I get smoke and no flames

just bought one today

Trying to open this up so I can remove the audio component from the motherboard. Unscrewed it, but unclipping the case is a bitch.

This happened to me in 2020 I had a great laugh he would send me texts several times a day in the mean time I actually traced him down & I was shocked

I was forced to install these in my buy to let in order to get the EPC level. They cost a fortune, are ugly and dont really work out any cheaper. I have advised my tenant to use normal panel heaters and get rid of the eco 7 tarrif. Complete waste of my time and money

They charge only if is cold in the house overnight? From 2 nights they do not charge anymore, is it because is not so cold anymore?

I've found no recent ads for this device (I'm in California) and wonder if they've pulled it due to part failures. It doesn't speak well of Dimplex UK that they see these are customers comments on their advert and see fit to ignore them.

Quite confusing to use. they need better manuals! 1st. you need to set the "charging" times to charge during off peak periods. 2nd you need to select "heating source / storage" so that the heater releases only the stored electricity (heat) and doesnt draw peak electricity at the same time. I had mine charged up and it was still using around 0.40 pence / hour. Took me a few hours inside the menu options to figure it out. Now its blowing hot air as it should and my meter shows 0.02 pence /hour which are probably other electronics in the house.

Hey Dimplex, how do u dust logs?????

Is the fire purpose to make a humming noise

My full house is full of these they cost a fortune and there always stone cold

Mine doesn’t work just bought a few weeks ago no heat no fan

Heats up red hot during the night, despite output turned to zero.

If the insulation worked, they'd be okay. As it is, the whole concept of storage heaters is nonsensical. You may as well try to collect and store light.

This thing seems to be giving out heat outside the specified times i gave it? How and when does this thing actually start imput as opposed to giving output? My old flat had specific dials for input and output.

Recently had the QM150 installed and really impressed 🙂

During winter, should the main switch of storage heaters be ON 24 hours a day? Will this not attract increased electricity bill each month? Also, Input high and output low during night? And output high and input low during day? Please if anybody can guide me

Is it possible to change these for a led bulb? I have a Dimplex SAL 20E where the bulbs are directly above three halogen bars. Some leds are of a type of plastic. Could they possibly melt considering heat and position? Any suggestions?

Hi. What is that ticking noise just before the heater comes on, then ticks again before it goes off

What is that count down ticking noise that comes on and off ???

dont understand how these work. I have Quantum 125 model installed but its cold in touch after morning with factory settings. what are most efficiant eco 7 settings and timings to save money on these? confused about settings it doesn't say anything about off peak.

Hi I have it installed last week. Why can I not see the display during the day? For this heater I use economy 7 electricity line. The display should be available when3i want. I believe there is a battery inside for the display?

Could this have been used when Moses talked to the burning bush that never consumed itself?

Absolutely fautless and tit heats my entire hallway and living room. From all the heating this is one I use the most, i have it on a timer to warm the house at night and use it when necessary during winter days.

Mine gives cold air the fan one..even when i put on 30° how u fix that?

I like the idea of mixing different kinds of heaters in one.

Issue for me is my work schedule is nuts. I don't work consistent shifts through the week so one week I might do 4 days 1pm to midnight and then a day off then 2 days 7am to 5pm. Trying to sync my heating to my schedule is impossible. Why not just make a central thermostat for these things?

Que horrible el arrastre de las cuerdas en la canción de guitarra.😅

Bought it in November/December and recently had it installed and so far I love it.

Removed a section in my camper where the entertainment area is and installed. Works great. Instead of propane furnace heat, I can use this kzbin.infoUgkxATHBlMJwipGgVWseuAFKvDQ_5R4_lywo to heat the camper as long as it's hooked up to shore power. Only thing I do not like is there does not seem to be a thermostat. I'm presuming it has a built-in one so it does not overheat. Really like all the other color options it has to offer.

Removed a section in my camper where the entertainment area is and installed. Works great. Instead of propane furnace heat, I can use this kzbin.infoUgkxATHBlMJwipGgVWseuAFKvDQ_5R4_lywo to heat the camper as long as it's hooked up to shore power. Only thing I do not like is there does not seem to be a thermostat. I'm presuming it has a built-in one so it does not overheat. Really like all the other color options it has to offer.

If its cold enough. It doesnt

Thank you

How noisy are they could they be fitted near a bedroom? Would the noise be noticeable

Incredible Irish company

My danville has stopped working, how do I find dimplex engineer near me, not having much luck

Hi Dimplex, I recently move to an apartment with QUANTUM QM150. However, I don't seem to understand how it works. Putting on the heaters even at high temperatures of 27/28/29. The whole room is still cold, I can't feel the impact of the heater at all. I just see as a waste of my electricity bill. I have watched several videos, read the manual over and over, I don't seem to get any answer. I would be glad if this can be look into and maybe further explanation rendered. Thanks

RUBBISH! We got 3 of this absolutely terrible does not heat spending lot of electricity

None of this helps!!!!!!!

Sorry got new bulbs but not sure about replacing thank you

Love my fire but bulbs are gone and not sure what to do

Ive inherited fire with house so no booklet. Don’t know model. Cant see any screws where video says

How do you change the light bulb in this model of fire. Screw the back of ? Can't find any at front of it

How do I adjust the smoke effect?

No installation? Surely a cable has to be run to it? Presumably via a drilled hole? Otherwise you'd not have the clean look in the video or will have a trip hazard. No cable visible in the video, how is it routed?

How can make my qm100rf to charge only during a certain period of the night tariff and not to charge at during the day. I am using e7 tarrif but my heater is wrongly connected to the day time circuit so my option is to control my charging time manually by switching them on night time and switch off on approaching day time tarrif

I have no flame effect but the logs glow

Robot voice - get a human

What a load of beer wax

How much time it does exactly takes to heat up and down, considering I am switching On and Off twice a day?