where to mount the strap mounts. Does that sound right? I’m solo and my need to hire a helper. Thanks again!