Ca Tech shock tower brace Ca tech gusset kit (front of frame) Ca tech front and rear limit straps Front and rear sway bars removed Ct Raceworx high clearance boxed lower control arms Super ATV high clearance boxed trailing arms Rhino 2.0 axles all 4 corners GGB exhaust Whalen speed 160 wheel horse tune Aftermarket assassins stage 3 clutch kit for 32’s 32” sticky zillas RZR Sharp customs 120 wall DOM custom cage Just twisted the stick driveshaft this last trip so will soon have a super Atv rhino driveline and carrier bearing in it as well. Think that everything lol

Oh forgot the dragonfire doors but 100% do not recommend, they do not sell replacement parts for them you have to buy another set of doors if you damage any parts beyond repair

@@BeastModeSXS damn brother! That's quite a bit of extras! I just recently purchased a 19 x3 xds plain jane no extras and hardly no miles!! Been slowly buying upgrades. 32s, front window, winch, radio. Getting a rpm exhaust and some 4+3 offset wheels next!

Thanks man, when I break something I always like to replace it with an upgrade we tend to beat on her pretty good so the upgrades came faster then intended lol. Hell yeah man it’s a blast and can get pricey 😂 enjoy the hell out of that thing 🤙

Oh dang that stinks

Thanks! RZR sharp customs out of Sparta Kentucky built it for me.

@@BeastModeSXS Going to have to check them out! Thanks!

@Northwest35 he has a Facebook page last I knew it got hacked so if you don’t get a response look up Justin Frasure he’s the owner 🤙

Yeah she’s definitely low lol

It looks really good tho😅

To the wood for 1 second let off then about 1/2 to 3/4 finish her off lol. If you check my V-notch short I just posted that one was to the wood a tad bit to long from a boosted launch😂

It was the first time ever hitting it so I had to find the right line, there is a huge rock at the bottom my 32’s wouldn’t clearance for so I had to hit the left side and shimmy over to the right

I have not had any issues with rattling, they came with a nice rubber trim to run on the bottom edge of the door

Depends which one you’re talking about. I’ll tag them both so they can give you the rundown on them

This was a list I made for a guy that asked about mine before. It should be fairly updated to right now. A few things were different for this video, like i had 35 trail saws, instead of zillas, didn't destroy the bumper by this video, and this was the trip that broke my diff. CA tech radius rods Ca limit straps front and read because I don't run sway bars Super atv trailing arms 22+ rear knuckle Ct lower a arms Keller ball joints Race driven pads and rotors Super atv frame stiffener 22+ front diff because I broke the original 21 Was running the super atv front bumper and 6500 lb winch but destroyed those, now just a bulkhead Utv zilla glass windshield with a fluid sprayer and I still need to put on my ford escape wiper motor Tyndalls custom fab fans with dome lights front and rear Can am cooler Stock clutching Wbb for the last 2, I've only had 3 including original, never broke one, slipped at most 3 times in 3800 miles Rhino 2.0 axles all the way around Fuel 15" wheels, 6 + 1 offset Shock therapy tie rods Ran stock 30 bighorns, 32 trail saws, 35 trail saws, and now 35 zillas A cheap sound system for a wake boat, had 5150 whips, curved light bar, 2 7" light bars Probably some other stuff I'm forgetting. Next plan is plastic & bed delete, cage, and custom metal doors

I’m heading there in a few weeks. I’ve already replaced my diff with the same one. I have 35’s zillas. Great video!

@@3565ke I've got a tik tok and so does nate that have way more short videos of the stuff we do, if you have one

Thanks man we appreciate the support, definitely check out the shorts and tik tok as well that one is BeastMode_SXS 🤙

You aren’t kidding it definitely is no joke! Also Thank you Greatly appreciate it. Laid up from surgery right now, but hopefully sooner then later I can ride again to get some more footage for everyone.

Oh it made it easy once I found the right line I just could see crap so I was shooting in the dark lol

Will do much appreciated 🤙🤙

Thank you greatly appreciate it! We will be back as soon as I possibly can 🤙🤙

Not 100% sure on what tires they are but wanna say they were Mickey Thompson, they are 37x12.5’s

Much appreciated!!

Thank you I appreciate that

Cadillac Hill isn’t super difficult but it is technical lots of good size rocks to maneuver around and over on a decent grade. There are a couple spots that required some momentum and a good bump but nothing to crazy, it is a fun trail though

Yup lol we were trying a different approach to see what would happen and all went to hell 🤣

@@BeastModeSXS I do the same thing. A lot of ppl who don’t go first watch for the line to take but I like to take my own line either way. Usually I pick the harder line, within reason obviously lol

Yup lol

Honestly I thought it but also know the sidewalls on Those are so stiff I figured it was just that🤷‍♂️🤷‍♂️

My machine is far from set up for mud lol I got all of my mudding days out of the way in my early 20’s when I was running trucks lol

🤣🤣 definitely have some good dents in them now

That is just one little part of it, I’m working on posting the rest of it, there is more challenging parts of it. Cadillac hill overall is not super difficult it’s definitely a more technical climb then it is a send it kind of climb

@@BeastModeSXS lookin forward to the full vid. I really need to get my krx out and get it ready and ride. I think I’ve only been out once this whole year. Kinda sad lol

Man that sucks! I was in a car accident and have to have surgery on my shoulder so I may be done for the year😔

@@BeastModeSXS sorry to hear that man. Hope your surgery goes well and speedy recovery

Thank you i appreciate it!

Good thing you don't pay for it then, huh?

Don't mean to dis but legs are better

If that’s all the dumbshit thing you got to say why even say it? At least talk trash with balls and say it like you mean it and not like a f’n 3rd grade trans girl

Thank you greatly appreciate it!

He runs the same tires that I do. I run 7 to 8. We didn't notice he had 11.5 psi until the next day. These sidewalls are strong enough to hold up my machine with 0 air. 11.5 was like riding on steel. I think he would have made it no problem with less air.

They road ride a lot and the trail saws hold up well to it, but I agree with you! lol

@@BeastModeSXS that makes sense. If I did a lot of road riding I’d have to have two sets of tire and wheels. I can’t deal with spinning when I should be gripping lol. Keep it up brother. Y’all get better with every video

@@marka1712 thank you very much I greatly appreciate it!

Thank you for the input, we didn’t get out much on this trail because it was pretty simple overall, I’m currently working on the videos from trail 39, there is a lot more footage from outside for that trail

Thank you! Powerdirector 365 is what I use.

Thank you very much! I greatly appreciate your input and will make sure to pay more attention to making sure we either record something when we head to a new trail or do a voiceover for it! Also the added machines and drivers I have to give props to them we have all met while out trailing and have developed good friendships even though they are all long distance, they are hanging in there with me and dealing with the inconvenience of recording like champs I couldn’t do it without their commitment as well! Stay tuned for more videos I have a couple more from this weekend I’m working on that will be coming out in the next few weeks! Again thank you very much for your support and input!

@@BeastModeSXS No problem brother. I love watching good vids and I love to get a few shots and short vids if I do something cool but I respect the heck out of y’all doin it on this level. I could ride along but recording, voice over/commentary and editing to post is not for me. I don’t have the patience and also I’d have to bleep a fair amount of coverage of the good stuff because I get colorful when excited lol. And yes 👍🏻👍🏻 to those riding with you too. Great to see this kinda stuff and making good friends. I live 40 minutes from the park and rarely to get to go down and now my group has all but quit going all together so I haven’t been in 6-7 months if not longer. Sucks to the point I’ve been thinking about selling my krx and moving on to some other hobby.

Nooo don’t do that lol, we get pretty colorful when we’re excited and amped us as well🤣 makes for some creative editing lol. There is definitely a good amount of work that goes into editing out a whole video but I enjoy it….well most of the time lol

That really sucks you guys don’t go ride much anymore hopefully you guys get the fire back to go out and enjoy it again🤙

Awesome I will let you know the next time we are down there 🤙🤙

We came back again for a quick trip

@@BeastModeSXS nice

It is brutal lol

I’m heading there in September, I’ll definitely be avoiding this spot lmao.

The only way to ride😎🥰

Gotta commit lol

@@BeastModeSXS in a heartbeat 😎💯💯💯💯💯💪💪💪🥰🥰💞💞

🤣🤣

Awesome, it’s a pretty rough one lol airplane hill is dug out bad, we broke a rear axle rolled the 4 seater and watched two built jeep crawlers roll on it as well

Not bad actually the passenger rear had a couple of the screws pulled out but the fenders never pulled completely off, nothing some bigger washers couldn’t fix

I agree every time I watch it lol

Absolutely we can’t wait either!!

10:44 love the timing of Little Mans SEND IT! Lol

That was perfect timing!!!

It absolutely was 🤙🤙 tell him Thank You!! Lol