LateNightGarage

Пікірлер

@RandolphJF 7 күн бұрын

Pretty sure your balance shaft is out of timing

@adrenaline4life233 9 күн бұрын

Did the new gasket work without any rtv? I just replaced everything a few weeks ago and the new gasket is already leaking. I thought it was weird that it was basically just a plastic ring that they call a “gasket” and sure enough it’s not that great. Glad it’s a $3 fix though and easy to get too.

@latenightgarage7895 9 күн бұрын

Mine has not leaked yet.

@adrenaline4life233 8 күн бұрын

Sweet, thank you! Also I checked and I cross threaded the bottom bolt so it’s partly my fault. Guess it’ll be a weekend project soon.

@jellyd4889 21 күн бұрын

Great video, good camera work. nice and clear

@jellyd4889 21 күн бұрын

Use silicon gel on those green rubber-ish o-rings then they FLY in. Without them.... even brute force does not work.

@OneShotOfficial 27 күн бұрын

what tune did you go with?

@latenightgarage7895 26 күн бұрын

ECS Tuning stage 2

@OneShotOfficial 26 күн бұрын

@ thank you!!

@Thats_X_ Ай бұрын

You still have this car?

@latenightgarage7895 Ай бұрын

@@Thats_X_ yeah

@stevenfey3299 Ай бұрын

bro thank you for the clip and thank you for the instruction!

@BrianBrakesIt Ай бұрын

Do you have a version of this video where the reassembly part at the end isn't fast forwarded? A step by step of putting it back together would be a nice inclusion.

@latenightgarage7895 Ай бұрын

@@BrianBrakesIt I do not, figured nobody wanted to see.

@johanfullard9438 Ай бұрын

Do you have a blow off valve or a DV+?

@latenightgarage7895 Ай бұрын

@@johanfullard9438 it’s a Forge Blow Off Valve

@laserenastudios1970 Ай бұрын

would I need to disconnect the battery to do to this?

@latenightgarage7895 Ай бұрын

Wouldn't hurt, it would reset the computer for the clean MAF

@kotymccallister5150 2 ай бұрын

so is the mrev2 plenum just a non revup DE plenum??

@latenightgarage7895 2 ай бұрын

Yeah basically

@kotymccallister5150 2 ай бұрын

@latenightgarage7895 so why would anyone spend mrev2 money when they can just get a non revup plenum? I am reading the mrev2 has been slightly modified. I have read the non revup plenum on a revup will slightly lower peak hp but get quite a lot in the midrange. Does the mrev2 get all the midrange whilst retaining the top end? Could I modify the non revup plenum to perform identically to the mrev2? If so, how?

@latenightgarage7895 2 ай бұрын

Exactly, why spend money on a MRev2. We'll bc you have to buy a plenum still and then have the knowledge to grind it down in the same places the other companies do. It's cheaper if you have the info and tools but quicker just to buy it done.

@kotymccallister5150 2 ай бұрын

@latenightgarage7895 so I guess my last question is: does the mrev2 lower plenum lower the peak hp on a stock revup? Or is it ported so you get the midrange without losing the top end like you would if you just stuck a stock de plenum on a revup?

@latenightgarage7895 2 ай бұрын

If that's what you've read, then probably, it's been a while since I've looked this stuff up. Basically, if you add it to your revup, you'll get some better response and low torque, but it's not gonna make a big difference. What I ended up doing was adding the MRev2, 5/16 spacer, kentix upper intake, 75mm tb, and an injine air intake plus the revup tune, now if you add all of that than you notice a difference.

@leogarcia6001 2 ай бұрын

Where did you get those paper instructions from?

@latenightgarage7895 2 ай бұрын

Website online cost $75 and takes a few day for them to email you. I think it's called factorymanuals.com

@TA-uk2qj 2 ай бұрын

Bro u skipped a whole segment about touching the terminals together? Couldn't really make out what u said.

@antonelkomos5072 2 ай бұрын

You didn’t sand it down first? Did it last?

@latenightgarage7895 2 ай бұрын

@@antonelkomos5072 it's plasti dip, don't need to.

@supjxy 2 ай бұрын

That’s actually crazy for plasti dip lol looks amazing. I want to try but my paint is really faded would it still work?

@latenightgarage7895 2 ай бұрын

Yeah

@WOWEGetEmOsoINKD 3 ай бұрын

So abt how lomg do u think it would take for me to remove and install mine without any breaks

@latenightgarage7895 3 ай бұрын

3-4 hours maybe, I don't remember how long it took me

@MsDRazvan 3 ай бұрын

Do you have a cod error for doing this joob?

@Jaybomb1721 3 ай бұрын

Do you know if the 2007 G35 rev up 6MT still have the short Runners on the intake?

@misterfixit5186 3 ай бұрын

I found a new one for 37. For my Audi. Don't think I'ma waste money on trying anything other than get the new one

@abigailjohnson7819 3 ай бұрын

That's an amazing truck!!

@keagan8006 3 ай бұрын

Love that blue interior is definitely better on these than the lower trims for sure

@latenightgarage7895 3 ай бұрын

Thanks

@normp3273 3 ай бұрын

What year is this car?

@coffee.medic.mcclane 4 ай бұрын

An oil extractor makes this job cake! Do you still have the A4? I just happened on your videos. Great job! Using a torque wrench on the plug is paramount!! Thanks!

@latenightgarage7895 4 ай бұрын

Thanks for watching. Unfortunately, the Audi was totalled out bc of flood damage. It was a awesome car that I will miss but definitely would get another.

@davidvaro1803 4 ай бұрын

Where did you get that heat shield for the air filter

@latenightgarage7895 4 ай бұрын

Not sure it came with the car

@dr.kaim1 4 ай бұрын

there is only 2 screws that have to be taken without disassembling all the pipes U R genis wow

@latenightgarage7895 4 ай бұрын

@@dr.kaim1 you are

@EJR20 20 күн бұрын

This is literally what I just said😂. No need to disassembled NONE of that. Just the two tamperproof torx bolts.

@latenightgarage7895 18 күн бұрын

@EJR20 Sure if your gonna clean the MAF only but I clean the tube that holds it and the tube to the turbo, just didn’t show it. But then again you watch my video so whatever.

@brazeagle 4 ай бұрын

Great job, no so easy without proper tools. Bringing in my AUDI A4 2.0T for the probable same issue, P0299 code. I get the engine light, RESET IT and changed the recirculating valve, then went to highway speed and boosted a 4K RPM and light came back on. That means it was not the recirculating valve and most likely what you just showed. Thanks a lot.

@latenightgarage7895 4 ай бұрын

Could also be a clogged catalytic converter,

@Broski_Nation 4 ай бұрын

Good vid man. But I was surprised you didnt scuff it up with some sand paper before painting. That way the paint sticks to the metal better. How is it holding up so far? Thx!

@latenightgarage7895 4 ай бұрын

@@Broski_Nation their holding up good

@Broski_Nation 4 ай бұрын

@@latenightgarage7895 Awesome. I have to do this for my Blazer. Thx for posting your vid!

@MultiCar5 4 ай бұрын

Good jobs for u bro

@LewisMorra 5 ай бұрын

i heard you can just put a clip on the wastegate arm and itll fix the loose gate issue

@orsencart 5 ай бұрын

Nice to see people still working on these I got the same exact model. any issues with yours? I got the ie catted dp as well as the cai looking forward to doing this install myself 😅

@STV.. 5 ай бұрын

I think that’s turbo flutter I’m hearing, what are all the mods you had on the car besides this exhaust? I want the flutters more than anything lol

@latenightgarage7895 5 ай бұрын

It's a forge BOV

@levicooper4529 6 ай бұрын

Do you need to disconnect fuel lines?

@JimOnFoot 6 ай бұрын

Also curious about this..

@latenightgarage7895 6 ай бұрын

Doesn't look like I did.

@idajosefin0121 6 ай бұрын

Did you have any other symtoms? I have an Audi A4 AVANT 2.0 TDI 190 hp that has this warning coming up about system fault and it goes into limpmode. After restart the warning is gone and the car acts like it should for about 2 weeks before it throws the warning again. Faultcode P029900 turbo underboost. Audi stated that they found a faulty boost pressure sensor and replaced it but three days after the warning returned....getting sick of this

@latenightgarage7895 6 ай бұрын

Could be a clogged catalytic converter, I swapped to ECS Tuning FHC. A while after this video, the code showed up, so I went to a mechanic, and they pointed out that the O2 sensor before the catalytic converter was hotter than it should be. So I swapped out the cat and haven't had the boost code again.

@Lolatyou332 6 ай бұрын

I have a standard de 350z 2005 enthusiast, some reason it already had an MREV2 but previous owners did not modify it at all.. not sure why I have an mrev2

@latenightgarage7895 6 ай бұрын

They changed the lower plenums in the 06 and 07.

@GHOST.RIDER.H2 6 ай бұрын

why dont you just put the e-brake on???

@latenightgarage7895 6 ай бұрын

For the front rotors

@JayDay-f9d 6 ай бұрын

Tool sizes????

@latenightgarage7895 6 ай бұрын

Did i not say the size?

@MrBreaktheBanK 6 ай бұрын

My g35 gets pretty hot could the thermostat be a reason

@latenightgarage7895 6 ай бұрын

Look up the symptoms on an Infinity form.

@stoyan2147 6 ай бұрын

How many miles are on the Audi while you where doing the timing chain ?

@latenightgarage7895 6 ай бұрын

Like 140k, I think

@johnp7408 6 ай бұрын

Just not understanding how a loose wastegate got tightened by just heating it up

5 ай бұрын

He didn't show the one thing the whole point of the video was for. He held the wastegate open by its rod, then heated it up and slightly bent the internal arm that holds the waste gate flapper or door. It compensates for the sloppy, worn out arm and rod pivots, and holds wastegate door tighter against opening, preventing boost leak, preventing the under boost dtc code from appearing.

@latenightgarage7895 5 ай бұрын

What fixes that code?

@salviog_ 6 ай бұрын

Thank you sir

@s3ood105 6 ай бұрын

I think u have forgotten to till to unplug the battery it's very important... thanks

@latenightgarage7895 6 ай бұрын

Yeah, I should have added that.

@reidpoltrok4827 7 ай бұрын

Dude that’s awesome want to dip my car aswell how much does it roughly cost for good quality dip?

@latenightgarage7895 7 ай бұрын

Six to seven hundred.

@pin2acoladas 7 ай бұрын

it looked better before

@latenightgarage7895 7 ай бұрын

Yeah, but gotta move on. Might add the Nismo decals again 🤔 but I'm not sure yet.

@LDamas-qt2ch 7 ай бұрын

Dope!

@m00dmvzik 7 ай бұрын

The music is really low bro. You might need to re-upload the video after fixing the sound

@latenightgarage7895 7 ай бұрын

It's just supposed to be quiet, so it's not silent.

@m00dmvzik 7 ай бұрын

@latenightgarage7895 oh ok. I was falling asleep almost, lol. Nice G though. I have n 04 sedan.

@Nibiru420 7 ай бұрын

@@latenightgarage7895 Don't listen to that butt sniffer. The volume is perfect, not blowing my eardrums out and nice and relaxing.

@latenightgarage7895 7 ай бұрын

Lol

@aceytoja 7 ай бұрын

champion, this is exactly what I was looking for

@Squeedlyspooch3 7 ай бұрын

You shouldn't really smell fuel with a high flow cat unless your tune is too rich. For reference, I'm running catless longtubes on a 600hp supercharged v8 (e55 amg) i dont smell fuel unless im full throttle, normal druving is fine

@pierres3x 7 ай бұрын

where can you get the fitting for the coolant lines

@latenightgarage7895 7 ай бұрын

To connect the two coolant lines?

@Banduprik 7 ай бұрын

@@latenightgarage7895yes, I was wondering too lol

@frazerboyum2370 5 ай бұрын

@@latenightgarage7895yeah i was wondering the same thing

@B8_ghostt 7 ай бұрын

Was that a timing chain rattle when you started the car 😳

@latenightgarage7895 6 ай бұрын

Not sure I just replaced it before this video.

@twoc400s5 8 ай бұрын

I ran my supertech for 100 miles after I drained my castrol. I would recommend Wix filter to you, definitely superior in most applications to the K&N.

Ең жақсы KZbin

Пікірлер