I like the part when you didn’t show any of the important stuff.

Very good video bro! Im having to do this exact job on my 03 Frontier. Ive seen people just hammer the old seal off the driveshaft in equal strokes around the bearing.

How do you remove the adjuster cylinder

Need to see how you connect to adjuster and how it’s adjusted.

Thank you for sharing. I’m changing mine this afternoon. This video was very helpful.

Is you're stick shift or automatic trans

Thanks man, that was clear instruction!! Bummer about the snap rings but props for working through it. I'm working on the same issues (output seal leak, dead center bearing, pinion seal leak). I was able to ge tthe shafts out, but am hose on the center bearing. need OG puller! I didn't count threads when I popped the nut off the diff yoke, so I hope it's not problematic with tension putting it back together. Do you have any tips or tricks for getting the center bearing off the shaft (w.o having the sweet puller ;) ? I'm thinking chisel and sledge with copious lube and time... Anyhoo, thanks for posting this vid, your explanation and demos are clear and helpful!

Excellent vid, thank you! Doing this job now.

Should have taken out that fuse first and started it up and ran it before you took the air filter off....

Gabe I'm trying to buy a 94 4-cylinder 5-speed manual with 103,000 mi on it. If it runs good and the clutch is still good what do you think I should offer? It's been sitting for 4 years.

Thank you for this video. Saved me on a trip!! 😅

do you know what orange box is next to firewall, is that relay? on 1997 nissan hardbody on passenger side

Hey Gabe, my rpms are erratic at idle. Not high or low just erratic. What you think?

Don't show eh band in

Hey dude i have a 97 Nissan hardbody as well and recently I’ve been driving it at high speed in 5th gear and then all of a sudden lose acceleration even with pedal to the metal. I pull over and try to pull out again in 1st and then the car struggles to go forward and jerks as if losing drive or ability to go forward. Eventually started to overheat. I researched it and it said maybe could Be a fuel filter problem. I’ve been told by my shop I need to replace it but when I brought it in for this problem they couldn’t find anything wrong. Let me know thanks

Your video did what it said it was going to do!!! Thank you

Hey bro I was wondering if you could help me with a problem I’ve been having. I have a 86’ automatic hardbody, and the problem I have is it leaks transmission oil from the tail housing where the drive shaft goes. I’ve replaced the seal about three times with three different seals that appear to be the same but it keeps leaking. Which seal is the one that goes in the transmission extension housing (tail housing)? I’ve looked everywhere and can’t find a seal that keeps it from leaking. If you could do a video on that it would be some tremendous help!

Hey that thing you unplugged whats that part called because mine came off and i literally cannot find the part to replace it

Cool man, any chance you can do a video on adding or changing transmission fluid? Bought a Nissan xe

Hey great job. So are all 3 u joints the same part number on your truck? Or were they different numbers depending where they were front - center - rear ?

I have a 91 never had any problems with my old girl until dealing with the U joints Staked in U joints Smh

guess what you don't have to file down the snap rings just tap the yokes a couple times and everything loosens up perfectly my ideas come from 40 years of mechanicing

Thanks for sharing. Are all 3 the same u joint?

Thanks for the video, does the center support bearing slide back on with ease?

Where did you get the part at?

I am having trouble taking off the 4 back bolts of the driveshaft any advice? I have tried lots of w-40

gear puller......

i love you 😊

Is fluid supposed to come out the transmission after removing driveshaft?

any chance you live in vegas? lol im trying to replace the center support bearing on my 2001 frontier and maybe the u joints and seals like you did if i have too and it would be nice to have someone that could help me do it for a little bit of cash.

Thank you so much for this! I’ve been trying to diagnose this rear end power sway:)

D22